Premium Stock

MWO Classic MadCat 3D Printing Model | Assembly + Action

(15)
cm: 16.5 w x 11.8 d x 21 h
in: 6.496 w x 4.646 d x 8.268 h

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

MadCat Classic MWO 3D Printing Model comes in 3 versions for FFF/FDM and DLP/SLA/SLS 3D printers types. Files for each version are available for download after the purchase.

Detailed information about this model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
01_madcat_hip (repaired). stl
0.01 MiB 21 min <1 m 39 x 10 x 6 Download
02_madcat_hip_b (repaired ).stl
0.25 MiB 1 h 40 min 1 m 42 x 56 x 8 Download
03_madcat_hip_c (repaired ).stl
0.13 MiB 16 min <1 m 10 x 10 x 18 Download
04_madcat_hip_d (repaired ).stl
0.47 MiB 1 h 35 min 1 m 44 x 57 x 8 Download
05_madcat_hip_e (repaired ).stl
0.03 MiB 18 min <1 m 13 x 16 x 19 Download
06_madcat_thigh_LEFT (rep aired).stl
0.05 MiB 1 h 20 min 1 m 16 x 68 x 31 Download
07_madcat_thigh_Right (re paired).stl
0.06 MiB 1 h 21 min 1 m 16 x 68 x 31 Download
08_madcat_thigh_b (repair ed).stl
0.32 MiB 30 min <1 m 24 x 24 x 14 Download
09_madcat_thigh_c (repair ed).stl
0.09 MiB 26 min <1 m 21 x 21 x 12 Download
10_madcat_thigh_d (repair ed).stl
0.03 MiB 7 min <1 m 6 x 6 x 14 Download
11_madcat_joint_tpe_01 (r epaired).stl
0.07 MiB 8 min <1 m 10 x 7 x 8 Download
12_madcat_knee_joint_righ t (repaired).stl
0.02 MiB 29 min <1 m 17 x 14 x 21 Download
13_madcat_knee_joint_left (repaired).stl
0.03 MiB 28 min <1 m 17 x 14 x 21 Download
14_madcat_knee_joint_cove r (repaired).stl
0.00 MiB 8 min <1 m 17 x 17 x 5 Download
15_madcat_foot (repaired) .stl
0.13 MiB 1 h 23 min 1 m 37 x 36 x 17 Download
16_madcat_foot_cover (rep aired).stl
0.65 MiB 35 min <1 m 25 x 26 x 13 Download
17_madcat_foot_vent (repa ired).stl
0.03 MiB 3 min <1 m 9 x 12 x 2 Download
18_madcat_ankle_ball_join t (repaired).stl
0.22 MiB 29 min <1 m 9 x 9 x 34 Download
19_madcat_ankle_ball_join t_TPE_02 (repaired).stl
0.27 MiB 17 min <1 m 17 x 17 x 11 Download
20_madcat_toe_1 (repaired ).stl
0.05 MiB 15 min <1 m 12 x 18 x 12 Download
21_madcat_toe_2 (repaired ).stl
0.06 MiB 20 min <1 m 15 x 15 x 13 Download
22_madcat_toe_3 (repaired ).stl
0.05 MiB 15 min <1 m 11 x 19 x 12 Download
23_madcat_toe_4 (repaired ).stl
0.06 MiB 18 min <1 m 14 x 13 x 15 Download
24_madcat_foot_paw (repai red).stl
0.01 MiB 16 min <1 m 28 x 29 x 3 Download
25_madcat_shank_01 (repai red).stl
0.02 MiB 1 h 29 min 1 m 16 x 46 x 65 Download
26_madcat_shank_02 (repai red).stl
0.26 MiB 40 min <1 m 14 x 29 x 24 Download
27_madcat_shank_tank_01 ( repaired).stl
0.08 MiB 22 min <1 m 24 x 30 x 7 Download
28_madcat_shank_tank_02 ( repaired).stl
0.08 MiB 22 min <1 m 30 x 24 x 7 Download
29_madcat_shank_heatsink (repaired).stl
0.01 MiB 7 min <1 m 14 x 17 x 6 Download
30_madcat_shank_heatsink_ fin (repaired).stl
0.04 MiB 6 min <1 m 11 x 13 x 5 Download
31_madcat_knee_joint_stop (repaired).stl
0.08 MiB 11 min <1 m 17 x 17 x 7 Download
32_madcat_joint_tpe_03 (r epaired).stl
0.30 MiB 14 min <1 m 14 x 22 x 9 Download
33_madcat_body_07 (repair ed).stl
0.22 MiB 2 h 7 min 1 m 36 x 56 x 32 Download
34_madcat_body_06 (repair ed).stl
0.03 MiB 1 h 20 min 1 m 44 x 63 x 11 Download
35_madcat_body_04 (repair ed).stl
0.22 MiB 7 h 34 min 4 m 50 x 53 x 46 Download
36_madcat_body_05 (repair ed).stl
1.19 MiB 6 h 12 min 4 m 47 x 55 x 68 Download
36_madcat_body_05(no logo ) (repaired).stl
0.75 MiB 6 h 12 min 4 m 47 x 55 x 68 Download
37_madcat_body_10 (repair ed).stl
0.02 MiB 16 min <1 m 43 x 13 x 3 Download
38_madcat_body_11 (repair ed).stl
0.02 MiB 16 min <1 m 13 x 43 x 3 Download
39_madcat_body_01 (repair ed).stl
0.05 MiB 25 min <1 m 38 x 12 x 9 Download
40_madcat_body_03 (repair ed).stl
0.30 MiB 31 min <1 m 33 x 17 x 5 Download
41_madcat_body_02 (repair ed).stl
0.04 MiB 25 min <1 m 46 x 28 x 8 Download
42_madcat_body_08 (repair ed).stl
0.07 MiB 28 min <1 m 22 x 21 x 16 Download
43_madcat_body_08_pin (re paired).stl
0.05 MiB 7 min <1 m 6 x 6 x 13 Download
44_madcat_2nd_cannon (rep aired).stl
0.17 MiB 30 min <1 m 9 x 7 x 44 Download
45_madcat_arm_01 (repaire d).stl
0.30 MiB 26 min <1 m 19 x 19 x 16 Download
46_madcat_arm_02 (repaire d).stl
0.06 MiB 17 min <1 m 10 x 10 x 19 Download
47_madcat_arm_03 (repaire d).stl
0.75 MiB 30 min <1 m 15 x 13 x 31 Download
48_madcat_body_12 (repair ed).stl
0.05 MiB 23 min <1 m 24 x 23 x 11 Download
49_madcat_rocket_box (rep aired).stl
0.06 MiB 2 h 28 min 1 m 32 x 33 x 34 Download
50_madcat_rocket_box_cove r (repaired).stl
0.22 MiB 31 min <1 m 29 x 31 x 3 Download
51_madcat_rocket (repaire d).stl
6.51 MiB 21 min <1 m 27 x 28 x 5 Download
52_madcat_wrist (repaired ).stl
0.09 MiB 31 min <1 m 17 x 26 x 16 Download
53_madcat_main_cannon_1 ( repaired).stl
0.08 MiB 1 h 20 min 1 m 19 x 27 x 39 Download
54madcat_main_cannon_2 (r epaired).stl
0.04 MiB 13 min <1 m 19 x 26 x 5 Download
55_madcat_main_cannon_3 ( repaired).stl
0.20 MiB 8 min <1 m 9 x 15 x 8 Download
56_madcat_main_cannon_shi eld (repaired).stl
0.03 MiB 1 h 49 min 1 m 27 x 54 x 26 Download
57_madcat_main_cannon_shi eld_2 (repaired).stl
0.01 MiB 11 min <1 m 9 x 22 x 7 Download
58madcat_main_cannon_4 (r epaired).stl
0.03 MiB 1 h 7 min <1 m 19 x 26 x 32 Download
59_madcat_wrist_pin (repa ired).stl
0.13 MiB 7 min <1 m 7 x 8 x 17 Download
60_madcat_main_cannon_02 (repaired).stl
0.48 MiB 31 min <1 m 11 x 17 x 30 Download
...

HISTORY OF MADCAT

MadCat is a fast heavy MechWarrior that was first introduced in 2945 as a representative of the OmniMech Clan. Its design is so remarkable and distinctive that has eventually become emblematic of the BattleTech universe in general. Though its official name is Timber Wolf, the deadly Mech is widely known as MadCat bearing a certain resemblance both to Marauder (Mad) and Catapult (Cat). The first time the nickname was designated to the Mech was when Inner Sphere’s targeting computer couldn’t identify it between the two. MadCat is actually much more powerful than both MechWarriors. Hardly had it been created when Clan Wolf as well as any other Clan immediately understood its great value. Timber Wolf can boast an impressive combination of energy and missile weaponry that guarantees a considerable firepower during the hottest of confrontation.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from MadCat's actual height that is 12600 mm. The 3D printing model's chosen scale is 1/60 for the FFF/FDM version and 1/100 for the DLP/SLA/SLS version.

FFF/FDM 2.0 version features:
- Contains 71 parts;
- A printed model stands 210 mm tall, 165 mm wide, 118 mm deep;
- The assembly kit includes a lock (69_Ge_lock_10H_x19) that needs to be printed 19 times;
- Action figure with fully movable legs and arms;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA/SLS 1.0 version features:
- Contains 10 parts;
- A printed model stands 128 mm tall, 99 mm wide, 70 mm deep;
- The version is only partially articulated, i.e. has movable joints in feet and elbows only; hip, pelvis, and shoulder connections can change their angles;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed;

FFF/FDM 1.0 version features:
- Contains 112 parts;
- A printed model stands 210 mm tall, 165 mm wide, 118 mm deep;
- The initial version of the model released in 2016.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of MadCat 3D Model for 3D printing which consist of 193 parts;
- 3 versions of files for this model for FFF/FDM and DLP/SLA/SLS 3D Printers;
- High-poly detailed model of MadCat Classic Mech Warrior;
- Detailed settings that we provide for Cura , Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get Model of MadCat Classic Mech Warrior for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble MadCat Classic Mech Warrior 3D Printing Model at Gambody YouTube channel.

Also, you may like other Mech Warrior 3D Printing Models.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

  • You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
  • All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings