Premium Stock

Princess Leia 3D Printing Figurine | Assembly

cm: 16.6 w x 14.6 d x 20.6 h
in: 6.535 w x 5.748 d x 8.11 h

Source Files




Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Princess Leia 3D Printing Figurine comes in 7 versions for each 3D printer type (FFF/FDM, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing figurine is available in the DESCRIPTION section.

    File Name File Size Time / Filament Object Size
    (x/y/z mm)
    1.96 MiB 36 min <1 m 11 x 9 x 40 Download
    20.38 MiB 6 h 43 min 4 m 53 x 36 x 90 Download
    1.37 MiB 36 min <1 m 58 x 22 x 11 Download
    0.03 MiB 6 min <1 m 15 x 5 x 5 Download
    0.03 MiB 6 min <1 m 15 x 5 x 5 Download
    3.21 MiB 3 h 5 min 2 m 38 x 30 x 86 Download
    3.30 MiB 1 h 51 min 1 m 70 x 86 x 41 Download
    2.77 MiB 1 h 25 min 1 m 73 x 71 x 23 Download
    2.31 MiB 51 min <1 m 15 x 29 x 46 Download
    2.58 MiB 50 min <1 m 18 x 23 x 51 Download
    3.31 MiB 1 h 16 min 1 m 141 x 141 x 25 Download
    12_Body_v2_FDM (repaired) .stl
    15.16 MiB 5 h 1 min 3 m 53 x 35 x 65 Download
    13_Head_FDM (repaired).st l
    14.80 MiB 1 h 29 min 1 m 20 x 33 x 33 Download
    14_Glave_v2_1_FDM (repair ed).stl
    6.43 MiB 55 min <1 m 25 x 8 x 61 Download
    15_Glave_v2_2_FDM (repair ed).stl
    5.60 MiB 19 min <1 m 5 x 5 x 49 Download
    16_Glave_v2_3_FDM (repair ed).stl
    2.30 MiB 6 min <1 m 41 x 41 x 3 Download
    17_Glave_v2_4_FDM (repair ed).stl
    3.71 MiB 29 min <1 m 8 x 8 x 45 Download


    Princess Leia Organa was one of the Rebel Alliance’s most fearless leaders, an accomplished Senator and a great Jedi Knight of the New Jedi Order. Known as an unshakable leader during the Galactic Civil War and other subsequent galactic conflicts, Leia Organa Solo is considered to be one of the main heroes of the galaxy and, consequently, a well-loved character among George Lucas’ universe fans. The princess of Alderaan is depicted in her iconic "metal bikini" slave outfit from Return of the Jedi. The author of the figurine for 3D printing made sure to include all fine details that make the character’s image so popular among epic space franchise fans as well as cosplayers all over the world. 3D printing Leia is wearing a patterned brassiere coupled with a loincloth and her hair is styled in a braided ponytail that cascades over her right shoulder. In the left hand, Leia Organa is shown holding Selonian glaive. Besides, judging from 3D printing Leia’s outfit one can clearly tell that 3D artist was drawing inspiration from specific film scenes where princess became Jabba the Hutt’s slave. Therefore, the model for 3D printing is made standing on the platform that was designed so to resemble the lookout of Khetanna sail barge. Princess Leia Organa is an extremely brave and adventurous heroine and is also such a popular franchise character that your Star Wars collection won’t do without a 3D printed Leia figurine!


    Princess Leia figurine for 3D printing is a static assembly model and its updating and adaptation for different types of 3D printers took Gambody team 58 hours in total. Upon one of our customer's request, Gambody team got down to the preparation of the platform for the Leia figurine and in the course of the work the decision was reached to upgrade the model as a whole. So for all the Star Wars fans to print the cleanest figurine possible the model was cut into assembly parts anew and adapted for different types of 3D printers taking into account the present-day technology advancements. Princess Leia’s anatomy, facial features and body proportions were thoroughly reviewed during the moderation process for the Organa to be depicted harmoniously in the intended pose. The model’s cutting was chosen by our team to minimise the amount of filament needed for generated support and some of the parts were hollowed out for you in the model’s Eco version to save resin. In order to ensure the smooth 3D printed result, Leia’s knee-high boots, braided ponytail, Selonian glaive as well as the parts of the Khetanna sail barge-like platform are now provided as separate STL files. All the assembly parts are provided in STL files in recommended positions that were worked out so to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. 

    The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

    The model's scale was calculated from Princess Leia's actual height that is 1500 mm. The 3D printing figurine's chosen scale is 1/8 for the FFF/FDM version and 1/16 for the DLP/SLA/SLS versions.


    FFF/FDM 1.0 version features:
    - Contains 11 parts;
    - A printed model is 187 mm tall, 125 mm wide, 58 mm deep
    - Made with the figurine's skirt and Selonian glaive separated to ensure clean printing result;
    - Assembly kit includes connectors to attach the skirt pieces securely without glue.

    FFF/FDM 2.0 version features:
    - Contains 26 parts;
    - A printed model is 206 mm tall, 166 mm wide, 146 mm deep;
    - The figurine is significantly improved in accordance with anatomy and body and face proportions rules;
    - Introduced new cutting and enhanced level of detail;
    - Made with a platform to resemble the scenes of Organa being enslaved on Khetanna sail barge;
    - All parts are divided in such a way that you will print them with the smallest number of support structures.

    DLP/SLA 1.0 version features:
    - Contains 7 parts;
    - A printed model is 103 mm tall, 83 mm wide, 73 mm deep;
    - Made with a platform to resemble the scenes of Organa being enslaved on Khetanna sail barge;
    - All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

    DLP/SLA Eco 1.0 version features:
    - Contains 7 parts;
    - A printed model is 103 mm tall, 83 mm wide, 73 mm deep;
    - Made with a platform to resemble the scenes of Organa being enslaved on Khetanna sail barge;
    - Contains some hollowed out parts to save resin.

    DLP/SLA Pre-supported 1.0 version features:
    - Contains 7 parts;
    - A printed model is 103 mm tall, 83 mm wide, 73 mm deep;
    - The STL files that this version comprises are pre-supportedhollowed out, and have drain holes where needed;
    - You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate;
    - When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact.

    SLS 1.0 version features:
    - Contains 1 part;
    - A printed model is 94 mm tall, 62 mm wide, 29 mm deep;

    SLS 2.0 version features:
    - Made as a solid one-piece figurine;
    - A printed model is 103 mm tall, 83 mm wide, 73 mm deep;
    - The figurine is significantly improved in accordance with anatomy and body and face proportions rules;
    - Introduced new cutting and enhanced level of detail;
    - Contains 3 parts - a one-piece model and a figurine with the platform separated.


    - STL files of Princess Leia​ 3D Figurine for 3D printing which consist of 62 parts;
    - 7 versions of files for this model for FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS;
    - High-poly detailed figurine of Princess Leia​;
    - Detailed settings that we provide as a recommendation for Cura , Simplify3D and Slic3r for the best print;
    - Full technical support from the Gambody Support Team.

    You can get the figurine of Princess Leia​ for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

    Watch the tutorial on how to assemble Princess Leia​ 3D Printing Figurine at Gambody YouTube channel.

    Also, you may like other Space War Online 3D Printing Figurines.


    Where can I print a model if I have no printer?
    How to get started with 3D printing?
    How to set up my 3D printer?
    How to choose right 3D model print bed positioning? 
    How to paint printed figurine?


    Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

    Cura printing recommendations:

    These are basic settings that were tested in Cura 4.8.0 slicer. 

    The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

    Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

    - You can scale up the model (downscaling is not recommended!);
    - All connectors should be printed at 100% Infill;
    - For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

    Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
    Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

    Line Width: 0.4 mm
    Wall Line Width: 0.4 mm
    Outer Wall Line Width: 0.4 mm
    Inner Wall(s) Line Width: 0.4 mm
    Top/Bottom Line Width: 0.4 mm
    Infill Line Width: 0.4 mm
    Skirt/Brim Line Width: 0.4 mm
    Support Line Width: 0.4 mm

    Initial Layer Line Width: 100%

    Wall Thickness: 0.8 mm
    Wall Line Count: 2

    Outer Wall Wipe Distance: 0.3 mm
    Top Surface Skin Layers: 0

    Top/Bottom Thickness: 0.6 mm
    Top Thickness: 0.6 mm
    Top Layers: 5
    Bottom Thickness: 0.6 mm
    Bottom Layers: 5
    Initial Bottom Layers: 5

    Top/Bottom Pattern: Lines
    Bottom Pattern Initial Layer: Lines
    Top/Bottom Line Directions: [ ]
    Outer Wall Inset: 0 mm
    Optimize Wall Printing Order: Check

    Compensate Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check

    Minimum Wall Flow: 0%
    Fill Gaps Between Walls: Everywhere
    Filter Out Tiny Gaps: Check
    Horizontal Expansion: 0 mm
    Initial Layer Horizontal Expansion: 0 mm
    Hole horizontal expansion: 0

    Z Seam Alignment: User Specified
    Z Seam Position: Back
    Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
    Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

    Seam Corner Preference: Hide Seam
    Extra Skin Wall Count: 1
    Skin Overlap Percentage: 10%
    Skin Overlap 0.04 mm

    Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
    Infill Pattern: Triangles
    Connect Infill Lines: Check
    Infill Line Directions: [ ]
    Infill X Offset: 0 mm
    Infill Y Offset: 0 mm
    Infill Line Multiplier: 1
    Extra Infill Wall Count: 0

    Infill Overlap Percentage: 10-20%
    Infill Overlap: 0.04 mm

    Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm

    Infill Wipe Distance: 0 mm
    Infill Layer Thickness: 0.24 mm
    Gradual Infill Steps: 0
    Infill Before Walls: Check
    Minimum Infill Area: 0 mm2

    Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm

    Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8

    Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0
    Skin Edge Support Thickness: 0
    Skin Edge Support Layers: 0

    Initial Layer Flow: 100%
    Printing Temperature: See your filament settings
    Initial Printing Temperature: Your filament settings
    Final Printing Temperature: Your filament settings
    Build Plate Temperature: Your filament settings
    Build Plate Temperature Initial Layer: Your filament settings + 5°
    Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at


    You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

    Print Speed: 50 mm/s
        Infill Speed: 50 mm/s
        Wall Speed: 25 mm/s
              Outer Wall Speed:25 mm/s
              Inner Wall Speed: 50 mm/s

    Top/Bottom Speed: 25mm/s
    Support Speed: 25 mm/s 
              Support Infill Speed: 45 mm/s
              Support Interface Speed: 25 mm/s
                    Support Roof Speed: 25 mm/s
                    Support Floor Speed: 25 mm/s

    Travel Speed: 80 mm/s
    Initial Layer Speed: 80 mm/s
    Initial Layer Print Speed: 20 mm/s
    Initial Layer Travel Speed: 80 mm/s

    Skirt/Brim Speed: 20 mm/s
    Z  Hop Speed: 5 mm/s
    Number of Slower Layers: 2
    Enable Acceleration Control: Check

    When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

    Enable Retraction: Check
    Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

    Retraction Speed: 25mm/s
    Retraction Retract Speed: 25 mm/s
    Retraction Prime Speed: 25 mm/s

    Retraction Extra Prime Amount: 0 mm3 
    Retraction Minimum Travel: 1.5 mm
    Maximum Retraction Count: 100
    Minimum Extrusion Distance Window: 6,5 - 10 mm
    Limit Support Retractions: Check
    Combing Mode: All
    Max Comb Distance With No Retract: 30 mm
    Retract Before Outer Wall: Check
    Avoid Printed Parts When Travelling: Check
    Avoid Supports When Travelling: Check
    Travel Avoid Distance: 1 mm
    Layer Start X: 0.0 mm
    Layer Start Y: 0.0 mm
    Z Hop When Retracted: Check
    Z Hop Height: 0,3 mm

    Enable Print Cooling: Check
    Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 

    Regular/Maximum Fan Speed Threshold: 10 s
    Initial Fan Speed: 0%
    Regular Fan Speed at Height: 0.36 mm
    Regular Fan Speed at Layer: 3 

    Minimum Layer Time: 10 s
    Minimum Speed: 10 mm/s

    Generate Support: Check
    Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
    Support Placement: Everywhere 
    Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
    Support Pattern: Zig Zag
    Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

    Support Density: 15%
    Support Line Distance: 2.6667 mm
    Initial layer support line distance: 2.667 mm

    Support Z Distance: 0.12 mm
    Support Top Distance: 0.12 mm
    Support Bottom Distance: 0.12 mm

    Support X/Y Distance: 0.8-1 mm
    Support Distance Priority: Z overrides X/Y
    Support Stair Step Height: 0.3 mm
    Support Stair Step Maximum Width: 5.0 mm
    Support Stair Step Minimum Slope Angle: 10°
    Support Join Distance: 2.0 mm
    Support Horizontal Expansion: 0.2 mm
    Support Infill Layer Thickness: 0.2 mm
    Gradual Support Infill Steps: 0
    Minimum Support Area: 2 mm

    Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
    Enable Support Roof: Check
    Enable Support Floor: Check

    Support Interface Thickness: 0.8 mm
    Support Roof Thickness: 0.8 mm
    Support Floor Thickness: 0.8 mm

    Support Interface Resolution 0.2 mm
    Support Interface Density: 50-100%
            Support Roof Density: 50-100%
    Support Roof Line Distance: 0.8 mm
            Support Floor Density: 50-100%
    Support Floor line Distance:  0.4mm

    Support Interface Pattern: Grid 
    Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
    Support Floor Pattern: Grid

    Minimum Support Interface Area: 10mm
    Minimum Support Roof Area: 10 mm
    Minimum Support Floor Area: 10 mm

    Support Interface Horizontal Expansion: 0.0 mm
    Support Roof Horizontal Expansion: 0.0 mm
    Support Floor Horizontal Expansion: 0.0 mm

    Fan Speed Override: Check
    Supported Skin Fan Speed: 100%
    Use Towers: Check
    Tower Diameter: 4 mm
    Minimum Diameter: 3.0 mm
    Tower Roof Angle: 65° 

    Build Plate Adhesion 
    Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
    Skirt/Brim Minimum Length: 250 mm
    Brim Width: 8.0 mm
           Brim Line Count: 10
    Brim Only on Outside: Check

    Mesh Fixes 
    Union Overlapping Volumes: Check
    Merged Meshes Overlap: 0.15 mm

    Special Modes
    Print Sequence: All at Once
    Surface Mode: Normal

    Slicing Tolerance: Middle
    Maximum Resolution: 0.01 mm
    Flow rate compensation max extrusion offset: 0 mm
    Flow rate compensation factor: 100%

    Simplify3D printing recommendations:

    This model was tested with PLA material.

    To avoid printing problems, we recommend the following settings:

    Nozzle Diameter: 0.4 mm
    Extrusion Multiplier: 0.97
    Extrusion Width: Auto

    Retraction Distance: 5.00 mm
    Extra Restart Distance: 0.00 mm
    Retraction Vertical Lift: 0.08 mm
    Retraction Speed: 5400.0 mm/min

    Wipe Distance: 5.00 mm

    Primary Layer Height: 0.2 mm
    Top Solid Layers: 8
    Bottom Solid Layers: 5
    Outline/Perimeter Shells: 2
    Outline Direction: Inside-Out

    First Layer Height: 90%
    First Layer Width: 100%
    First Layer Speed: 20%

    Use Skirt/Brim: Check
    Skirt Layers: 1
    Skirt Offset from Part: 6.00 mm
    Skirt Outlines: 5

    Internal Fill Pattern: Fast Honeycomb
    External Fill Patern: Rectilinear
    Interior Fill Percentage: 10%
    Outline Overlap: 22%
    Infill Extrusion Width: 100%
    Minimum Infill Length: 5.00 mm
    Combine Infill Every: 1 layers

    External Infill Angle Offsets: 45/-45 deg

    Generate Support Material: Check
    Support Infill Percentage: 15%
    Extra Inflation Distance: 1.00 mm
    Support Base Layers: 0
    Combine Support Every: 1 layers

    Dense Support Layers: 0
    Dense Infill Percentage: 70%

    Support Type: Normal
    Support Pillar Resolution: 5.00 mm
    Max Overhang Angle: 60 deg

    Horizontal Offset From Part: 0.50 mm
    Upper Vertical Separation Layers: 1
    Lower Vertical Separation Layers: 1

    Support Infill Angles: 45 deg

    Extruder 1 Temperature: 210
    Heated Bed: 60

    Increase fan speed for layers below: 45.0 sec
      Maximum Cooling fan speed: 50%
    Bridging fan speed override: 100%

    Default Printing Speed: 4800.0 mm/min
    Outline Underspeed: 50%
    Solid Infill Underspeed: 80%
    Support Structure Underspeed: 80%
    X/Y Axis Movement Speed: 10800.0 mm/min
    Z Axis Movemen Speed: 1002.0 mm/min

    Adjust printing speed for layers below: 15.0 sec 
      Allow speed reduction down to: 20%

    Unsupported area threshold: 20.0 sq m

    Slic3r printing recommendations:

    Layer height
      Layer height: 0.1 mm
      First layer height: 90%
    Vertical shells
      Perimeters: 2
    Horizontal shells
      Soid layers: 
                  Top: 8
                  Bottom: 5
      Detect thin walls: Check
      Detect bridging perimeters: Check
      Seam position: Random
      Fill desity: 20%
      Fill pattern: Honeycomb
      Top/bottom fill pattern: Rectilinear
    Reducing printing time
      Combine infill every: 1 layers
      Solid infill every: 0 layers
      Fill angle: 25 deg
      Solid infill threshold area: 0mm
      Loops: 2
      Distance from object: 6 mm
      Skirt height: 1 layers
      Minimum extrusion length: 4 mm
      Brim width: 10 mm
    Support material
      Generate support material: Check
      Overhang threshold: 45 deg
      Enforce support for the first: 3 layers
      Raft layers: 0 layers
    Options for support material and raft
      Contact Z distance: 0.1 mm
      Pattern: Rectilinear
      Patter spacing: 2 mm
      Pattern angle: 0 deg
      Interface layers: 2 layers
      Interface pattern spacing: 0.2 mm
    Speed for print moves
      Perimeters: 60 mm/s
      Small perimeters: 20 mm/s
      External perimeters: 20 mm/s
      Infill: 60 mm/s
      Solid infill: 60 mm/s
      Top solid infill: 30 mm/s
      Support material: 50 mm/s
      Support material interface: 100%
      Bridges: 30 mm/s
      Gap fill: 50 mm/s
    Speed for non-print moves
      Travel: 60 mm/s
      First layer speed: 30 mm/s
    Acceleration control
      Perimeters: 800 mm/s
      Infill: 1500 mm/s
      Bridge: 1000 mm/s
      First layer: 1000 mm/s
      Default: 1000 mm/s
      Max print speed: 100 mm/s
      Max volumetrix speed: 0 mm/s
    Extrusion width
      Default extrusion width: 0.42 mm
      First layer: 0.42 mm
      Perimeters: 0.42 mm
      External perimeters: 0.42 mm
      Infill: 0.42 mm
      Solid infill: 0.42 mm
      Top solid infill: 0.42 mm
      Support material: 0.42 mm
      Infill/Perimeters overlap: 20%
      Bridge flow ratio: 0.95
      XY Size Compensation: 0 mm
      Threds: 8
      Resolution: 0 mm


    comments powered by Disqus

    Similar items

    Browse more newly listed 3D printings