Make pre-order

YoRHa 2B 3D Printing Figurine | Assembly

cm: 23.4 w x 18.7 d x 24.7 h
in: 9.213 w x 7.362 d x 9.724 h
BUY FOR  $24.99

Source Files




Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

YoRHa 2B 3D Printing Figurine comes in 3 versions for each 3D printer type (FFF/FDM, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
11.96 MiB 48 min
<1 m
20 x 27 x 26 Download
2_head_with_visor_FDM(rep aired).stl
12.28 MiB 48 min
<1 m
22 x 27 x 26 Download
3_hear_front_FDM(repaired ).stl
9.56 MiB 41 min
<1 m
26 x 31 x 15 Download
5_headband_FDM(repaired). stl
1.77 MiB 5 min
<1 m
26 x 15 x 5 Download
18.49 MiB 2 h 23 min
1 m
34 x 36 x 44 Download
9.21 MiB 1 h 19 min
1 m
32 x 29 x 38 Download
9.31 MiB 1 h 15 min
1 m
20 x 21 x 50 Download
24.61 MiB 3 h 11 min
2 m
51 x 40 x 54 Download
10_legs_with_dress_FDM(re paired).stl
38.44 MiB 17 h 46 min
13 m
86 x 97 x 73 Download
11_leg_R_FDM(repaired).st l
20.44 MiB 3 h 6 min
2 m
26 x 52 x 109 Download
12_leg_L_FDM(repaired).st l
21.86 MiB 3 h 13 min
2 m
28 x 58 x 114 Download
13_bow_knot_FDM(repaired) .stl
4.59 MiB 33 min
<1 m
29 x 12 x 28 Download
14_hand_L_FDM (repaired). stl
9.28 MiB 1 h 19 min
1 m
25 x 26 x 42 Download
15_hand_with_sword_L_FDM (repaired).stl
9.08 MiB 1 h 15 min
<1 m
25 x 26 x 36 Download
16_hand_with_sword_R_FDM (repaired).stl
7.20 MiB 1 h 17 min
1 m
26 x 25 x 38 Download
17_sword_L_1_FDM(repaired ).stl
1.98 MiB 29 min
<1 m
9 x 6 x 39 Download
18_sword_L_2_FDM(repaired ).stl
7.51 MiB 2 h 25 min
2 m
63 x 124 x 62 Download
19_sword_R_1_FDM(repaired ).stl
3.28 MiB 33 min
<1 m
7 x 6 x 42 Download
21_platform_FDM(repaired) .stl
25.86 MiB 13 h 26 min
8 m
175 x 107 x 16 Download
22_Ge_lock_7S_(x2)_FDM(re paired).stl
0.02 MiB 4 min
<1 m
7 x 18 x 2 Download
10_legs_with_dress_v2_1_F DM(repaired).stl
27.96 MiB 2 h 38 min
1 m
51 x 40 x 39 Download
10_legs_with_dress_v2_2_F DM(repaired).stl
27.65 MiB 15 h 7 min
11 m
86 x 97 x 73 Download
23_Pod042_Platform_FDM (r epaired).stl
8.08 MiB 55 min
<1 m
46 x 46 x 11 Download
24_Pod042_Column_FDM (rep aired).stl
0.21 MiB 26 min
<1 m
4 x 194 x 3 Download
25_Pod042_Pelvis_FDM (rep aired).stl
1.29 MiB 21 min
<1 m
24 x 21 x 9 Download
26_Pod042_Body_FDM (repai red).stl
0.13 MiB 8 min
<1 m
8 x 13 x 12 Download
27_Pod042_Head_FDM (repai red).stl
13.08 MiB 1 h 16 min
1 m
20 x 36 x 18 Download
28_Pod042_Light_FDM (repa ired).stl
0.04 MiB 3 min
<1 m
5 x 5 x 11 Download
29_Pod042_Arm_R_FDM (repa ired).stl
0.25 MiB 11 min
<1 m
5 x 12 x 21 Download
30_Pod042_Leg_R_FDM (repa ired).stl
1.62 MiB 30 min
<1 m
7 x 28 x 26 Download
31_Pod042_Hand_R_FDM (rep aired).stl
0.41 MiB 14 min
<1 m
7 x 12 x 15 Download
32_Pod042_Arm_L_FDM (repa ired).stl
0.25 MiB 11 min
<1 m
5 x 12 x 21 Download
33_Pod042_Leg_L_FDM (repa ired).stl
1.62 MiB 30 min
<1 m
7 x 28 x 26 Download
34_Pod042_Hand_L_FDM (rep aired).stl
0.41 MiB 13 min
<1 m
7 x 12 x 15 Download
20_sword_R_2_FDM(repaired ).stl
10.53 MiB 2 h 39 min
2 m
32 x 145 x 55 Download
35_platform_cut_a_FDM(rep aired).stl
27.01 MiB 7 h 17 min
4 m
95 x 104 x 16 Download
36_platform_cut_b_FDM(rep aired).stl
24.86 MiB 6 h 59 min
4 m
89 x 104 x 16 Download
4_hear_rear_FDM(repaired) .stl
18.97 MiB 1 h 16 min
1 m
31 x 30 x 18 Download


‘Glory to Mankind’ is an official title of the battle-type android YoRHa No.2 Type B or 2B who is the main protagonist of the Route A in NieR: Automata video game. YoRHa is a military android force that is designed to fight alien machine forms that invaded Earth during the 14th Machine War set in the year 11945 AD. 2B is a unit of the automated YoRHa infantry, equipped with all-purpose weapons and is always accompanied by a floating robot POD 042 that serves for range attacks. The battle android rarely removes the military visor that conceals her eyes. In chapter one of NieR: Automata 2B’s support officer assigns her to follow and observe one of the new Scanner type androids 9S during the force’s operations against the planet’s invaders. Despite androids’ built-in restraint who barely show their emotions, 2B grows used to her designated partner. Therefore, execution of her initial task to deal with 9S if he happens to find out the truth about Project YoRHa brings the Type B android a lot of pain.


The model is saved in STL files, a format supported by most 3D printers

FFF/FDM version features:
- Contains 34 parts;
- Assembly kit includes Locks. One part of Locks (22_Ge_lock_7S_(x2)_FDM) needs to be printed twice;
- Made with 2 variants of head with visor and without it;
- Wings with 2 variants of costume with dress and self destruct;
- Made with a special stylized platform and accompanied by a floating robot POD 042;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA version features:
- Same as FDM but smaller, also made as 19 parts;

SLS version features:
- Same as SLA but made as 1 piece to save your materialconsists of 3 variants of YoRHa 2B and 3 parts of POD 042;

All STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for CURA 3.5.1Simplify3D or Slic3r Software.

There are 34 parts for FFF/FDM version, 19 parts for DLP/SLA, and 6 parts for SLS.

Scale: YoRHa 2B actual height is 1680 mm. The model’s chosen scale is 1/8 for the FFF/FDM version and 1/16 for the DLP/SLA/SLS version.

FFF/FDM version dimensions:
A printed model is 247 mm tall, 234 mm wide, 187 mm deep;

DLP/SLA/SLS version dimensions:
A printed model is 124 mm tall, 117 mm wide, 94 mm deep;
- Has few details, to keep printing costs down.


- STL files of YoRHa 2B 3D Figurine and POD 042 Model for 3D printing which consist of 59 parts;
- 3 versions of files for this model for FFF/FDM, DLP/SLA, and SLS;
- High-poly detailed figurine of YoRHa 2B and POD 042 model;
- Detailed settings that we provide for Cura 3.5.1, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get Model of YoRHa 2B for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble YoRHa 2B 3D Printing Figurine at Gambody YouTube channel.

Also, you may like other Anime 3D Printing Figurines.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.5.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
    Support Speed: 45 mm/s 
     Support Infill Speed: 45 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 45 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.6562 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 2.2 mm
Support Z Distance: 0.12 mm
    Support Top Distance: 0.12 mm
    Support Bottom Distance: 0.12 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 15 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
  Detect thin walls: Check
  Detect bridging perimeters: Check
  Seam position: Random
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
  Infill/Perimeters overlap: 20%
  Bridge flow ratio: 0.95
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm


comments powered by Disqus
Other author's 3D printings


  • loading reviews..

Similar items

Browse more newly listed 3D printings