Premium Stock

Link Tears of the Kingdom 3D Printing Figurine | Assembly

(2)
cm: 19.4 w x 13.7 d x 22 h
in: 7.638 w x 5.394 d x 8.661 h

Source Files

|

Description

|

Printing Details

This 3D model of Link Tears of the Kingdom consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 4 versions of  Link Tears of the Kingdom STL files for FFF/FDM, DLP/SLA, DLP/SLA Eco, SLS - files for all versions are available for download after the purchase;
  • STL files of high-poly  Link Tears of the Kingdom Figurine for 3D printing consist of 71 files;
  • Sizes for:
  • FFF/FDM: 220 mm tall, 194 mm wide, 137 mm deep;
  • DLP/SLA/SLS: 110 mm tall, 97 mm wide, 69 mm deep;
  • Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
  • Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
2_hair_R_FDM(repaired).st l
9.31 MiB 15 min <1 m 28 x 11 x 11 Download
3_hair_L_FDM(repaired).st l
9.02 MiB 9 min <1 m 9 x 26 x 9 Download
4_ponytail_FDM(repaired). stl
11.56 MiB 14 min <1 m 12 x 7 x 22 Download
5_body_FDM(repaired).stl
62.71 MiB 3 h 44 min 2 m 39 x 34 x 45 Download
6_legs_FDM(repaired).stl
33.34 MiB 14 h 7 min 9 m 76 x 64 x 86 Download
7_arm_R_1_FDM(repaired).s tl
18.55 MiB 60 min 1 m 28 x 25 x 22 Download
8_arm_R_2_FDM(repaired).s tl
25.90 MiB 1 h 33 min 1 m 17 x 24 x 59 Download
9_arm_L_1_FDM(repaired).s tl
18.43 MiB 1 h 23 min 1 m 37 x 22 x 34 Download
10_arm_L_2_FDM(repaired). stl
18.20 MiB 39 min <1 m 15 x 15 x 28 Download
11_hand_L_FDM(repaired).s tl
12.62 MiB 27 min <1 m 14 x 11 x 25 Download
12_foot_R_FDM(repaired).s tl
17.18 MiB 1 h 42 min 1 m 33 x 39 x 48 Download
13_foot_L_FDM(repaired).s tl
17.43 MiB 1 h 42 min 1 m 23 x 33 x 51 Download
14_sword_V1_FDM(repaired) .stl
15.83 MiB 1 h 49 min 1 m 101 x 34 x 31 Download
15_sword_V2_FDM(repaired) .stl
17.10 MiB 52 min <1 m 57 x 35 x 18 Download
16_pouch_FDM(repaired).st l
11.15 MiB 12 min <1 m 15 x 15 x 10 Download
17_shoulder_pad_L_FDM(rep aired).stl
12.84 MiB 36 min <1 m 25 x 24 x 11 Download
18_arrow_quiver_FDM(repai red).stl
19.75 MiB 1 h 22 min 1 m 59 x 20 x 15 Download
19_arrow_1_FDM(repaired). stl
7.42 MiB 25 min <1 m 45 x 2 x 26 Download
20_arrow_2_FDM(repaired). stl
7.68 MiB 24 min <1 m 50 x 2 x 23 Download
21_arrow_3_FDM(repaired). stl
7.49 MiB 24 min <1 m 50 x 2 x 23 Download
22_shield_FDM(repaired).s tl
23.47 MiB 7 h 40 min 6 m 60 x 99 x 38 Download
23_handle_shield_FDM(repa ired).stl
8.72 MiB 40 min <1 m 47 x 9 x 18 Download
24_scabbard_FDM(repaired) .stl
15.98 MiB 1 h 45 min 1 m 92 x 12 x 32 Download
25_bow_FDM(repaired).stl
17.64 MiB 1 h 49 min 1 m 137 x 106 x 30 Download
26_bow_string_FDM(repaire d).stl
3.03 MiB 7 min <1 m 2 x 137 x 2 Download
27_platform_FDM(repaired) .stl
41.82 MiB 24 h 52 min 13 m 126 x 137 x 49 Download
28_ge_lock_7S(x1)_FDM(rep aired).stl
0.02 MiB 4 min <1 m 7 x 18 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min 1 m 150 x 18 x 5 Download
1_head_FDM(repaired).stl
31.68 MiB 2 h 16 min 1 m 33 x 34 x 36 Download
...

ABOUT THIS 3D MODEL

Link, also known as the Hero of Time or the Hero of Winds, is the protagonist of the action-adventure video game series The Legend of Zelda. A brave young boy who doesn’t fear dangerous missions is always ready to set off for adventures and save the world from evil forces threatening it. In the Tears of the Kingdom the events take place after the Breath of the Wild. Link embarks on a journey once again to find Zelda and defeat the extremely powerful Gerudo warlock Ganondorf.

Inspired by the The Legend of Zelda: Tears of the Kingdom sequel, the author of Link presented his version of the figurine. The character’s appearance in the sequel is similar to the Breath of the Wild's incarnation of Link. The hero is pictured in a short-sleeved tunic over a chainmail and a long-sleeved shirt and pants with boots with multiple belts. Link is standing in a tense posture, in his right hand we can see the Master Swords, Link’s signature weapon. In Tears of the Kingdom the weapon was shattered by Ganondorf's power and now only half of the magic sword is left.  The Hylian Shield and the Fairy Bow with Fire Arrows behind the Link’s back serve as additional weapons for the hero. The legendary elven warrior from one of the most popular video games of our times will make your collection truly magical! 

ADAPTATION FOR 3D PRINTING

Link Tears of the Kingdom for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 64 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the hero to be depicted harmoniously in the intended pose.

The figurine’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, Link was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and "Assembly Manual" before getting down to  Link Tears of the Kingdom.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The figurine’s scale was calculated from the height of Link. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 versions features:

  • Contains 28 parts;
  • A printed figurine is 220 mm tall, 194 mm wide, 137 mm deep;
  • Two sword options;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 versions features:

  • Contains 19 parts;
  • A printed figurine is 110 mm tall, 97 mm wide, 69 mm deep;
  • Two sword options;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 versions features:

  • Contains 19 parts;
  • A printed figurine is 110 mm tall, 97 mm wide, 69 mm deep;
  • Two sword options;
  • Some parts are manually hollowed out to save resin.

SLS 1.0 versions features:

  • Contains 5 parts - a solid Link figurine on and separately from the stand.

You can get the figurine of  Link Tears of the Kingdom for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble  Link Tears of the Kingdom 3D Printing Figurine on Gambody YouTube channel.

Also, you may like Legend of Zelda 3D Printing Figurines.

_______

FAQ: 

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

  • You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
  • All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download


Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings