Premium Stock

Mammoth Tank Accessories 3D Print Files - Set 2 | Assembly Model

cm: 43 w x 15.1 d x 21.2 h
in: 16.929 w x 5.945 d x 8.346 h

Source Files




Printing Details

This 3D model consists of files in StereoLithography (.STL) format that have been optimized for 3D printing.

Download parts set 2_T2 and set 2_T3 for free to check the printability and test the quality before buying all STL files of the 3D model.

Download Free Samples

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
set 2_R1 (repaired) (repa ired).stl
0.06 MiB 3 h 38 min 3 m 77 x 49 x 33 Download
set 2_R2 (repaired) (repa ired).stl
1.08 MiB 34 h 4 min 22 m 144 x 199 x 83 Download
set 2_S1 (repaired) (repa ired).stl
1.01 MiB 26 h 33 min 23 m 141 x 82 x 45 Download
set 2_S2 (repaired) (repa ired).stl
0.71 MiB 27 h 2 min 24 m 136 x 82 x 45 Download
set 2_S3 (repaired) (repa ired).stl
0.61 MiB 15 h 25 min 13 m 80 x 82 x 45 Download
set 2_S4 (repaired) (repa ired).stl
1.00 MiB 26 h 28 min 23 m 141 x 82 x 45 Download
set 2_S5 (repaired) (repa ired).stl
0.71 MiB 27 h 2 min 24 m 136 x 82 x 45 Download
set 2_S6 (repaired) (repa ired).stl
0.62 MiB 15 h 22 min 13 m 80 x 82 x 45 Download
set 2_T1 (repaired) (repa ired).stl
0.19 MiB 2 h 6 min 1 m 33 x 34 x 19 Download
set 2_T2 (repaired) (repa ired).stl
2.31 MiB 8 h 40 min 5 m 91 x 49 x 37 Download
set 2_T3 (repaired) (repa ired).stl
14.71 MiB 45 h 27 min 30 m 185 x 109 x 73 Download
set 2_T4 (repaired) (repa ired).stl
0.07 MiB 1 h 57 min 1 m 24 x 41 x 25 Download
set 2_T5 (repaired) (repa ired).stl
0.22 MiB 2 h 44 min 2 m 22 x 52 x 40 Download

This is the second set of supplementary fixtures for your printed Mammoth Tank 3D model. Although similar to set 1 by composition that includes splashboards, a tower and a battering ram, set 2 differs significantly from its original model or set 1 tank 3D print model.

Firstly, it is about the tower, crowned with a powerful and massive coilgun that uses  electromagnetic effect to propel the missiles. 

Secondly, it is about the battering ram that is enhanced with terrifying and impressive horns, less in number, as compared to the battering ram from set 1, but with the same destructive power. 

Set 2 consists of 13 parts. It is 430mm wide, 200mm tall and 200mm deep. The 3D printable files of set 2 have undergone thorough testing to ensure they are error-free.   

Order Mammoth tank set 2 3D files for printing by clicking on the green “Buy” button in the top-right corner. Add your PayPal account or credit card details and you are ready to download and print this exclusive set of fixtures.

Note: Firstly, you need to download and print Mammoth tank printings. When you have your tank and the set of fixtures printed out, all it remains to do is to join them carefully together to enjoy an outstanding Mammoth tank 3D model.


This model was tested in Cura 15.06. To avoid printing problems, we recommend:


  • Layer height 0.1mm
  • Initial layer thickness 0.3mm
  • Bottom/top pattern: lines
  • Horizontal expansion: 0.04mm (when entering 0.04 index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

Speed setups:

  • Infill speed: 50mm/s
  • Outer shell speed: 30mm/s
  • Inner shell speed: 20mm/s
  • Top/Bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4


  • Infill Pattern: Grid
  • Line distance: 3mm
  • Infill Overlap: 20%
  • Infill Layers: 0


  • Enable support: check
  • Placement: Everywhere
  • Overhang angle - 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: lines
  • Line distance: 1.5mm

Platform Adhesion:

  • Type: Brim
  • Brim Line Count: 7 (up to 20, depending on the model’s height)

Model has been tested in PLA.


All parts will be printed on the built plate in such a way as to save PLA material, to keep to print pattern and to cut printing time, while avoiding quality loss. All basic settings by default.


comments powered by Disqus

Similar items

Browse more newly listed 3D printings