Juggernaut Turbo Tank 3D Printing Model | Assembly

cm: 41.4 w x 72.5 d x 44.4 h
in: 16.299 w x 28.543 d x 17.48 h

Source Files




Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Juggernaut Turbo Tank 3D Printing Model comes in 3 versions for each 3D printer type (FFF/FDM and DLP/SLA/SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_hull_top_front_FDM (rep aired).stl
19.65 MiB 114 h 35 min 86 m Download
2_hull_top_front_cap_FDM (repaired).stl
1.48 MiB 4 h 41 min 3 m 100 x 64 x 16 Download
3_1_hull_top_center_a_FDM (repaired).stl
10.96 MiB 50 h 13 min 32 m Download
3_2_hull_top_center_a_FDM (repaired).stl
6.63 MiB 34 h 3 min 21 m 81 x 114 x 154 Download
4_1_hull_top_center_b_FDM (repaired).stl
7.56 MiB 50 h 4 min 31 m 99 x 123 x 99 Download
4_2_hull_top_center_b_FDM (repaired).stl
7.56 MiB 50 h 32 m 99 x 123 x 99 Download
4_3_hull_top_center_b_FDM (repaired).stl
14.61 MiB 75 h 23 min 53 m 100 x 134 x 136 Download
4_4_hull_top_center_b_FDM (repaired).stl
14.59 MiB 75 h 31 min 53 m 100 x 134 x 136 Download
5_1_hull_top_back_FDM (re paired).stl
14.18 MiB 55 h 16 min 40 m 97 x 123 x 133 Download
5_2_hull_top_back_FDM (re paired).stl
14.05 MiB 55 h 59 min 41 m 97 x 123 x 133 Download
6_hull_top_back_cap_FDM ( repaired).stl
1.54 MiB 5 h 8 min 3 m 148 x 65 x 18 Download
7_hull_bot_front_a_R_FDM (repaired).stl
1.32 MiB 7 h 4 m 45 x 68 x 71 Download
8_hull_bot_front_a_L_FDM (repaired).stl
1.31 MiB 7 h 10 min 4 m 45 x 68 x 71 Download
9_hull_bot_front_b_FDM (r epaired).stl
8.30 MiB 46 h 16 min 30 m 106 x 116 x 96 Download
10_hull_bot_center_a_FDM (repaired).stl
8.53 MiB 66 h 38 min 48 m 117 x 139 x 107 Download
11_hull_bot_center_b_FDM (repaired).stl
12.50 MiB 64 h 12 min 45 m 117 x 139 x 107 Download
12_hull_bot_center_c_FDM (repaired).stl
12.62 MiB 70 h 2 min 48 m 117 x 143 x 107 Download
13_hull_bot_back_a_FDM (r epaired).stl
0.21 MiB 19 h 28 min 11 m 82 x 107 x 81 Download
14_hull_bot_back_b_FDM (r epaired).stl
1.01 MiB 11 h 35 min 7 m 44 x 57 x 70 Download
15_hull_bot_back_c_L_FDM (repaired).stl
1.33 MiB 6 h 34 min 4 m 56 x 55 x 71 Download
16_hull_bot_back_c_R_FDM (repaired).stl
1.33 MiB 6 h 31 min 4 m 56 x 55 x 71 Download
17_hull_bot_back_door_FDM (repaired).stl
7.52 MiB 7 h 33 min 4 m 83 x 14 x 100 Download
18_cockpit_front_FDM (rep aired).stl
53.74 MiB 7 h 21 min 4 m 94 x 63 x 34 Download
19_cockpit_back_FDM (repa ired).stl
55.04 MiB 11 h 5 min 6 m 136 x 57 x 58 Download
20_front_window_FDM (repa ired).stl
0.01 MiB 48 min 1 m 106 x 58 x 7 Download
21_window_back_a_FDM (rep aired).stl
0.02 MiB 10 min <1 m 62 x 10 x 5 Download
22_window_back_b_FDM (rep aired).stl
0.01 MiB 19 min <1 m 92 x 4 x 7 Download
23_window_back_c_R_FDM (r epaired).stl
0.00 MiB 5 min <1 m 11 x 24 x 6 Download
24_window_back_c_L_FDM (r epaired).stl
0.00 MiB 5 min <1 m 11 x 24 x 6 Download
25_window_back_d_R_FDM (r epaired).stl
0.01 MiB 9 min <1 m 16 x 39 x 7 Download
26_window_back_d_L_FDM (r epaired).stl
0.01 MiB 9 min <1 m 16 x 39 x 7 Download
27_front_laser_R_FDM (rep aired).stl
0.52 MiB 49 min <1 m 14 x 20 x 36 Download
28_front_laser_L_FDM (rep aired).stl
0.52 MiB 48 min <1 m 14 x 20 x 36 Download
29_front_laser_cannon_a_F DM (repaired).stl
12.01 MiB 10 h 59 min 6 m 71 x 68 x 56 Download
30_front_laser_cannon_b_F DM (repaired).stl
3.04 MiB 2 h 1 min 1 m 14 x 17 x 63 Download
31_front_laser_cannon_c_F DM (repaired).stl
0.32 MiB 16 min <1 m Download
32_front_laser_cannon_d_F DM (repaired).stl
0.32 MiB 16 min <1 m 7 x 17 x 15 Download
33_panel_a_FDM (repaired) .stl
3.09 MiB 6 h 48 min 4 m 93 x 59 x 18 Download
34_panel_b_R_FDM (repaire d).stl
2.82 MiB 4 h 30 min 2 m 59 x 71 x 13 Download
35_panel_b_L_FDM (repaire d).stl
2.82 MiB 4 h 31 min 2 m Download
36_top_box_R_FDM (repaire d).stl
1.37 MiB 4 h 7 min 2 m 29 x 96 x 17 Download
37_top_box_L_FDM (repaire d).stl
1.37 MiB 4 h 8 min 2 m 29 x 96 x 17 Download
38_side_laser_a_R_FDM (re paired).stl
0.70 MiB 6 h 4 min 4 m 33 x 33 x 108 Download
39_side_laser_b_R_FDM (re paired).stl
1.63 MiB 2 h 49 min 2 m 68 x 22 x 50 Download
40_side_laser_cap_R_FDM ( repaired).stl
0.70 MiB 5 h 25 min 4 m 50 x 50 x 41 Download
41_side_laser_a_L_FDM (re paired).stl
0.70 MiB 6 h 10 min 4 m 33 x 33 x 108 Download
42_side_laser_b_L_FDM (re paired).stl
1.63 MiB 2 h 46 min 2 m 68 x 22 x 50 Download
43_side_laser_cap_L_FDM ( repaired).stl
0.70 MiB 5 h 25 min 4 m 50 x 50 x 41 Download
44_center_laser_cannon_a_ FDM (repaired).stl
0.48 MiB 6 h 23 min 4 m 66 x 66 x 28 Download
45_center_laser_cannon_b_ FDM (repaired).stl
1.50 MiB 1 h 18 min 1 m 35 x 35 x 82 Download
46_center_laser_cannon_c_ FDM (repaired).stl
2.15 MiB 3 h 54 min 2 m 28 x 52 x 43 Download
47_center_luke_R_FDM (rep aired).stl
0.23 MiB 45 min <1 m 32 x 32 x 10 Download
48_center_luke_L_FDM (rep aired).stl
0.23 MiB 45 min <1 m 32 x 32 x 10 Download
49_sentry_tower_a_FDM (re paired).stl
0.35 MiB 1 h 27 min 1 m 8 x 227 x 7 Download
50_sentry_tower_b_FDM (re paired).stl
4.42 MiB 46 min <1 m Download
51_sentry_tower_c_FDM (re paired).stl
7.65 MiB 3 h 1 min 2 m 52 x 53 x 40 Download
52_sentry_tower_d_FDM (re paired).stl
0.41 MiB 14 min <1 m 14 x 16 x 10 Download
53_sentry_tower_e_x24_FDM (repaired).stl
0.01 MiB 2 min <1 m 2 x 22 x 2 Download
54_back_radar_a_FDM (repa ired).stl
0.32 MiB 19 min <1 m 14 x 25 x 11 Download
55_back_radar_b_x4_FDM (r epaired).stl
0.01 MiB 1 min <1 m 13 x 1 x 1 Download
56_back_radar_c_FDM (repa ired).stl
1.05 MiB 15 min <1 m Download
57_back_luke_FDM (repaire d).stl
2.14 MiB 5 h 34 min 4 m 60 x 60 x 32 Download
58_side_gun_R_FDM (repair ed).stl
1.04 MiB 6 h 46 min 5 m 50 x 51 x 53 Download
59_side_gun_rail_a_R_FDM (repaired).stl
0.05 MiB 25 min <1 m 38 x 17 x 6 Download
60_side_gun_rail_b_R_FDM (repaired).stl
0.05 MiB 25 min <1 m 38 x 17 x 6 Download
61_side_gun_rail_c_R_FDM (repaired).stl
0.03 MiB 27 min <1 m Download
62_side_gun_L_FDM (repair ed).stl
1.04 MiB 4 h 38 min 2 m Download
63_side_gun_rail_a_L_FDM (repaired).stl
0.05 MiB 25 min <1 m 38 x 17 x 6 Download
64_side_gun_rail_b_L_FDM (repaired).stl
0.05 MiB 24 min <1 m 38 x 17 x 6 Download
65_side_gun_rail_c_L_FDM (repaired).stl
0.03 MiB 27 min <1 m Download
66_back_gun_R_FDM (repair ed).stl
0.72 MiB 42 min <1 m 22 x 41 x 19 Download
67_back_gun_L_FDM (repair ed).stl
0.73 MiB 42 min <1 m 22 x 41 x 19 Download
68_wheel_inner_x10_FDM (r epaired).stl
0.60 MiB 18 h 59 min 14 m Download
69_wheel_outer_x10_FDM (r epaired).stl
1.38 MiB 21 h 20 min 15 m 110 x 110 x 37 Download
70_wheel_inner_cap_x10_FD M (repaired).stl
0.66 MiB 2 h 55 min 2 m 80 x 80 x 6 Download
71_wheel_bearing_x10_FDM (repaired).stl
1.04 MiB 7 h 51 min 4 m 81 x 81 x 20 Download
72_wheel_ring_a_1_x10_FDM (repaired).stl
0.17 MiB 1 h 11 min 1 m 110 x 110 x 4 Download
73_wheel_ring_a_2_x10_FDM (repaired).stl
0.17 MiB 1 h 11 min 1 m 110 x 110 x 4 Download
74_wheel_ring_b_1_x10_FDM (repaired).stl
0.17 MiB 1 h 11 min 1 m 110 x 110 x 2 Download
75_wheel_ring_b_2_x10_FDM (repaired).stl
0.17 MiB 1 h 11 min 1 m 110 x 110 x 2 Download
76_wheel_ring_b_3_x10_FDM (repaired).stl
0.17 MiB 1 h 11 min 1 m 110 x 110 x 2 Download
77_wheel_ring_b_4_x10_FDM (repaired).stl
0.17 MiB 1 h 11 min 1 m 110 x 110 x 2 Download
78_wheel_ring_c_1_x10_FDM (repaired).stl
0.60 MiB 2 h 8 min 1 m 110 x 110 x 3 Download
79_wheel_ring_c_2_x10_FDM (repaired).stl
0.60 MiB 2 h 8 min 1 m Download
80_wheel_ring_d_1_x10_FDM (repaired).stl
0.17 MiB 2 h 22 min 1 m 110 x 110 x 2 Download
81_wheel_ring_d_2_x10_FDM (repaired).stl
0.17 MiB 2 h 22 min 1 m 110 x 110 x 2 Download
82_suspension_in_front_x2 _FDM (repaired).stl
0.56 MiB 3 h 23 min 2 m 35 x 16 x 90 Download
83_suspension_in_center_x 6_FDM (repaired).stl
0.41 MiB 2 h 11 min 2 m 34 x 15 x 61 Download
85_suspension_rail_center _x6_FDM (repaired).stl
0.04 MiB 1 h 7 min 1 m 16 x 12 x 70 Download
86_suspension_spring_x10_ FDM (repaired).stl
0.27 MiB 31 min <1 m 9 x 37 x 9 Download
87_suspension_out_center_ x6_FDM (repaired).stl
0.59 MiB 2 h 19 min 1 m Download
88_Ge_lock_10H_x151_FDM ( repaired).stl
0.03 MiB 10 min <1 m 15 x 29 x 3 Download
89_Panel_pin_x10_FDM (rep aired).stl
0.01 MiB 5 min <1 m 6 x 10 x 5 Download
90_GE_Connector_A_A_FDM ( repaired).stl
0.08 MiB 14 min <1 m 8 x 24 x 8 Download
91_GE_Connector_B_C_FDM ( repaired).stl
0.08 MiB 27 min <1 m 10 x 40 x 10 Download
92_suspension_out_front_b ack_x4_FDM (repaired).stl
0.40 MiB 1 h 46 min 1 m 43 x 22 x 58 Download
93_suspension_rail_front_ back_x4_FDM (repaired).st l
0.03 MiB 33 min <1 m 10 x 12 x 36 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min 1 m 150 x 18 x 5 Download
84_suspension_in_back_x2_ FDM (repaired).stl
0.54 MiB 2 h 26 min 2 m Download


The HAVw A6 Juggernaut goes by many names, but we love to call it simply Juggernaut or turbo tank. This monstrous hunk of metal is an almost indestructible and definitely an irreplaceable unit not only in the Grand Army of the Republic but also in every Star Wars fan's collection. The iconic vehicle stole the hearts of many with its brutal mighty, unique built and the ability to manoeuvre with ease across any terrain. Juggernaut is equipped with top-notch technologies, tremendous firepower, and nearly impenetrable armour that can withstand enemy fire by absorbing it. Hosting up to 300 brave passengers and smaller support vehicles, it makes the unbreakable backbone of the clone armies. Inspired by this ominous war-machine, our contributing artist spent about 210 hours to recreate its vigour in the form of a 3D printing model and made sure it will be an exciting showpiece. The artist furnished the model with heavy laser cannon turret and rapid-repeating heavy laser cannon on the top of the tank for all-round defence. The antipersonnel laser cannons and grenade launchers on the sides of the battle machine will make sure to destroy every enemy coming your way no matter the distance. The tank can cruise along the shelves of your collection on its ten distinctive massive wheels, each segment of which is known to move independently to ensure smooth off-road navigation. Even the inside of the cockpits is adorned with comfy seats and control panels for your clone troopers to work at. Luckily, it won't take travelling all the way to the planet Kuat to obtain Juggernaut, all you'll need to do is launch your 3D printer and get down to engineering. With the help of the Gambody model for 3D printing, you will finally get the chance to try steering the legendary turbo tank and make the Separatist forces turn tail.


HAVw A6 Juggernaut is a highly-detailed assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 76 hours in total. In order to stay true to the vehicle's massive size, the model was divided into as many assembly parts as needed to ensure that it will fit any 3D printer's build plate. The cutting of the model was chosen to ensure the cleanest 3D printing result possible and to minimise the amount of material needed to print the generated support, e.g. tank’s front twin blaster cannons, observation point, every single ladder rung, “jaw” that reveals the cannons, various hatches, etc. come as separate STL files. Additionally, the entire hull of the model in FFF/FDM 1.0 version, as well as some parts in DLP/SLA 1.0 and many parts in Eco version were made hollow to minimise the expenditure of material and time needed for printing. The windows to both cockpits were made into separate files to be printed in transparent PLA. The hatches of the cockpits can be taken off to showcase the highly-detailed interior. Various special mechanisms were introduced to ensure that the model has fully articulated elements in it: the sliding rails allow the antipersonnel laser cannons to extend from the hull, the upper heavy laser cannon turret rotates around the axis, and the rapid-repeating heavy laser cannon moves vertically, its gun can be fixed in two positions to match your battlefield installation perfectly. To ensure full mobility and independent movement of the ten wheels, each of them was equipped with rotating gear bearings and retractable suspension pistons, where the springs can be replaced with simple ball pen springs. The wheels themselves were divided into independent spinning segments to recreate the iconic all-terrain wheel system of the original vehicle. All assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the actual length of HAVw A6 Juggernaut that is 49400 mm. The 3D printing model's chosen scale is 1/68 for the FFF/FDM version and 1/136 for the DLP/SLA/SLS versions.


FFF/FDM 1.0 version features:
- Contains 98 parts;
- A printed model is 444 mm tall, 414 mm wide, 725 mm deep;
- Assembly kit includes lock 88_Ge_lock_10H_x151 to connect the model's parts securely without glue that needs to be printed 151 times;
- The body of the tank is completely hollow and has tunnels for you to introduce LED wiring into all spotlights and viewports;
- Windows on the main and rear viewports are provided separately to be printed with the transparent filament;
- Both smaller cockpit and commanding cockpit come with the highly-detailed interior;
- Rapid-repeating heavy laser cannon rotates, moves vertically and can be fixed in two positions with the help of new mechanism;
- Medium antipersonnel laser-cannon shaft extends from the hull; upper heavy laser cannon turret revolves on its axis;
- Grenade launcher retracts on a sliding rail and can be fixed in two positions with the help of new mechanism;
- Retractable suspension pistons are equipped with springs that can be replaced by any fitting metal springs;
- There are rotating gear bearings in all highly developed segmented wheels;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 39 parts;
- A printed model is 222 mm tall, 207 mm wide, 363 mm deep;
- Rapid-repeating heavy laser cannon rotates, moves vertically and can be fixed in two positions with the help of new mechanism;
- Medium antipersonnel laser-cannon shaft extends from the hull; upper heavy laser cannon turret revolves on its axis;
- Grenade launcher retracts on a sliding rail and can be fixed in two positions with the help of new mechanism;
- Both smaller cockpit and commanding cockpit come with the highly-detailed interior;
- There are rotating gear bearings in all ten wheels;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:
- Contains 39 parts;
- A printed model is 222 mm tall, 207 mm wide, 363 mm deep;
- Rapid-repeating heavy laser cannon rotates, moves vertically and can be fixed in two positions with the help of new mechanism;
- Medium antipersonnel laser-cannon shaft extends from the hull; upper heavy laser cannon turret revolves on its axis;
- Grenade launcher retracts on a sliding rail and can be fixed in two positions with the help of new mechanism;
- Both smaller cockpit and commanding cockpit come with the highly-detailed interior;
- There are rotating gear bearings in all ten wheels;
- Contains some hollowed out parts to save resin.


- STL files of Juggernaut Turbo Tank​​​ Model for 3D printing which consist of 176 parts;
- 3 versions of files for this model for FFF/FDM and DLP/SLA/SLS printers;
- High-poly detailed model of Juggernaut Turbo Tank​​​​;
Assembly Manual for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format;
- Detailed settings that we provide as a recommendation for Cura , Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the model of Juggernaut Turbo Tank​​ for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Juggernaut Turbo Tank​​ 3D Printing Model at Gambody YouTube channel.

Also, you may like other Star Wars 3D Printing Models.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at support@gambody.com)


You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
  Detect thin walls: Check
  Detect bridging perimeters: Check
  Seam position: Random
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
  Infill/Perimeters overlap: 20%
  Bridge flow ratio: 0.95
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm


comments powered by Disqus

Similar items

Browse more newly listed 3D printings