This should take overall.
Bebop 3D Printing Figurine | Assemble
Source Files
|
Description
|
Printing Details
This 3D Model of Bebop TMNT consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.
Before printing the files, we strongly recommend reading the PRINTING DETAILS section.
WHAT WILL YOU GET AFTER PURCHASE?
- 4 versions of Bebop TMNT STL files for FFF/FDM and DLP/SLA - files for all versions are available for download after the purchase;
- STL files of high-poly Bebop 3D Model for 3D printing consist of 58 files;
- Sizes for:
- FFF/FDM: 255 mm tall, 194 mm wide, 162 mm deep;
- DLP/SLA/SLS: 128 mm tall, 97 wide, 81 mm deep;
- Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
- Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
- Full technical support from the Gambody Support Team.
Detailed information about this 3D printing model is available in the DESCRIPTION section.
|
|||||
|---|---|---|---|---|---|
| File Name | File Size | Time / Filament | Object Size (x/y/z mm) |
||
|
1_body_FDM(repaired).stl |
88.53 MiB | 46 h 53 min 26 m | 93 x 104 x 132 | Download | |
|
2_legs_FDM(repaired).stl |
76.38 MiB | 28 h 58 min 15 m | 93 x 84 x 117 | Download | |
|
3_arm_R_FDM(repaired).stl |
19.06 MiB | 6 h 31 min 4 m | 59 x 57 x 55 | Download | |
|
4_hand_R_V_1_FDM(repaired ).stl |
22.51 MiB | 9 h 32 min 5 m | 30 x 67 x 126 | Download | |
|
5_hand_R_V_2_FDM(repaired ).stl |
17.91 MiB | 4 h 46 min 2 m | 23 x 51 x 63 | Download | |
|
6_arm_L_FDM(repaired).stl |
24.83 MiB | 5 h 52 min 4 m | 71 x 44 x 62 | Download | |
|
7_hand_L_V_1_FDM(repaired ).stl |
22.35 MiB | 9 h 53 min 5 m | 40 x 89 x 74 | Download | |
|
8_hand_L_V_2_FDM(repaired ).stl |
21.78 MiB | 3 h 17 min 2 m | 32 x 48 x 45 | Download | |
|
9_foot_R_FDM(repaired).st l |
25.11 MiB | 1 h 47 min 1 m | 36 x 51 x 22 | Download | |
|
10_foot_L_FDM(repaired).s tl |
23.76 MiB | 1 h 41 min 1 m | 33 x 49 x 21 | Download | |
|
11_glasses_FDM(repaired). stl |
12.63 MiB | 10 min <1 m | 29 x 25 x 5 | Download | |
|
12_bullets_(x6)_FDM(repai red).stl |
3.35 MiB | 8 min <1 m | 5 x 15 x 8 | Download | |
|
13_pouch_1_FDM(repaired). stl |
8.17 MiB | 13 min <1 m | 18 x 8 x 10 | Download | |
|
14_pouch_2_FDM(repaired). stl |
8.08 MiB | 14 min <1 m | 19 x 8 x 10 | Download | |
|
15_grenade_1_FDM(repaired ).stl |
14.07 MiB | 23 min <1 m | 20 x 13 x 17 | Download | |
|
16_grenade_2_FDM(repaired ).stl |
14.17 MiB | 21 min <1 m | 20 x 14 x 16 | Download | |
|
17_grenade_3_FDM(repaired ).stl |
14.04 MiB | 22 min <1 m | 20 x 12 x 16 | Download | |
|
18_platform_FDM(repaired) .stl |
49.62 MiB | 28 h 4 min 14 m | 159 x 156 x 25 | Download | |
|
19_ge_lock_10H(x3)_FDM(re paired).stl |
0.03 MiB | 4 min <1 m | 18 x 10 x 2 | Download | |
|
Keychain (repaired).stl |
0.35 MiB | 23 min <1 m | 30 x 30 x 2 | Download | |
|
Tag (repaired).stl |
1.70 MiB | 1 h 18 min 1 m | 150 x 18 x 5 | Download | |
| ... | |||||
Sending to ...
ABOUT THIS 3D MODEL
I'm not just a pretty face, I'm a pretty tough face too!
Bebop is a fictional character from the Teenage Mutant Ninja Turtles franchise. He first appeared in the original animated series in 1987 as a human thug named Anton Zeck, who was transformed into a mutant warthog by Shredder and Krang.
Bebop is known for his rough and tough personality, as well as his loyalty to Shredder. He often acts as the muscle for the Foot Clan, taking on the Turtles in battles and carrying out Shredder's orders with enthusiasm.
Despite his brutish nature, Bebop has a comedic side, often making silly jokes and puns. He also has a fondness for music and is an accomplished musician, playing the guitar and drums.
Throughout the various iterations of the TMNT franchise, Bebop has remained a fan-favorite character, beloved for his distinctive appearance, memorable personality, and dynamic role in the ongoing conflict between the Turtles and their enemies.
ADAPTATION FOR 3D PRINTING
Bebop for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 32 hours in total.
For you to receive the cleanest 3D printing result possible, and minimize the amount of filament needed for generated support, the figurine was divided into convenient assembly parts.
All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly video” and "Assembly Manual" before getting down to Bebop.
The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.
The model’s scale was calculated from the height of Bebop which is 1800 mm. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA version.
VERSIONS’ SPECIFICATIONS
FFF/FDM 1.0 version features:
- Contains 19 parts;
- A printed model is 255 mm tall, 194 mm wide, 162 mm deep;
- Bebop can be printed with or without the glasses;
- Bebop has two types of weapons for the right hand;
- Two ammunition options for the left hand;
- All parts are divided in such a way that you will print them with the smallest number of support structures.
DLP/SLA 1.0 version features:
- Contains 15 parts;
- A printed model is 120 mm tall, 75 wide, 73 mm deep;
- Bebop can be printed with or without the glasses;
- Bebop has two types of weapons for the right hand;
- Two ammunition options for the left hand;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.
DLP/SLA Eco 1.0 version features:
- Contains 15 parts;
- A printed model is 120 mm tall, 75 wide, 73 mm deep;
- Bebop can be printed with or without the glasses;
- Bebop has two types of weapons for the right hand;
- Two ammunition options for the left hand;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.
- Some parts are manually hollowed out to save resin.
SLS 1.0 version features:
- Contains 9 parts;
- 8 options for a diorama and 1 stand;
You can get the model of Bebop for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.
Watch the tutorial on how to assemble Bebop 3D Printing Model on Gambody YouTube channel.
Also, you may like the Cartoon 3D Printing Figurines, and Villians 3D Printing Figurines.
_______
FAQ:
Where can I print a model if I have no printer?
How to get started with 3D printing?
How to choose right 3D model print bed positioning?
How to paint printed figurine?
Generic
Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.
Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.
Note:
- You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
- All connectors should be printed at 100% Infill.
Cura printing recommendations:
These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.
To avoid printing problems, we recommend the following settings: download
Simplify3D printing recommendations:
These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.
To avoid printing problems, we recommend the following settings: download
Slic3r printing recommendations:
These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.
To avoid printing problems, we recommend the following settings: download
PrusaSlicer printing recommendations:
These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.
To avoid printing problems, we recommend the following settings: download
Reviews
Similar items
Inappropriate Content Form
You are about to report Bebop 3D Printing Figurine | Assemble for violating our Terms and Conditions. Please take a few moments to fill in the following information.
Comments
comments powered by Disqus