Make pre-order

(17)
big
cm: 47.8 w x 11.8 d x 41.3 h
in: 18.819 w x 4.646 d x 16.26 h
46
BUY FOR  $29.99

Source Files

|

Description

|

Printing Details

This 3d model consists of files in StereoLithography (.Stl) format that have been optimized for 3d printing.

Download parts atat_H2 and atat_H3 for free to check the printability and test the quality before buying all STL files of the 3D model.

Download Free Samples

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
atat_B1 (repaired) (repai red).stl
0.20 MiB 2 h 32 min
1 m
Download
atat_B2 (repaired) (repai red).stl
0.26 MiB 3 h 16 min
2 m
Download
atat_B3 (repaired) (repai red).stl
1.14 MiB 6 h 59 min
4 m
Download
atat_B4 (repaired) (repai red).stl
0.70 MiB 7 h 2 min
4 m
Download
atat_B5 (repaired) (repai red).stl
0.26 MiB 2 h 59 min
2 m
Download
atat_B6 (repaired) (repai red).stl
0.22 MiB 2 h 28 min
1 m
Download
atat_B7 (repaired) (repai red).stl
0.13 MiB 51 min
<1 m
Download
atat_B8 (repaired) (repai red).stl
0.07 MiB 2 h 43 min
2 m
Download
atat_B9 (repaired) (repai red).stl
0.07 MiB 13 h 3 min
10 m
Download
atat_B10 (repaired) (repa ired).stl
0.36 MiB 21 h 8 min
12 m
Download
atat_B11 (repaired) (repa ired).stl
0.43 MiB 19 h 24 min
18 m
Download
atat_B12 (repaired) (repa ired).stl
0.02 MiB 5 h 32 min
3 m
Download
atat_B13 (repaired) (repa ired).stl
0.02 MiB 3 h 44 min
2 m
Download
atat_B14 (repaired) (repa ired).stl
0.40 MiB 19 h 22 min
18 m
Download
atat_B15 (repaired) (repa ired).stl
0.85 MiB 10 h 9 min
6 m
Download
atat_B16 (repaired) (repa ired).stl
0.16 MiB 23 h 37 min
16 m
Download
atat_B17 (repaired) (repa ired).stl
0.16 MiB 25 h 28 min
18 m
Download
atat_B18 (repaired) (repa ired).stl
0.15 MiB 22 min
<1 m
Download
atat_B19 (repaired) (repa ired).stl
0.01 MiB 37 min
<1 m
Download
atat_B20 (repaired) (repa ired).stl
0.23 MiB 4 h 28 min
3 m
Download
atat_B21 (repaired) (repa ired).stl
0.15 MiB 22 min
<1 m
Download
atat_B22 (repaired) (repa ired).stl
0.01 MiB 37 min
<1 m
Download
atat_B23 (repaired) (repa ired).stl
0.16 MiB 6 h 16 min
4 m
Download
atat_B24 (repaired) (repa ired).stl
0.22 MiB 7 h 29 min
4 m
Download
atat_B25 (repaired) (repa ired).stl
0.52 MiB 4 h 41 min
3 m
Download
atat_B26 (repaired) (repa ired).stl
0.37 MiB 54 min
<1 m
Download
atat_duble fing 1 (repair ed).stl
0.03 MiB 18 min
<1 m
Download
atat_duble fing 2 (repair ed).stl
0.03 MiB 18 min
<1 m
Download
atat_duble fing 3 (repair ed).stl
0.03 MiB 18 min
<1 m
Download
atat_duble fing 4 (repair ed).stl
0.03 MiB 18 min
<1 m
Download
atat_duble fing 5 (repair ed).stl
0.03 MiB 18 min
<1 m
Download
atat_duble fing 6 (repair ed).stl
0.03 MiB 18 min
<1 m
Download
atat_duble fing 7 (repair ed).stl
0.03 MiB 18 min
<1 m
Download
atat_duble fing 8 (repair ed).stl
0.03 MiB 18 min
<1 m
Download
atat_G1 (repaired) (repai red).stl
0.21 MiB 1 h 1 min
1 m
Download
atat_G2 (repaired) (repai red).stl
0.20 MiB 1 h 21 min
1 m
Download
atat_G3 (repaired) (repai red).stl
3.87 MiB 1 h 40 min
1 m
Download
atat_G4 (repaired) (repai red).stl
0.08 MiB 2 h 60 min
2 m
Download
atat_G5 (repaired) (repai red).stl
0.01 MiB 15 min
<1 m
Download
atat_G6 (repaired) (repai red).stl
0.04 MiB 29 min
<1 m
Download
atat_G7 (repaired) (repai red).stl
0.11 MiB 1 h 38 min
1 m
Download
atat_H1 (repaired) (repai red).stl
0.38 MiB 1 h 26 min
1 m
Download
atat_H4 (repaired) (repai red).stl
0.16 MiB 7 h 29 min
4 m
Download
atat_L1 (repaired) (repai red).stl
0.67 MiB 12 h 22 min
8 m
Download
atat_L2 (repaired) (repai red).stl
0.81 MiB 14 h 58 min
9 m
Download
atat_L3 (repaired) (repai red).stl
0.57 MiB 3 h 54 min
2 m
Download
atat_L4 (repaired) (repai red).stl
0.56 MiB 3 h 53 min
2 m
Download
atat_L5 (repaired) (repai red).stl
0.56 MiB 3 h 53 min
2 m
Download
atat_L6 (repaired) (repai red).stl
0.56 MiB 3 h 54 min
2 m
Download
atat_L7 (repaired) (repai red).stl
0.61 MiB 6 h 15 min
4 m
Download
atat_L8 (repaired) (repai red).stl
0.61 MiB 6 h 15 min
4 m
Download
atat_L9 (repaired) (repai red).stl
0.61 MiB 6 h 15 min
4 m
Download
atat_L10 (repaired) (repa ired).stl
0.61 MiB 6 h 15 min
4 m
Download
atat_L11 (repaired) (repa ired).stl
0.71 MiB 5 h 43 min
4 m
Download
atat_L12 (repaired) (repa ired).stl
0.71 MiB 5 h 43 min
4 m
Download
atat_L13 (repaired) (repa ired).stl
0.71 MiB 5 h 47 min
4 m
Download
atat_L14 (repaired) (repa ired).stl
0.71 MiB 5 h 48 min
4 m
Download
atat_L15 (repaired) (repa ired).stl
0.04 MiB 51 min
<1 m
Download
atat_L16 (repaired) (repa ired).stl
0.04 MiB 51 min
<1 m
Download
atat_L17 (repaired) (repa ired).stl
0.04 MiB 51 min
<1 m
Download
atat_L18 (repaired) (repa ired).stl
0.04 MiB 51 min
<1 m
Download
atat_L19 (repaired) (repa ired).stl
1.82 MiB 9 h 48 min
6 m
Download
atat_L20 (repaired) (repa ired).stl
1.82 MiB 9 h 48 min
6 m
Download
atat_L21 (repaired) (repa ired).stl
1.82 MiB 9 h 49 min
6 m
Download
atat_L22 (repaired) (repa ired).stl
1.82 MiB 9 h 49 min
6 m
Download
atat_H2 (repaired) (repai red).stl
0.68 MiB 9 h 20 min
7 m
Download
atat_H3 (repaired) (repai red).stl
5.18 MiB 27 h 18 min
18 m
Download

The ferocious four-legged AT-AT Walker 3D printable model, from the hugely popular science fiction franchise, is a well-armored combat machine and has varied weaponry installed on board. The machine is immune to blasts and it is unbelievably good against infantry. It is enhanced with dual light blasters and other 2 large laser guns. AT-AT Walker can provide reliable cover for the soldiers on foot.

The AT-AT Walker 3D print model is made up of 75 parts. We’ve grouped them by parts and numbered them, to facilitate printing and assembly process. It is 47.8cm wide, 11.8cm deep and 41.3cm tall.Check out AT-ST Walker 3D model if you want more warriors from this video game.

This model is available in .STL files and has been tested for errors by our designers, to ensure the best printing results. Also, the files are adapted for printing on two types of 3D printers: FFF and SLA/SLS.

You can buy the AT-AT 3D printing files by simply clicking on the “Buy” button. Proceed with entering your PayPal account or credit card details and you can download your .STL files once the payment has been processed.

This model was tested in Cura 3.4.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell
Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill
Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material
Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s

Speed 
Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 3 mm
Support Z Distance: 0.1 mm
    Support Top Distance: 0.1 mm
    Support Bottom Distance: 0.1 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus
Other author's 3D printings

Tags

star wars, star wars robots, game models, at-at, swset

Similar items

Browse more newly listed 3D printings