DeLorean 3D Printing Model | Assembly Kit 3: Car Interior, Wheels and Platforms

cm: 23.4 w x 52.7 d x 15.4 h
in: 9.213 w x 20.748 d x 6.063 h

Source Files




Printing Details

This 3D printing assembly kit consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

DeLorean 3D Printing Model | Assembly Kit 3: Car Interior, Wheels and Platforms comes in 1 version for FFF/FDM 3D printers. Files are available for download immediately after the purchase.

Detailed information about this 3D printing assembly kit is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_clamp_1 (repaired).stl
0.02 MiB 2 min <1 m 7 x 7 x 2 Download
2_clamp_2 (repaired).stl
0.02 MiB 2 min <1 m 8 x 8 x 2 Download
3_clamp_3 (repaired).stl
0.02 MiB 3 min <1 m 9 x 9 x 2 Download
4_pipe (repaired).stl
0.39 MiB 23 min <1 m 3 x 190 x 3 Download
ci_1_gear_a (repaired).st l
1.40 MiB 24 min <1 m 16 x 31 x 27 Download
ci_2_gaiter (repaired).st l
2.41 MiB 33 min <1 m 16 x 30 x 17 Download
ci_3_gear_b (repaired).st l
0.13 MiB 2 min <1 m 4 x 4 x 4 Download
ci_4_dashboard_11 (repair ed).stl
1.17 MiB 2 h 13 min 1 m 21 x 67 x 24 Download
ci_5_dashboard_13 (repair ed).stl
0.93 MiB 1 h 12 min 1 m 18 x 61 x 9 Download
ci_6_dashboard_14 (repair ed).stl
0.10 MiB 7 min <1 m 7 x 10 x 7 Download
ci_7_dashboard_18 (repair ed).stl
0.32 MiB 7 min <1 m 10 x 12 x 6 Download
ci_8_dashboard_17 (repair ed).stl
0.39 MiB 25 min <1 m 27 x 26 x 11 Download
ci_9_dashboard_16 (repair ed).stl
0.07 MiB 15 min <1 m 24 x 7 x 8 Download
ci_10_dashboard_15 (repai red).stl
1.12 MiB 24 min <1 m 9 x 36 x 12 Download
ci_11_dashboard_5 (repair ed).stl
1.59 MiB 15 min <1 m 20 x 17 x 5 Download
ci_12_dashboard_12 (repai red).stl
0.17 MiB 11 min <1 m 13 x 16 x 10 Download
ci_13_chair_R (repaired). stl
8.63 MiB 9 h 47 min 6 m 60 x 86 x 85 Download
ci_14_safety_belt_R (repa ired).stl
0.69 MiB 1 h 19 min 1 m 17 x 74 x 70 Download
ci_15_dashboard_19b (repa ired).stl
0.52 MiB 20 min <1 m 21 x 24 x 10 Download
ci_16_dashboard_19a (repa ired).stl
4.69 MiB 2 h 34 min 1 m Download
ci_17_dashboard_20 (repai red).stl
2.35 MiB 36 min <1 m 25 x 23 x 15 Download
ci_18_dashboard_21 (repai red).stl
0.15 MiB 23 min <1 m 14 x 14 x 12 Download
ci_19_dashboard_22 (repai red).stl
0.61 MiB 44 min <1 m Download
ci_20_steering_wheel_base (repaired).stl
1.20 MiB 42 min <1 m Download
ci_21_steering_wheel_stic k_2 (repaired).stl
0.01 MiB 1 min <1 m 5 x 15 x 1 Download
ci_22_steering_wheel_stic k_1 (repaired).stl
0.01 MiB 1 min <1 m 5 x 15 x 1 Download
ci_23_steering_wheel (rep aired).stl
1.37 MiB 47 min 1 m Download
ci_24_speed_panel (repair ed).stl
0.16 MiB 17 min <1 m 48 x 12 x 3 Download
ci_25_carpet (repaired).s tl
1.15 MiB 33 min <1 m Download
ci_26_pedal_c (repaired). stl
0.25 MiB 23 min <1 m Download
ci_27_pedal_b (repaired). stl
0.25 MiB 26 min <1 m Download
ci_28_pedal_a (repaired). stl
0.25 MiB 26 min <1 m Download
ci_29_chair_L (repaired). stl
8.63 MiB 9 h 44 min 6 m Download
ci_30_safety_belt_L (repa ired).stl
0.69 MiB 1 h 17 min 1 m 17 x 74 x 70 Download
ci_31_hand_brake (repaire d).stl
0.20 MiB 20 min <1 m 8 x 32 x 17 Download
ci_32_dashboard_6 (repair ed).stl
0.56 MiB 1 h 39 min 1 m 34 x 32 x 19 Download
ci_33_dashboard_7 (repair ed).stl
0.16 MiB 21 min <1 m 20 x 19 x 10 Download
ci_34_dashboard_8 (repair ed).stl
0.09 MiB 8 min <1 m 7 x 9 x 9 Download
ci_35_dashboard_9 (repair ed).stl
0.23 MiB 58 min 1 m 45 x 17 x 17 Download
ci_36_dashboard_10 (repai red).stl
0.04 MiB 14 min <1 m 26 x 11 x 8 Download
ci_37_dashboard_1 (repair ed).stl
0.14 MiB 15 min <1 m 19 x 7 x 12 Download
ci_38_dashboard_2 (repair ed).stl
0.14 MiB 15 min <1 m 19 x 7 x 12 Download
ci_39_dashboard_4 (repair ed).stl
0.05 MiB n.a.
14 x 8 x 8 Download
ci_40_dashboard_3 (repair ed).stl
0.38 MiB 7 min <1 m Download
ci_41_rearview_mirror (re paired).stl
1.27 MiB 14 min <1 m Download
pl_1_platform_p2_l1 (repa ired).stl
0.12 MiB 6 h 34 min 4 m Download
pl_2_platform_p2_l4 (repa ired).stl
0.12 MiB 6 h 34 min 4 m Download
pl_3_platform_p2_l2 (repa ired).stl
0.11 MiB 2 h 32 min 1 m Download
pl_4_platform_p2_l5 (repa ired).stl
0.11 MiB 2 h 32 min 1 m Download
pl_5_platform_p2_l3 (repa ired).stl
1.88 MiB 15 h 38 min 14 m Download
pl_6_platform_p2_l6 (repa ired).stl
1.88 MiB 15 h 37 min 14 m 167 x 25 x 156 Download
pl_7_platform_p2_a1 (repa ired).stl
1.60 MiB 24 h 37 min 14 m 187 x 182 x 31 Download
pl_8_platform_p2_a2 (repa ired).stl
1.55 MiB 22 h 15 min 13 m 138 x 176 x 58 Download
pl_9_platform_p2_a4 (repa ired).stl
4.47 MiB 15 h 14 min 9 m Download
pl_10_platform_p2_a8 (rep aired).stl
1.31 MiB 13 h 29 min 8 m 107 x 178 x 42 Download
pl_11_platform_p2_a5 (rep aired).stl
3.53 MiB 19 h 43 min 11 m 117 x 156 x 49 Download
pl_12_platform_p2_a7 (rep aired).stl
2.25 MiB 12 h 37 min 7 m 116 x 103 x 49 Download
pl_13_platform_p2_a6 (rep aired).stl
2.02 MiB 13 h 19 min 8 m 109 x 114 x 40 Download
pl_14_platform_p2_a3 (rep aired).stl
0.05 MiB 7 h 25 min 4 m 57 x 135 x 14 Download
pl_15_platform_p3_l1 (rep aired).stl
4.90 MiB 41 h 49 min 23 m 164 x 151 x 52 Download
pl_16_platform_p3_l3 (rep aired).stl
5.28 MiB 61 h 17 min 35 m 171 x 179 x 52 Download
pl_17_platform_p3_l2 (rep aired).stl
4.60 MiB 41 h 54 min 23 m 173 x 152 x 52 Download
pl_18_platform_p3_l4 (rep aired).stl
5.58 MiB 61 h 51 min 35 m 174 x 179 x 52 Download
pl_19_platform_p3_l5 (rep aired).stl
4.51 MiB 48 h 31 min 27 m 165 x 141 x 52 Download
pl_20_platform_p3_l6 (rep aired).stl
4.86 MiB 49 h 53 min 28 m 168 x 141 x 52 Download
pl_21_platform_p3_l7 (rep aired).stl
5.76 MiB 61 h 41 min 35 m 171 x 183 x 52 Download
pl_22_platform_p3_l8 (rep aired).stl
5.93 MiB 65 h 11 min 37 m 174 x 183 x 52 Download
pl_23_platform_p3_l9 (rep aired).stl
5.69 MiB 54 h 20 min 30 m 171 x 181 x 52 Download
pl_24_platform_p3_l10 (re paired).stl
5.67 MiB 55 h 6 min 31 m 167 x 180 x 52 Download
wh_1_wheel_front_L_part_3 b (repaired).stl
1.92 MiB 5 h 33 min 4 m 63 x 63 x 25 Download
wh_2_wheel_back_L_part_3b (repaired).stl
1.94 MiB 7 h 5 min 5 m 70 x 70 x 28 Download
wh_3_wheel_front_R_part_3 b (repaired).stl
1.92 MiB 5 h 33 min 4 m 63 x 63 x 25 Download
wh_4_wheel_back_R_part_3b (repaired).stl
1.94 MiB 7 h 6 min 5 m 70 x 70 x 28 Download
wh_5_wheel_front_L_part_3 a (repaired).stl
1.38 MiB 4 h 43 min 3 m 53 x 53 x 29 Download
wh_6_tire_front_L_part_3a _flex (repaired).stl
13.19 MiB 7 h 19 min 5 m 77 x 77 x 30 Download
wh_7_tire_front_L_part_3a _plastic (repaired).stl
10.54 MiB 5 h 41 min 3 m Download
wh_8_wheel_back_L_part_3a (repaired).stl
1.38 MiB 6 h 24 min 5 m 58 x 58 x 32 Download
wh_9_tire_back_L_part_3a_ flex (repaired).stl
13.20 MiB 9 h 29 min 7 m 85 x 85 x 33 Download
wh_10_tire_back_L_part_3a _plastic (repaired).stl
10.56 MiB 7 h 24 min 4 m 85 x 85 x 33 Download
wh_11_wheel_front_R_part_ 3a (repaired).stl
1.38 MiB 4 h 46 min 3 m 53 x 53 x 29 Download
wh_12_tire_front_R_part_3 a_flex (repaired).stl
13.19 MiB 7 h 19 min 5 m 77 x 77 x 30 Download
wh_13_tire_front_R_part_3 a_plastic (repaired).stl
10.54 MiB 5 h 42 min 3 m 77 x 77 x 30 Download
wh_14_wheel_back_R_part_3 a (repaired).stl
1.38 MiB 6 h 23 min 5 m 58 x 58 x 32 Download
wh_15_tire_back_R_part_3a _flex (repaired).stl
13.20 MiB 9 h 26 min 7 m 85 x 85 x 33 Download
wh_16_tire_back_R_part_3a _plastic (repaired).stl
10.56 MiB 7 h 26 min 4 m Download
wh_17_suspension_front_L_ part_2 (repaired).stl
0.26 MiB 3 h 26 min 2 m 82 x 46 x 44 Download
wh_18_suspension_back_L_p art_2 (repaired).stl
0.23 MiB 5 h 17 min 3 m 92 x 51 x 59 Download
wh_19_suspension_front_R_ part_2 (repaired).stl
0.26 MiB 3 h 27 min 2 m 82 x 46 x 44 Download
wh_20_suspension_back_R_p art_2 (repaired).stl
0.23 MiB 5 h 14 min 3 m 92 x 51 x 59 Download
Ge_lock_10H_x44(repaired) .stl
0.03 MiB 10 min <1 m 10 x 2 x 18 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min 1 m 150 x 18 x 5 Download


Having decided to go 30 years into the future (“a nice round number”), Doc blasted off in his trusty DeLorean into 2015 where he encountered the wonders of now widespread hover conversion. Suffice it to say, the adventurous duo Marty McFly and Doc Emmet Brown no longer need roads to get up to 88 miles per hour - the DeLorean is now flying! It is a pity that 2015 didn’t actually bring us any hoverboards as envisioned in the Back to the Future movie but your 3D printed DeLorean time machine can already boast an alternative suspension and a pair of hoverwheels. What is more, you can mount your taking off DMC-12 on the platform that has fire trails on it and depict the car reaching the top of tall street lamps! One more Back to the Future scene that eventually became fan’s favourite is the DeLorean’s rushing along the railroad tracks to be eventually destroyed by a locomotive. The awesome alternative platform in the form of a railway tracks fragment that this kit comprises will help you depict this scene as well! Finally, you might be worried that the wheels are not enough to make the ordinary DMC-12 time-travel? The flux capacitor and time circuits box placed inside the 3D printing car’s highly-detailed interior have got your covered! We are sure “in 1985 plutonium was in every corner drug store”, but now, its a little hard to come by and there must be the only thing preventing your stunning 3D printed DeLorean to travel back to the future!


The process of adaptation of the DeLorean’s Kit 3 was focused on the model’s intricate interior and additional elements that would aid Back to the Future fans in recreating the movies’ iconic scenes. First of all, the vehicle’s rich interior was carefully prepared to make sure you will receive the cleanest result possible after printing. That is why all interior elements like seats, gear stick, levers, flux capacitor, rearview mirror, pedals, stereo and many more were carefully extracted and are to be printed and assembled separately. Decorative interior wiring does not come in STL files - you can use 1.75mm PLA plastic (or rope lights) and fasten it with clamps that come in STL files in 3 different diameters for you to choose from. There were also prepared alternative moon hubcaps, hoverwheels and rail wheels for you to recreate different movie scenes and two different platforms for your 3D printed model’s impressive display. All assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. The model's assembly requires additional "pins" to secure the parts of the 3D printed car. These pins do not come in STL files but can be made out of short pieces of regular 2.85 PLA, screws or wire of an appropriate diameter. We highly recommend that you watch "Assembly video" in the photo preview section before assembling the DeLorean time machine. When downloading any file that comprises the kit you will also receive "Assembly Manual" in PDF format.

This is the description of the model's Assembly Kit 3: Car Interior, Wheels and Platforms. Standard Assembly Kit 1 and additional Kit 2 can be ordered as separate items as well.

SPECIFICATION OF THE ASSEMBLY KIT 3: Car Interior, Wheels and Platforms

- The 3D printing model's chosen scale is 1:8 and it was calculated from the actual length of the DMC DeLorean car that is 4216 mm;
- Contains 90 parts that comprise the car interior, alternative wheels, platforms etc. elements of the 3D printing time machine;
- A printed 1:8 DeLorean is 154 mm tall, 234 mm wide, 527 mm deep;
- Assembly kit includes lock Ge_lock_10H x 18 to attach the model's parts securely without glue that needs to be printed 18 times

CI - Car Interior:
- Flux capacitor which makes time travel possible is placed inside its case and is to be attached behind the seats with pipes;
- Dashboardcentre console, gear stick and shroud, rearview mirror etc. are extremely detailed to achieve a realistic look; 
- The steering wheel is rotating and has two levers (indicator+horn and wipers);
- The Time Circuits Box with a handle is placed in the centre console as well as button panel and power supply box;
- Both driver and passenger seats are equipped with seat beltsseat adjustment knobs and "DMC" logo on the head-rest;
- Clutch, gas and brake pedals come together with a separated driver's floor mat;
- The iconic Time Circuits Display, as well as stereo, compass and keypad, can be decorated with decals;
- Decorative interior wiring does not come in STL files - 1.75mm PLA plastic or rope lights can be used instead;

WH - Wheels:
- Alternative suspension allows to set up the hoverwheels of the flying DeLorean;
- Moon hubcaps and alternative tyres to achieve the retro look of the time machine;
Two variants of retro wheel tyre to choose from: one is meant for plastic filament, the other is hollow for flexible material;
Rail wheels to equip the car and re-create the railroad scene;

PL - Platforms:
- A stand (1) to depict the time machine taking off;
- This stand is made to resemble the "Back to the Future" logo and has fire trails left behind by the DeLorean;
- The stand comes with a pair of tall street lamps;
- A "street lamps" platform is 473 mm tall, 461 mm wide, 520 mm deep;
- Second platform (2) is made in the form of a railway tracks fragment to depict the iconic movie scene;
- Railway tracks platform is 52 mm tall, 345 mm wide, 836 mm deep.


Kit 1: Standard Assembly Kit

Kit 2: Engines, Mr Fusion, Active Suspension


- STL files of DeLorean Model Assembly Kit 3 for 3D Printing which consist of 90 parts;
- Assembly Kit 3 that consists of car interior, alternative wheels, platforms;
- High-poly detailed model of DeLorean in Kit 3;
- Assembly Manual in PDF format;
- Detailed settings that we provide as a recommendation for Cura , Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get DeLorean Model Assembly Kit 3 for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble DeLorean 3D Printing Model | Assembly Kit 3: Car Interior, Wheels and Platforms at Gambody YouTube channel.

Also, you may like Marty McFly and Doc Brown 3D Printing Figurines.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at


You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
  Detect thin walls: Check
  Detect bridging perimeters: Check
  Seam position: Random
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
  Infill/Perimeters overlap: 20%
  Bridge flow ratio: 0.95
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm


comments powered by Disqus

Similar items

Browse more newly listed 3D printings