Premium Stock

DOOM 3D Printable Masks

cm: 38.4 w x 38.2 d x 59.7 h
in: 15.118 w x 15.039 d x 23.504 h

Source Files




Printing Details

These 3D models consist of files in StereoLithography (.Stl) format that has been optimized for 3D printing.

Prior to starting printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1 (repaired).stl
21.02 MiB 86 h 1 min 59 m 186 x 134 x 190 Download
10 (repaired).stl
1.94 MiB 13 h 40 min 8 m 71 x 87 x 130 Download
2 (repaired).stl
16.48 MiB 4 h 52 min 3 m 62 x 93 x 20 Download
3 (repaired).stl
7.38 MiB 62 h 5 min 50 m 165 x 219 x 132 Download
3_1 (repaired).stl
20.43 MiB 22 h 55 min 15 m 189 x 114 x 90 Download
4 (repaired).stl
7.38 MiB 61 h 55 min 49 m 165 x 219 x 132 Download
5 (repaired).stl
13.44 MiB 84 h 12 min 54 m 183 x 191 x 180 Download
6 (repaired).stl
13.44 MiB 84 h 27 min 55 m 182 x 191 x 180 Download
7 (repaired).stl
5.87 MiB 42 h 59 min 25 m 136 x 163 x 168 Download
8 (repaired).stl
5.87 MiB 42 h 57 min 25 m 136 x 163 x 167 Download
9 (repaired).stl
1.94 MiB 13 h 37 min 8 m 72 x 87 x 130 Download

Get ready to knock the socks off your friends with these scary DOOM 3D printable masks. Inspired by the character with the same name from the popular video game, DOOM mask is exactly what you need to make this Halloween memorable.

The mask consists of 11 separate parts that you must print and assemble together. It is not a simple mask. The mask is provided with a horned helmet that enables it to be worn on the head without additional elastic bands. 

But there’s more. If you’re not ready to wear such a scary mask for Halloween, the 3D modeler provides the files for a simplified DOOM mask for 3D printing. This mask has no horns but nevertheless will make a great accessory for the holiday party.

The files for the DOOM masks for 3D printing have been created in Autodesk Maya modeling program and checked in Netfabb. They are adapted to be handled in any 3D slicing program, such as CURA 15.06 or Simplify3D. You can print it in any printing material. To have the simple mask in printed form, the 3D printer will have to run for about 3 days and 4 hours, while the horned helmet mask will be printed in about 10 days.

After being printed, the mask with horns will stand 382mm deep, 384mm wide, and 597mm tall.

Buy DOOM 3D printable masks STL files by clicking the green Buy button in the top-right corner of the 3D model’s photo slider. Proceed to checkout. Provide your PayPal or credit card details and get yourself a Halloween mask that has no one has ever worn before. Get spooky this holiday with the mask of DOOM character.

Note: You can print the DOOM mask STL files with 3DHubs directly from our website. Put the checkmark in the box next to the file you want to print and click the Print with 3DHubs button.


This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:


  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

  • Infill speed: 50mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4


  • Infill pattern: Grid
  • Line distance: 3mm
  • Infill overlap: 20%
  • Infill layers: 0


  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Grid
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.


comments powered by Disqus

Similar items

Browse more newly listed 3D printings