Make pre-order

Protoss Carrier 3D Printing Model | Assembly

average
cm: 35.6 w x 68.5 d x 44.6 h
in: 14.016 w x 26.969 d x 17.559 h

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

- 2 versions of Protoss Carrier STL files for FFF/FDM and DLP/SLA/SLS - files for both versions are available for download after the purchase

- STL files of high-poly Protoss Carrier 3D Model for 3D printing consist of 242 parts
- Sizes:
FFF/FDM: 446 mm tall, 356 mm wide, 685 mm deep
DLP/SLA/SLS: 223 mm tall, 178 mm wide, 342 mm deep

Assembly Manual for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format
- Detailed settings that we provide as a recommendation for Cura, Simplify3D and Slic3r for the best print
- Full technical support from the Gambody Support Team

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
_1_platform_a_FDM (repair ed).stl
8.06 MiB 38 h 10 min
28 m
155 x 124 x 157 Download
_2_platform_b_FDM (repair ed).stl
5.03 MiB 12 h 3 min
7 m
146 x 37 x 136 Download
_3_platform_c_FDM (repair ed).stl
5.77 MiB 12 h 39 min
7 m
186 x 37 x 125 Download
_4_platform_d_FDM (repair ed).stl
6.18 MiB 22 h 43 min
14 m
129 x 123 x 139 Download
_5_platform_e_FDM (repair ed).stl
8.67 MiB 42 h 46 min
31 m
Download
_6_platform_f_FDM (repair ed).stl
6.37 MiB 17 h 59 min
11 m
Download
_7_platform_g_FDM (repair ed).stl
10.46 MiB 44 h 15 min
34 m
Download
_8_platform_h_FDM (repair ed).stl
1.76 MiB 50 h 10 min
46 m
Download
_9_platform_i_FDM (repair ed).stl
4.50 MiB 33 h 40 min
28 m
Download
_10_platform_window_a_FDM (repaired).stl
0.19 MiB 3 h 6 min
2 m
136 x 176 x 2 Download
_11_platform_window_b_FDM (repaired).stl
0.14 MiB 2 h 47 min
2 m
143 x 124 x 2 Download
_12_platform_window_c_FDM (repaired).stl
0.06 MiB 16 min
<1 m
29 x 29 x 2 Download
_13_portal_a_FDM (repaire d).stl
3.26 MiB 26 h 46 min
18 m
Download
_14_portal_b_FDM (repaire d).stl
24.62 MiB 15 h 7 min
9 m
Download
_15_portal_window_FDM (re paired).stl
1.06 MiB 4 h 22 min
2 m
102 x 102 x 27 Download
_16_portal_gear_x4_FDM (r epaired).stl
0.33 MiB 43 min
<1 m
16 x 16 x 18 Download
_17_portal_pin_x4_FDM (re paired).stl
0.20 MiB 6 min
<1 m
24 x 24 x 4 Download
_18_side_panel_a_R_FDM (r epaired).stl
16.33 MiB 26 h 36 min
20 m
Download
_19_side_panel_b_R_FDM (r epaired).stl
0.93 MiB 1 h 31 min
1 m
Download
_20_side_panel_window_a_R _FDM (repaired).stl
1.36 MiB 24 min
<1 m
7 x 39 x 25 Download
_21_side_panel_window_b_R _FDM (repaired).stl
0.09 MiB 3 min
<1 m
18 x 34 x 1 Download
_22_side_panel_window_c_R _FDM (repaired).stl
1.36 MiB 24 min
<1 m
7 x 39 x 25 Download
_23_side_panel_a_L_FDM (r epaired).stl
16.33 MiB 26 h 43 min
20 m
Download
_24_side_panel_b_L_FDM (r epaired).stl
0.93 MiB 1 h 31 min
1 m
30 x 46 x 14 Download
_25_side_panel_window_a_L _FDM (repaired).stl
1.36 MiB 25 min
<1 m
7 x 39 x 25 Download
_26_side_panel_window_b_L _FDM (repaired).stl
0.09 MiB 3 min
<1 m
18 x 34 x 1 Download
_27_side_panel_window_c_L _FDM (repaired).stl
1.36 MiB 24 min
<1 m
7 x 39 x 25 Download
_28_top_panel_a_FDM (repa ired).stl
14.70 MiB 34 h 53 min
27 m
Download
_29_top_panel_b_FDM (repa ired).stl
13.06 MiB 20 h 13 min
12 m
Download
_30_top_panel_c_R_FDM (re paired).stl
3.75 MiB 4 h 12 min
2 m
92 x 28 x 120 Download
_31_top_panel_d_R_FDM (re paired).stl
0.34 MiB 48 min
<1 m
28 x 30 x 11 Download
_32_top_panel_c_L_FDM (re paired).stl
3.75 MiB 4 h 23 min
2 m
Download
_33_top_panel_d_L_FDM (re paired).stl
0.34 MiB 49 min
<1 m
Download
_34_top_panel_window_a_R_ FDM (repaired).stl
0.09 MiB 3 min
<1 m
19 x 19 x 1 Download
_35_top_panel_window_b_R_ FDM (repaired).stl
0.43 MiB 6 min
<1 m
17 x 20 x 2 Download
_36_top_panel_window_a_L_ FDM (repaired).stl
0.09 MiB 3 min
<1 m
Download
_37_top_panel_window_b_L_ FDM (repaired).stl
0.43 MiB 6 min
<1 m
Download
_38_center_panel_a_R_FDM (repaired).stl
10.43 MiB 4 h 5 min
2 m
Download
_39_center_panel_b_1_R_FD M (repaired).stl
4.85 MiB 3 h 54 min
2 m
Download
_40_center_panel_b_2_R_FD M (repaired).stl
3.71 MiB 2 h 24 min
1 m
32 x 41 x 108 Download
_41_center_panel_a_L_FDM (repaired).stl
10.43 MiB 4 h 8 min
2 m
Download
_42_center_panel_b_1_L_FD M (repaired).stl
4.85 MiB 3 h 54 min
2 m
Download
_43_center_panel_b_2_L_FD M (repaired).stl
3.71 MiB 2 h 24 min
1 m
Download
_44_turbine_1_center_FDM (repaired).stl
12.42 MiB 34 h 41 min
26 m
Download
_45_turbine_2_center_FDM (repaired).stl
12.42 MiB 34 h
26 m
Download
_46_turbine_center_cap_1_ FDM (repaired).stl
0.33 MiB 8 h 47 min
5 m
Download
_47_turbine_center_cap_2_ FDM (repaired).stl
0.30 MiB 9 h 15 min
6 m
56 x 162 x 52 Download
_48_turbine_1_R_FDM (repa ired).stl
12.42 MiB 12 h 46 min
9 m
39 x 97 x 63 Download
_49_turbine_2_R_FDM (repa ired).stl
12.41 MiB 12 h 4 min
9 m
39 x 107 x 63 Download
_50_turbine_cap_1_R_FDM ( repaired).stl
0.33 MiB 3 h 41 min
2 m
37 x 98 x 49 Download
_51_turbine_cap_2_R_FDM ( repaired).stl
0.32 MiB 3 h 49 min
2 m
38 x 108 x 49 Download
_52_turbine_1_L_FDM (repa ired).stl
12.42 MiB 12 h 44 min
9 m
39 x 97 x 63 Download
_53_turbine_2_L_FDM (repa ired).stl
12.41 MiB 12 h 11 min
9 m
39 x 107 x 63 Download
_54_turbine_cap_1_L_FDM ( repaired).stl
0.33 MiB 3 h 42 min
2 m
38 x 98 x 49 Download
_55_turbine_cap_2_L_FDM ( repaired).stl
0.32 MiB 3 h 48 min
2 m
37 x 108 x 49 Download
_56_main_top_1_R_FDM (rep aired).stl
9.15 MiB 22 h 56 min
14 m
83 x 84 x 142 Download
_57_main_top_2_R_FDM (rep aired).stl
9.29 MiB 16 h 6 min
9 m
82 x 62 x 146 Download
_58_main_top_3_R_FDM (rep aired).stl
11.79 MiB 21 h 41 min
12 m
113 x 85 x 164 Download
_59_main_top_window_R_FDM (repaired).stl
0.86 MiB 22 min
<1 m
96 x 83 x 10 Download
_60_main_top_1_L_FDM (rep aired).stl
9.15 MiB 23 h 13 min
15 m
Download
_61_main_top_2_L_FDM (rep aired).stl
9.29 MiB 16 h 21 min
9 m
82 x 62 x 146 Download
_62_main_top_3_L_FDM (rep aired).stl
11.78 MiB 21 h 42 min
13 m
113 x 85 x 164 Download
_63_main_top_window_L_FDM (repaired).stl
0.87 MiB 22 min
<1 m
96 x 83 x 11 Download
_64_main_bot_1_R_FDM (rep aired).stl
9.15 MiB 22 h 44 min
14 m
83 x 84 x 142 Download
_65_main_bot_2_R_FDM (rep aired).stl
9.29 MiB 16 h 7 min
9 m
82 x 62 x 146 Download
_66_main_bot_3_R_FDM (rep aired).stl
11.78 MiB 21 h 20 min
12 m
113 x 85 x 164 Download
_67_main_bot_window_R_FDM (repaired).stl
0.86 MiB 22 min
<1 m
96 x 83 x 10 Download
_68_main_bot_1_L_FDM (rep aired).stl
9.15 MiB 22 h 35 min
14 m
83 x 84 x 142 Download
_69_main_bot_2_L_FDM (rep aired).stl
9.29 MiB 16 h 20 min
9 m
82 x 62 x 146 Download
_70_main_bot_3_L_FDM (rep aired).stl
11.78 MiB 21 h 16 min
12 m
113 x 85 x 164 Download
_71_main_bot_window_L_FDM (repaired).stl
0.87 MiB 22 min
<1 m
96 x 82 x 11 Download
_72_back_1_R_FDM (repaire d).stl
9.29 MiB 25 h 9 min
18 m
125 x 132 x 57 Download
_73_back_2_R_FDM (repaire d).stl
7.14 MiB 11 h 13 min
7 m
54 x 77 x 140 Download
_74_back_3_R_FDM (repaire d).stl
1.22 MiB 3 h 37 min
2 m
68 x 44 x 19 Download
_75_back_window_1_R_FDM ( repaired).stl
0.01 MiB 27 min
<1 m
32 x 50 x 2 Download
_76_back_window_2_R_FDM ( repaired).stl
0.09 MiB 6 min
<1 m
49 x 27 x 1 Download
_77_back_1_L_FDM (repaire d).stl
9.29 MiB 25 h 17 min
18 m
125 x 132 x 57 Download
_78_back_2_L_FDM (repaire d).stl
7.14 MiB 11 h 19 min
7 m
54 x 77 x 140 Download
_79_back_3_L_FDM (repaire d).stl
1.21 MiB 3 h 37 min
2 m
68 x 44 x 19 Download
_80_back_window_1_L_FDM ( repaired).stl
0.01 MiB 27 min
<1 m
32 x 50 x 2 Download
_81_back_window_2_L_FDM ( repaired).stl
0.09 MiB 6 min
<1 m
49 x 27 x 1 Download
_82_out_top_1_R_FDM (repa ired).stl
9.01 MiB 9 h 3 min
5 m
46 x 81 x 133 Download
_83_out_top_2_R_FDM (repa ired).stl
11.38 MiB 14 h 19 min
8 m
48 x 80 x 163 Download
_84_out_top_3_R_FDM (repa ired).stl
5.01 MiB 5 h 49 min
3 m
42 x 44 x 134 Download
_85_out_top_4_R_FDM (repa ired).stl
0.34 MiB 1 h 8 min
1 m
35 x 32 x 12 Download
_86_out_top_window_1_R_FD M (repaired).stl
0.09 MiB 4 min
<1 m
22 x 22 x 1 Download
_87_out_top_window_2_R_FD M (repaired).stl
1.54 MiB 40 min
<1 m
39 x 55 x 37 Download
_88_out_top_window_3_R_FD M (repaired).stl
0.55 MiB 12 min
<1 m
38 x 44 x 11 Download
_89_out_top_window_4_R_FD M (repaired).stl
0.32 MiB 7 min
<1 m
21 x 21 x 7 Download
_90_out_top_1_L_FDM (repa ired).stl
9.01 MiB 9 h 2 min
5 m
46 x 81 x 133 Download
_91_out_top_2_L_FDM (repa ired).stl
11.38 MiB 14 h 25 min
8 m
48 x 80 x 163 Download
_92_out_top_3_L_FDM (repa ired).stl
5.01 MiB 5 h 36 min
3 m
42 x 44 x 134 Download
_93_out_top_4_L_FDM (repa ired).stl
0.34 MiB 1 h 8 min
1 m
35 x 32 x 12 Download
_94_out_top_window_1_L_FD M (repaired).stl
0.09 MiB 4 min
<1 m
22 x 22 x 1 Download
_95_out_top_window_2_L_FD M (repaired).stl
1.53 MiB 40 min
<1 m
39 x 55 x 37 Download
_96_out_top_window_3_L_FD M (repaired).stl
0.55 MiB 12 min
<1 m
38 x 44 x 11 Download
_97_out_top_window_4_L_FD M (repaired).stl
0.32 MiB 7 min
<1 m
21 x 22 x 7 Download
_98_out_bot_1_R_FDM (repa ired).stl
9.01 MiB 9 h 1 min
5 m
46 x 81 x 133 Download
_99_out_bot_2_R_FDM (repa ired).stl
11.38 MiB 14 h 11 min
8 m
48 x 80 x 163 Download
_100_out_bot_3_R_FDM (rep aired).stl
5.01 MiB 5 h 49 min
3 m
42 x 44 x 134 Download
_101_out_bot_4_R_FDM (rep aired).stl
0.34 MiB 1 h 8 min
1 m
35 x 32 x 12 Download
_102_out_bot_window_1_R_F DM (repaired).stl
0.09 MiB 4 min
<1 m
22 x 22 x 1 Download
_103_out_bot_window_2_R_F DM (repaired).stl
1.53 MiB 40 min
<1 m
38 x 55 x 37 Download
_104_out_bot_window_3_R_F DM (repaired).stl
0.55 MiB 12 min
<1 m
38 x 44 x 11 Download
_105_out_bot_window_4_R_F DM (repaired).stl
0.32 MiB 7 min
<1 m
14 x 26 x 7 Download
_106_out_bot_1_L_FDM (rep aired).stl
9.01 MiB 9 h 3 min
5 m
46 x 81 x 133 Download
_107_out_bot_2_L_FDM (rep aired).stl
11.38 MiB 14 h 25 min
8 m
48 x 80 x 163 Download
_108_out_bot_3_L_FDM (rep aired).stl
5.01 MiB 5 h 25 min
3 m
42 x 44 x 134 Download
_109_out_bot_4_L_FDM (rep aired).stl
0.34 MiB 1 h 7 min
1 m
35 x 32 x 12 Download
_110_out_bot_window_1_L_F DM (repaired).stl
0.09 MiB 4 min
<1 m
22 x 22 x 1 Download
_111_out_bot_window_2_L_F DM (repaired).stl
1.53 MiB 39 min
<1 m
39 x 55 x 37 Download
_112_out_bot_window_3_L_F DM (repaired).stl
0.55 MiB 15 min
<1 m
31 x 48 x 14 Download
_113_out_bot_window_4_L_F DM (repaired).stl
0.32 MiB 7 min
<1 m
14 x 26 x 7 Download
_114_body_top_R_FDM (repa ired).stl
4.42 MiB 62 h 26 min
50 m
139 x 182 x 110 Download
_115_body_bot_R_FDM (repa ired).stl
3.68 MiB 65 h 4 min
53 m
139 x 182 x 110 Download
_116_body_top_L_FDM (repa ired).stl
4.42 MiB 62 h 28 min
50 m
139 x 182 x 110 Download
_117_body_bot_L_FDM (repa ired).stl
3.69 MiB 64 h 49 min
53 m
139 x 182 x 110 Download
_118_body_cap_FDM (repair ed).stl
11.29 MiB 7 h 55 min
4 m
150 x 158 x 30 Download
_119_body_drone_beam_FDM (repaired).stl
0.25 MiB 1 h 4 min
1 m
7 x 170 x 11 Download
_120_drone_x4_FDM (repair ed).stl
6.21 MiB 1 h 47 min
1 m
59 x 14 x 32 Download
_121_Ge_lock_10H_x139_FDM (repaired).stl
0.03 MiB 4 min
<1 m
10 x 18 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min
1 m
150 x 18 x 5 Download

ABOUT THIS 3D MODEL

Powerful and enigmatic Protoss are known for their psionic abilities, inflexible core philosophies, and, of course, the extremely advanced technology. One of the bright examples of Protoss’ gilded machines is their heavy air unit, the supership Carrier. Designed with curved and bulbous shapes, the Carrier is made of high-density alloys that are subject to a complex surface treatment and protected by powerful plasma shields that were meticulously developed by Khalai engineers.

Similar to Khalai craftsmen, our contributing 3D artist ventured into modelling the powerful warship of the Protoss arsenal and the incredible result can’t wait to join your 3D printing fleet! The model is pierced with a variety of intricate patterns and fine details while its dragon fruit-shaped silhouette comprises an orchestrated composition of thick curved plates. Carries never engage the enemy directly - they release an arsenal of deadly drone weapons commonly known as Interceptors. The 3D printing model of Protoss Carrier is also armed with four swift Interceptors that are ready to be launched through the in-built portal!

ADAPTATION FOR 3D PRINTING

Protoss Carrier for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 44 hours in total. For you to receive the cleanest 3D printing result possible and to minimize the amount of filament needed for generated support the spacecraft model was divided into many assembly parts, e.g. its four interceptors, thrusters, wings, the ”portal”, “fins”, various plates, etc. are provided as separate STL files. Also, special tunnels throughout the ship were prepared for you to light up the capital ship.

All assembly parts are provided in STL files of FFF/FDM version in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly video” and "Assembly Manual" before getting down to the Protoss Carrier model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the length of the Protoss Carrier which is 1370000 mm. The 3D printing model's chosen scale is 1:2000 for the FFF/FDM version and 1:4000 for the DLP/SLA/SLS version.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 121 parts;
- A printed ship is 446 mm tall, 356 mm wide, 685 mm deep;
- Assembly kit includes lock 121_Ge_lock_10H_x139 to connect parts securely without glue that needs to be printed 139 times;
Highly-detailed exterior of the craft with authentic patterns;
- Model is made hollow for you to introduce LED wiring and light up various "glass" elements all over the ship;
- A spot to hide the battery is provided inside the main body;
- Glass elements all over the ship and on the base were separated to be printed with transparent material;
- Portal, through which the Interceptors are released rotates via a ratchet mechanism;
- Made with a special platform with Khalai Caste logo that you can also light up;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA/SLS 1.0 version features:
- Contains 121 parts;
- A printed ship is 223 mm tall, 178 mm wide, 342 mm deep;
Highly-detailed exterior of the craft with authentic patterns;
- Model is made hollow for you to introduce LED wiring and light up various "glass" elements all over the ship;
- A spot to hide the battery is provided inside the main body;
- Glass elements all over the ship and on the base were separated to be printed with transparent material;
- Portal, through which the Interceptors are released rotates via a ratchet mechanism;
- Made with a special platform with Khalai Caste logo that you can also light up;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

You can get the model of Protoss Carrier for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Protoss Carrier 3D Printing Model at Gambody YouTube channel.

Also, you may like other StarCraft Models for 3D Printing, as well as other Space Ships 3D Printing Models.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

Note:
- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Quality
Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill 
Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Material 
Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at support@gambody.com)

Speed 

You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Travel 
Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings