Cloud Strife 3D Printing Figurine | Assembly

(4)
cm: 16.9 w x 15.8 d x 31 h
in: 6.654 w x 6.22 d x 12.205 h

Source Files

|

Description

|

Printing Details

This 3D figurine of Cloud Strife consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 4 versions of Cloud Strife STL files for FFF/FDM, DLP/SLA, DLP/SLA Eco, SLS - files for all versions are available for download after the purchase;
  • STL files of high-poly Cloud Strife Figurine for 3D printing consist of 35 files;
  • Sizes for:
  • FFF/FDM: 310 mm tall, 169 mm wide, 158 mm deep;
  • DLP/SLA/SLS: 155 mm tall, 85 mm wide, 79 mm deep;
  • Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
  • Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
34.86 MiB 4 h 19 min 2 m 33 x 41 x 47 Download
2_body_FDM(repaired).stl
40.79 MiB 4 h 15 min 2 m 37 x 33 x 60 Download
3_legs_FDM(repaired).stl
39.38 MiB 10 h 44 min 6 m 75 x 54 x 112 Download
4_arm_R_1_FDM(repaired).s tl
15.20 MiB 49 min <1 m 34 x 22 x 32 Download
5_arm_R_2_FDM(repaired).s tl
18.18 MiB 21 min <1 m 15 x 13 x 19 Download
6_hand_R_FDM(repaired).st l
14.92 MiB 24 min <1 m 16 x 13 x 16 Download
7_arm_L_1_FDM(repaired).s tl
13.25 MiB 1 h 5 min 1 m 40 x 23 x 33 Download
8_arm_L_2_FDM(repaired).s tl
17.06 MiB 49 min <1 m 18 x 19 x 25 Download
9_hand_L_FDM(repaired).st l
13.46 MiB 25 min <1 m 15 x 13 x 19 Download
10_foot_R_FDM(repaired).s tl
26.23 MiB 1 h 12 min 1 m 20 x 37 x 29 Download
11_foot_L_FDM(repaired).s tl
25.90 MiB 1 h 14 min 1 m 20 x 37 x 30 Download
12_scapular_FDM(repaired) .stl
25.98 MiB 41 min <1 m 21 x 25 x 18 Download
13_sword_FDM(repaired).st l
46.30 MiB 4 h 4 min 2 m 156 x 153 x 39 Download
14_sword_handle_FDM(repai red).stl
10.12 MiB 28 min <1 m 7 x 7 x 49 Download
15_platform_FDM(repaired) .stl
28.81 MiB 17 h 28 min 9 m 125 x 133 x 32 Download
16_ge_lock_10H(x1)_FDM(re paired).stl
0.03 MiB 4 min <1 m 10 x 18 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min 1 m 150 x 18 x 5 Download
...

ABOUT THIS 3D MODEL

There are several factors that contributed to the success of Final Fantasy VII, and the most decisive of them, according to the producer of the video game, is its cast of characters and the possibility of deep exploration of their personalities. FF VII protagonist, Cloud Strife, is a mercenary who joins the resistance group AVALANCHE to withstand the Shinra mega-corporation responsible for draining life from the planet and fights against his archenemy Sephiroth whose mission is to become the ultimate power over every soul. Cloud is shown as a stoic and selfless individual with a protective nature for his friends and for the planet.

The cult video game character made a huge impression on our contributing 3D artist who sculpted this incredible figurine for 3D printing. The hero is depicted in his typical outfit consisting of baggy pants with a sleeveless shirt and a belt, the spiked pauldron and gauntlets serve for arm protection, while the large Buster Sword, the trademark weapon of the character, rests on his right shoulder. The facial features of the protagonist and his recognizable spiky hair are designed with high precision thanks to the skill of the author which cannot but cause admiration. Don’t wait another minute to add Cloud Strife to your 3D printing to-do list! 

ADAPTATION FOR 3D PRINTING

Cloud Strife for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 55 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the soldier to be depicted harmoniously in the intended pose.

The figurine’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, the mercenary was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and "Assembly Manual" before getting down to Cloud Strife figurine for 3D printing.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The figurine’s scale was calculated from the height of Cloud Strife which is 1730 mm. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 versions features:

  • Contains 16 parts;
  • A printed figurine is 310 mm tall, 169 mm wide, 158 mm deep;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 versions features:

  • Contains 8 parts;
  • A printed figurine is 155 mm tall, 85 mm wide, 79 mm deep;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 versions features:

  • Contains 8 parts;
  • A printed figurine is 155 mm tall, 85 mm wide, 79 mm deep;
  • Some parts are manually hollowed out to save resin.

SLS 1.0 versions features:

  • Contains 3 parts - a solid Cloud Strife figurine on and separately from the platform.

You can get the figurine of Cloud Strife for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Cloud Strife 3D Printing Figurine on Gambody YouTube channel.

Also, you may like Sephiroth 3D Printing Figurine and Final Fantasy 3D Printing Figurines.


_______

FAQ: 

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

  • You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
  • All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings