Cherno Alpha 3D Model | Assembly

cm: 14.1 w x 7 d x 25 h
in: 5.551 w x 2.756 d x 9.843 h

Source Files




Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Download parts 2 and 6 for free to check the printability and test the quality before buying all STL files of the 3D model.

Download Free Samples

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1 (repaired).stl
3.93 MiB 14 h 37 min 10 m 87 x 67 x 75 Download
3 (repaired).stl
0.86 MiB 1 h 25 min 1 m 18 x 47 x 18 Download
4 (repaired).stl
0.85 MiB 1 h 25 min 1 m 18 x 47 x 18 Download
5 (repaired).stl
12.20 MiB 3 h 53 min 2 m 26 x 38 x 75 Download
6 (repaired).stl
12.20 MiB 3 h 53 min 2 m 27 x 38 x 75 Download
7 (repaired).stl
8.78 MiB 3 h 18 min 2 m 28 x 47 x 56 Download
8 (repaired).stl
8.78 MiB 3 h 18 min 2 m 27 x 47 x 56 Download
9 (repaired).stl
4.90 MiB 2 h 29 min 1 m 34 x 66 x 24 Download
10 (repaired).stl
4.90 MiB 2 h 29 min 1 m 34 x 66 x 24 Download
11 (repaired).stl
12.44 MiB 3 h 15 min 2 m 70 x 42 x 31 Download
12 (repaired).stl
12.45 MiB 3 h 14 min 2 m 70 x 42 x 31 Download
13 (repaired).stl
7.38 MiB 4 h 37 min 3 m 28 x 27 x 81 Download
14 (repaired).stl
7.38 MiB 4 h 34 min 3 m 29 x 28 x 81 Download
2 (repaired).stl
35.99 MiB 19 h 9 min 10 m 72 x 73 x 82 Download

Cherno Alpha 3D model represents the Russian Jaeger that served as a defender along the coastline of Russia and the Siberian perimeter. Its service kept this territory out of any extraordinary incidents for six long years. Piloted by a couple, Sasha and Aleksis Kaidonovsky, Cherno Alpha is the oldest Jaeger still used in combat.

Its story starts in 2015 when it is launched in service. By 2025, Cherno Alpha is the only survivor Jaeger active in war and serving the mission it was built in the first place.

The 3D printing replica of Cherno Alpha Jaeger from the acclaimed movie will give you the opportunity to have this courageous fighter in the physical world.

The Cherno Alpha 3D model is sculpted in Autodesk Maya 3D modeling program. It is a poseable 3D model, with workable arms and legs. It features workable joints for extra-operability and great surface detail, for an enhanced outer shell.

The 3D model is adapted to be 3D printed on any type of 3D printer and is converted into STL file format. All prints the 3D model consists of are made solid, to ensure an effortless 3D printing experience and high-quality output.

To be more specific, Cherno Alpha 3D model is made of 14 parts, by one STL for every print. The STL files are checked and corrected in Netfabb. They are error-free and ready to be sent to your 3D printer.

After being 3D printed, the Cherno Alpha 3D model will stand 70 mm deep, 250 mm tall, and 141 mm wide.

Buy Cherno Alpha 3D model STL files by clicking the green Buy button in the top corner of the model’s page. Proceed to checkout. Insert your PayPal or credit card details.

Download the files in a .zip folder and start 3D printing immediately.

If you don’t own a 3D printer yet, we have the solution that will help you 3D print any model featured on our marketplace directly from our website. Select the STL files you want to 3D print and choose between the 3DHubs or Treatstock 3D printing services.  

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:


  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

  • Infill speed: 30mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4


  • Infill pattern: Grid
  • Line distance: 1.5mm
  • Infill overlap: 20%
  • Infill layers: 0


  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Grid
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.


comments powered by Disqus

Similar items

Browse more newly listed 3D printings