Make pre-order

DeLorean 3D Printing Model | Standard Assembly Kit 1

average
cm: 23.4 w x 52.7 d x 15.4 h
in: 9.213 w x 20.748 d x 6.063 h

Source Files

|

Description

|

Printing Details

This 3D printing assembly kit consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

DeLorean 3D Printing Model | Standard Assembly Kit 1 comes in 1 version for FFF/FDM 3D printers. Files are available for download immediately after the purchase.

Detailed information about this 3D printing assembly kit is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
bl_1_bumper_b (repaired). stl
25.77 MiB 8 h 52 min
5 m
197 x 42 x 20 Download
bl_2_bumper_b_grid (repai red).stl
1.99 MiB 18 min
<1 m
126 x 11 x 1 Download
bl_3_headlight_front_glas s_b_1 (repaired).stl
0.38 MiB 3 min
<1 m
19 x 8 x 1 Download
bl_4_headlight_front_b_R (repaired).stl
0.57 MiB 17 min
<1 m
23 x 11 x 9 Download
bl_5_headlight_front_glas s_a_1 (repaired).stl
0.38 MiB 4 min
<1 m
18 x 10 x 1 Download
bl_6_headlight_front_glas s_a_2 (repaired).stl
0.38 MiB 3 min
<1 m
18 x 10 x 1 Download
bl_7_headlight_front_a_R (repaired).stl
1.34 MiB 51 min
<1 m
40 x 15 x 14 Download
bl_8_headlight_front_glas s_b_2 (repaired).stl
0.38 MiB 3 min
<1 m
19 x 8 x 1 Download
bl_9_headlight_front_b_L (repaired).stl
0.57 MiB 17 min
<1 m
23 x 11 x 9 Download
bl_10_headlight_front_gla ss_a_3 (repaired).stl
0.38 MiB 3 min
<1 m
18 x 10 x 1 Download
bl_11_headlight_front_gla ss_a_4 (repaired).stl
0.38 MiB 4 min
<1 m
18 x 10 x 1 Download
bl_12_headlight_front_a_L (repaired).stl
1.34 MiB 51 min
<1 m
40 x 15 x 14 Download
bl_13_bumper_a (repaired) .stl
12.08 MiB 14 h 41 min
9 m
195 x 44 x 31 Download
bl_14_headlight_back_Cent er (repaired).stl
2.29 MiB 1 h 2 min
1 m
57 x 23 x 10 Download
bl_15_headlight_back_R (r epaired).stl
1.28 MiB 1 h 1 min
1 m
56 x 23 x 10 Download
bl_16_headlight_back_L (r epaired).stl
1.28 MiB 1 h 1 min
1 m
56 x 23 x 10 Download
bl_17_headlight_back_plat e (repaired).stl
1.28 MiB 23 min
<1 m
28 x 17 x 6 Download
bl_18_bumper_c (repaired) .stl
6.60 MiB 15 h 7 min
9 m
Download
bl_19_bumper_d (repaired) .stl
6.00 MiB 6 h 4 min
3 m
Download
bl_20_headlight_side_back _R (repaired).stl
0.07 MiB 7 min
<1 m
Download
bl_21_headlight_side_back _L (repaired).stl
0.07 MiB 7 min
<1 m
Download
bl_22_headlight_side_fron t_L (repaired).stl
0.04 MiB 6 min
<1 m
Download
bl_23_headlight_side_fron t_R (repaired).stl
0.04 MiB 6 min
<1 m
Download
cb_1_doorstep_L (repaired ).stl
5.80 MiB 2 h 37 min
2 m
Download
cb_2_doorstep_R (repaired ).stl
5.80 MiB n.a.
n.a.
15 x 210 x 17 Download
cb_3_under_hood (repaired ).stl
23.01 MiB 25 h 28 min
17 m
Download
cb_4_wiper_1 (repaired).s tl
0.33 MiB 21 min
<1 m
84 x 11 x 9 Download
cb_5_wiper_2 (repaired).s tl
0.33 MiB 21 min
<1 m
83 x 18 x 9 Download
cb_6_hood (repaired).stl
14.99 MiB 17 h 42 min
11 m
Download
cb_7_cockpit_frame (repai red).stl
43.57 MiB 125 h 1 min
98 m
Download
cb_8_window_front (repair ed).stl
2.08 MiB 3 h 35 min
3 m
176 x 39 x 83 Download
cb_9_panel_a_L (repaired) .stl
16.61 MiB 8 h 9 min
5 m
25 x 60 x 168 Download
cb_10_panel_a_R (repaired ).stl
16.62 MiB 8 h 4 min
5 m
25 x 60 x 168 Download
cb_11_panel_b_R (repaired ).stl
19.12 MiB 14 h 42 min
9 m
49 x 102 x 189 Download
cb_12_panel_b_L (repaired ).stl
19.11 MiB 14 h 42 min
9 m
49 x 102 x 189 Download
cb_13_window_R (repaired) .stl
1.13 MiB 2 h 29 min
1 m
26 x 35 x 131 Download
cb_14_door_R (repaired).s tl
13.25 MiB 14 h 31 min
8 m
87 x 102 x 167 Download
cb_15_mirror_R (repaired) .stl
1.76 MiB 36 min
<1 m
23 x 23 x 27 Download
cb_16_door_R_connector_1 (repaired).stl
0.08 MiB 18 min
<1 m
22 x 11 x 16 Download
cb_17_door_R_connector_2 (repaired).stl
0.08 MiB 18 min
<1 m
22 x 11 x 16 Download
cb_18_window_L (repaired) .stl
1.13 MiB 2 h 27 min
1 m
26 x 35 x 131 Download
cb_19_door_L (repaired).s tl
13.25 MiB 14 h 31 min
8 m
87 x 102 x 167 Download
cb_20_mirror_L (repaired) .stl
1.76 MiB 36 min
<1 m
23 x 23 x 27 Download
cb_21_door_L_connector_1 (repaired).stl
0.08 MiB 18 min
<1 m
22 x 11 x 16 Download
cb_22_door_L_connector_2 (repaired).stl
0.08 MiB 18 min
<1 m
22 x 11 x 16 Download
nr_1_time_engine_base (re paired).stl
16.99 MiB 28 h 55 min
15 m
184 x 139 x 38 Download
nr_2_time_engine_top_part _1 (repaired).stl
4.40 MiB 6 h 21 min
4 m
52 x 77 x 34 Download
nr_3_time_engine_exhaust_ R (repaired).stl
0.21 MiB 11 h 27 min
7 m
42 x 54 x 102 Download
nr_4_time_engine_exhaust_ L (repaired).stl
0.21 MiB 11 h 28 min
7 m
42 x 54 x 102 Download
sw_1_susp_front_static_L (repaired).stl
0.57 MiB 2 h 50 min
1 m
45 x 44 x 25 Download
sw_2_bearing_static_front _L (repaired).stl
0.08 MiB 1 h 3 min
1 m
46 x 46 x 9 Download
sw_3_wheel_front_L_part_1 _2 (repaired).stl
3.90 MiB 5 h 22 min
4 m
53 x 53 x 27 Download
sw_4_tire_front_L_part_1_ 2_flex (repaired).stl
21.04 MiB 8 h 39 min
6 m
77 x 77 x 30 Download
sw_5_tire_front_L_part_1_ 2_plastic (repaired).stl
18.46 MiB 6 h 55 min
4 m
77 x 77 x 30 Download
sw_6_susp_front_static_R (repaired).stl
0.57 MiB 2 h 53 min
1 m
45 x 44 x 25 Download
sw_7_bearing_static_front _R (repaired).stl
0.08 MiB 1 h 29 min
1 m
46 x 46 x 9 Download
sw_8_wheel_front_R_part_1 _2 (repaired).stl
3.90 MiB 5 h 22 min
4 m
53 x 53 x 27 Download
sw_9_tire_front_R_part_1_ 2_flex (repaired).stl
21.03 MiB 8 h 22 min
5 m
77 x 77 x 30 Download
sw_10_tire_front_R_part_1 _2_plastic (repaired).stl
18.45 MiB 6 h 56 min
4 m
77 x 77 x 30 Download
sw_11_susp_beam_front_cen ter_R (repaired).stl
0.02 MiB 1 h 19 min
<1 m
53 x 22 x 82 Download
sw_12_susp_back_static_R (repaired).stl
0.60 MiB 3 h 6 min
1 m
34 x 48 x 49 Download
sw_13_susp_beam_engine_bo t_R (repaired).stl
0.25 MiB 18 min
<1 m
54 x 30 x 7 Download
sw_14_bearing_connector_b ack_R (repaired).stl
0.00 MiB 14 min
<1 m
8 x 9 x 17 Download
sw_15_bearing_static_back _R (repaired).stl
0.05 MiB 1 h 47 min
1 m
51 x 51 x 10 Download
sw_16_wheel_back_R_part_1 _2 (repaired).stl
3.91 MiB 7 h 20 min
5 m
58 x 58 x 30 Download
sw_17_tire_back_R_part_1_ 2_flex (repaired).stl
21.07 MiB 11 h 15 min
7 m
86 x 86 x 33 Download
sw_18_tire_back_R_part_1_ 2_plastic (repaired).stl
18.49 MiB 9 h 21 min
5 m
86 x 86 x 33 Download
sw_19_susp_beam_front_cen ter_L (repaired).stl
0.02 MiB 1 h 19 min
<1 m
53 x 22 x 82 Download
sw_20_susp_back_static_L (repaired).stl
0.60 MiB 3 h 7 min
1 m
34 x 48 x 49 Download
sw_21_susp_beam_engine_bo t_L (repaired).stl
0.25 MiB 18 min
<1 m
54 x 30 x 7 Download
sw_22_bearing_connector_b ack_L (repaired).stl
0.00 MiB 14 min
<1 m
8 x 9 x 17 Download
sw_23_bearing_static_back _L (repaired).stl
0.05 MiB 1 h 47 min
1 m
51 x 51 x 10 Download
sw_24_wheel_back_L_part_1 _2 (repaired).stl
3.90 MiB 7 h 20 min
5 m
58 x 58 x 30 Download
sw_25_tire_back_L_part_1_ 2_flex (repaired).stl
21.05 MiB 10 h 51 min
7 m
86 x 86 x 33 Download
sw_26_tire_back_L_part_1_ 2_plastic (repaired).stl
18.48 MiB 9 h 9 min
5 m
86 x 86 x 33 Download
sw_27_frame_front (repair ed).stl
0.76 MiB 18 h 28 min
11 m
145 x 229 x 42 Download
sw_28_frame_back (repaire d).stl
0.79 MiB 33 h 1 min
23 m
142 x 233 x 59 Download
sw_29_bot_plate_tank (rep aired).stl
0.02 MiB 2 h 41 min
2 m
75 x 190 x 3 Download
sw_30_bot_plate_back_a_L (repaired).stl
0.02 MiB 1 h 29 min
1 m
41 x 18 x 78 Download
sw_31_bot_plate_back_a_R (repaired).stl
0.02 MiB 1 h 30 min
1 m
41 x 18 x 78 Download
sw_32_bot_plate_front (re paired).stl
0.49 MiB 15 h 50 min
10 m
108 x 136 x 36 Download
sw_33_bot_plate_front_a_L (repaired).stl
6.12 MiB 14 h 39 min
13 m
47 x 51 x 136 Download
sw_34_bot_plate_front_a_R (repaired).stl
6.17 MiB 14 h 47 min
13 m
47 x 51 x 136 Download
sw_35_bot_plate_center_L (repaired).stl
0.49 MiB 11 h 3 min
6 m
90 x 181 x 23 Download
sw_36_bot_plate_center_R (repaired).stl
0.49 MiB 11 h 4 min
6 m
90 x 181 x 23 Download
sw_37_bot_plate_back_b_L (repaired).stl
8.23 MiB 20 h 23 min
18 m
65 x 57 x 150 Download
sw_38_bot_plate_back_b_R (repaired).stl
8.23 MiB 20 h 25 min
18 m
65 x 57 x 150 Download
Ge_lock_10H x 36 (repaire d).stl
0.03 MiB 10 min
<1 m
10 x 2 x 18 Download
nr_1.1_base (repaired).st l
11.98 MiB 24 h 22 min
13 m
184 x 139 x 38 Download
nr_1.2_pipe_a (repaired). stl
0.52 MiB 2 h 31 min
1 m
19 x 21 x 94 Download
nr_1.3_pipe_b (repaired). stl
2.16 MiB 27 min
<1 m
46 x 7 x 14 Download
nr_1.4_pipe_c_L (repaired ).stl
0.76 MiB 55 min
1 m
29 x 15 x 29 Download
nr_1.5_pipe_c_R (repaired ).stl
0.76 MiB 55 min
1 m
29 x 15 x 29 Download
nr_1.6_pipe_d_L (repaired ).stl
0.42 MiB 23 min
<1 m
16 x 49 x 15 Download
nr_1.7_pipe_d_R (repaired ).stl
0.42 MiB 24 min
<1 m
16 x 49 x 15 Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
Download
Tag (repaired).stl
1.70 MiB 1 h 16 min
1 m
Download
sw_28_1_frame_back_v2 (re paired).stl
0.77 MiB 25 h 39 min
17 m
142 x 183 x 59 Download
sw_28_2_frame_back_v2 (re paired).stl
0.14 MiB 4 h 2 min
2 m
121 x 19 x 69 Download

ABOUT THIS 3D MODEL

The DeLorean Time Machine is a device invented by Dr Emmett Brown who used it together with Marty McFly and dog Einstein to travel through time within the iconic Back to the Future trilogy. Built from a 1982 DeLorean DMC-12 and fitted with a flux capacitor powered by plutonium, the vehicle surprised even its inventor having accelerated through the time with its tyres spinning and smoking. And now, by the efforts of one of our contributing 3D artists, you get an opportunity to build your very own DeLorean time machine by means of a 3D printer! The author of the model spent 290 hours working on the DeLorean for 3D printing and made sure to equip the DMC-12 with everything needed not only for time travel but also for an exciting and elaborate 3D printing vehicle project. During the first test Doc said, “If you're gonna build a time machine into a car, why not do it with some style?”. We completely agree with the creative scientist and encourage you to cast all hesitations aside and take up the DeLorean for 3D printing in order to recreate your favourite appearance of the time machine with the help of three kits available. Just make sure you reach exactly 88 miles per hour already during the first try! 

ADAPTATION FOR 3D PRINTING

DeLorean 3D printing model is a highly-detailed assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 128 hours in total. In the course of the model’s preparation, Gambody team came up with 3 full kits of various assembly elements that will allow you to build a DeLorean time machine from either of the Back to the Future trilogy’s instalments and place your finished stylish DMC into one of the franchise’s iconic settings. In order to preserve the accurate likeness of an actual DMC-12 car, as well as Doc’s modified time machine, the model was divided into many parts that are to be assembled as if a real vehicle. Various special mechanisms were introduced into the model to make sure that the car’s opening parts like doors, windscreen wipers, hood, steering wheel etc. are movable. Taking into account the willingness of our customers to make their 3D printed DeLorean as impressive as possible, there were ensured tunnels for LEDs introduction and many elements like headlights, taillights sections, parking lights etc. are extracted and provided separately to be printed in a transparent filament. In order to give all BttF enthusiasts an opportunity to make the iconic vehicle true to life, all model’s sets of wheels, as well as the spare wheel stored in the luggage compartment, come with two variants of the tyre to choose from: one is meant for plastic filament, the other is hollow to be printed with flexible material. Decorative interior and exterior wiring do not come in STL files - 1.75mm PLA plastic or rope lights of your chosen colour can be used instead. All assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. The model's assembly requires additional "pins" to secure the parts of the 3D printed car. These pins do not come in STL files but can be made out of short pieces of regular 2.85 PLA, screws or wire of an appropriate diameter. We highly recommend that you watch "Assembly video" in the photo preview section before assembling the DeLorean time machine. When downloading any file that comprises the kit you will also receive "Assembly Manual" in PDF format.

This is the description of the model's Standard Assembly Kit 1. Additional Kit 2 and Kit 3 can be ordered as separate items as well.

SPECIFICATION OF THE STANDARD KIT 1

- The 3D printing model's chosen scale is 1:8 and it was calculated from the actual length of the DMC DeLorean car that is 4216 mm;
- Contains 88 parts that comprise the basic configuration of the 3D printing time machine;
- A printed 1:8 DeLorean is 154 mm tall, 234 mm wide, 527 mm deep;
- Assembly kit includes lock Ge_lock_10H x 36 to attach the model's parts securely without glue that needs to be printed 36 times;

CB - Car Body:
- DeLorean’s distinctive opening gullwing doors;
- Windscreen and windows are provided separately to be printed with the transparent filament;
- Opening hood to access the luggage compartment;
- Articulated windscreen wipers;
- Car interior frame - floorplan forming the base for the potential passenger compartment that comes in Kit 3;

SW - Suspension and wheels:
- Frame, upper frame and static suspension are an accurate likeness to Doc’s modified DMC-12;
- Rim is to be inserted into the tyre and attached to the suspension with a pin and a gasket;
Two variants of tyres: one is meant for plastic filament, the other is hollow for flexible material;

BL - Bumpers and Lights:
- The front bumper has a "DMC" logo placed on a front grille;
- The lower bumper grille is easily printed as a one-piece assembly part;
- Headlights are extracted and provided separately to introduce LEDs into each section;
- Headlight lenses also come separately to be printed in transparent filament to enhance the LED illumination;
- The upper rear section has a separated numberplate;
- Taillights are divided into several sections to print them with corresponding colours of transparent filament
- The construction of the upper rear section also presupposes the introduction of LEDs;
- Parking lights are extracted to print them with coloured filament; 

NR - Nuclear Reactor:
- Kit 1 features the nuclear fission reactor that was Doc's first modification of the car; 
- Has large steam vents, fuel elements, control rods etc.;
- Blue tubes do not come in STL files - 1.75mm PLA plastic can be used instead.

ADDITIONAL DELOREAN 3D MODEL KITS: 

Kit 2: Engines, Mr Fusion, Active Suspension

Kit 3: Car Interior, Wheels and Platforms

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of DeLorean Model Standard Assembly Kit 1 for 3D Printing which consist of 88 parts;
- Standard Assembly Kit that consists of basic time machine parts;
- High-poly detailed model of DeLorean in Standard Kit;
- Assembly Manual in PDF format;
- Detailed settings that we provide as a recommendation for Cura , Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get DeLorean Model Standard Assembly Kit 1 for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble DeLorean 3D Printing Model | Standard Assembly Kit 1 at Gambody YouTube channel.

Also, you may like Marty McFly and Doc Brown 3D Printing Figurines.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

Note:
- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Quality
Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill 
Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Material 
Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at support@gambody.com)

Speed 

You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Travel 
Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings