Premium Stock

Space Godzilla 3D Printing Figurine | Assembly

cm: 40.3 w x 57.8 d x 51.3 h
in: 15.866 w x 22.756 d x 20.197 h

Source Files




Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Space Godzilla 3D Printing Figurine comes in 5 versions for each 3D printer type (FDM/FFF, DLP/SLA, and SLS). Files for each version are available for download after the purchase.

Detailed information about this model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_Head (repaired)_FDM.stl
5.80 MiB 22 h 60 min 14 m 67 x 93 x 118 Download
2_Ge_lock_10S_(x52) (repa ired)_FDM.stl
0.03 MiB 4 min <1 m 10 x 18 x 2 Download
3_Body (repaired)_FDM.stl
18.48 MiB 177 h 6 min 108 m 204 x 183 x 196 Download
4_Crystal_body_R (repaire d)_FDM.stl
5.65 MiB 28 h 41 min 19 m 117 x 90 x 151 Download
5_Crystal_body_Top (repai red)_FDM.stl
4.95 MiB 12 h 13 min 8 m 54 x 88 x 91 Download
6_Crystal_body_L (repaire d)_FDM.stl
6.64 MiB 35 h 52 min 24 m 123 x 88 x 167 Download
7_Crystal_body_Middle (re paired)_FDM.stl
13.41 MiB 106 h 42 min 68 m 247 x 257 x 136 Download
8_Tail_3 (repaired)_FDM.s tl
8.05 MiB 65 h 37 min 51 m 120 x 118 x 204 Download
9_Tail_2 (repaired)_FDM.s tl
9.29 MiB 53 h 38 min 33 m 76 x 105 x 207 Download
10_Tail_1 (repaired)_FDM. stl
14.23 MiB 101 h 9 min 61 m 114 x 119 x 234 Download
11_Pelvis (repaired)_FDM. stl
18.48 MiB 181 h 19 min 114 m 132 x 205 x 254 Download
12_Crystal_body_Bottom (r epaired)_FDM.stl
8.68 MiB 23 h 17 min 14 m 69 x 189 x 98 Download
13_Leg_R (repaired)_FDM.s tl
13.15 MiB 94 h 14 min 60 m 152 x 135 x 239 Download
14_Leg_L (repaired)_FDM.s tl
12.85 MiB 87 h 35 min 56 m 151 x 128 x 237 Download
15_Platform_1 (repaired)_ FDM.stl
3.18 MiB 66 h 29 min 39 m 202 x 202 x 53 Download
16_Platform_2 (repaired)_ FDM.stl
2.41 MiB 69 h 9 min 41 m 202 x 202 x 67 Download
17_Platform_3 (repaired)_ FDM.stl
2.44 MiB 63 h 6 min 37 m 202 x 202 x 46 Download
18_Platform_4 (repaired)_ FDM.stl
2.33 MiB 64 h 4 min 38 m 202 x 202 x 35 Download
19_Platform (repaired)_FD M.stl
9.75 MiB 270 h 28 min 155 m 403 x 403 x 67 Download


Space Godzilla is one of the most evil monsters in a series of films about Godzilla. Unlike some monsters that cause destruction only because of their size or because they are controlled, Space Godzilla appears on Earth, motivated only by a selfish desire and hatred and desire to kill Godzilla and conquer the Earth. Space Godzilla demonstrated that he was ready to harm a helpless child when he attacked Godzilla's son, Little Godzilla, to bring Godzilla, and then put him in a crystal prison to mock Godzilla. Space Godzilla also demonstrated an outstanding intellect. Space Godzilla is considered even more intelligent than people and uses different tactics in the battle. Space Godzilla used Godzilla's emotional attachment to her son to attack. Despite his impressive intellect, Space Godzilla is devoid of any emotions other than anger, and for unknown reasons has a strong hatred for Godzilla. Even after Godzilla helped KosmoGodzilla defeat the Trilopods, Space Godzilla turned the weakened Godzilla, knocking him when he lay unconscious on the ground and growled fiercely.


This model have an update that include new FFF/FDM 1.1 version. The updated version has got a new cutting. The body, crystals, arms, legs, the tail and the platform of the 3D printing figurine are cut in smaller parts so the printing process will be much more convenient, especially on the printer with small buildplates.The model is saved in STL files, a format supported by most 3D printers

FFF/FDM 1.0 version features:
- Contain 19 parts;
- Made with Locks for better fixing. One part of Lock (2_Ge_lock_10S_(x52)) you need to print 52 times.
- Made with 2 variants of the platform. Divided into 4 pieces and Solid for different sizes of buildplates;

FFF/FDM 1.1 version features:
- Contain 33 parts;
- Made with Locks for better fixing. One part of Lock (10_Ge_lock_10S_(x85)) you need to print 85 times.
- Made with 2 variants of the platform. Divided into 9 pieces and Solid for different sizes of buildplates;
- All parts are divided in such way that you will print them with the smallest amount of supports.

DLP/SLA 1.0 version features:
- Same as FDM but smaller, also made as 18 parts;

DLP/SLA Pre-supported 1.0 version features:
- Contains 18 parts;
- A printed model is 257 mm tall, 202 mm wide, 289 mm deep;
- The STL files that this version comprises are pre-supportedhollowed out, and have drain holes where needed;
- You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate;
- When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact.

SLS 1.0 version features:
- Same as SLA but made as 2 parts for economy your material;

All STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for CURA 3.3.1. Software.

There are 19 parts for FFF/FDM 1.0 version, 33 parts for FFF/FDM 1.1 version, 18 parts for SLA 1.0 version and 2 parts for SLS 1.0.

Scale: Its height is 120000 mm. The scale of this model made in proportion to it. 1/250 for FDM version and 1/500 for DLP/SLA/SLS version.

FDM version dimensions:
After being printed will stand - 513 mm tall, 403 mm wide, 578 mm deep;

SLS/DLP/​SLA version dimensions:
After being printed will stand - 257 mm tall, 202 mm wide, 289 mm deep;
- Has a few details, to keep printing costs down.


- STL files of Space Godzilla 3D Figurine for 3D printing which consist of 90 parts;
- 5 versions of files for this model for FFF/FDM 1.0, FFF/FDM 1.1, DLP/SLA and for SLS 3D printers;
- Made with platform;
- Model fixed by the Locks;
- High-poly detailed model of Space Godzilla​;
- Detailed settings that we provide for Cura 3.3.1. and Simplify3D for the best print;
- Full technical support from the Gambody Support Team.

Watch the tutorial video on how to assemble Space Godzilla 3D Printing Figurine at Gambody YouTube channel.

You can get Model of Space Godzilla for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Also, you may like other Villains 3D Printing Figurines.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?


This model was tested in Cura 3.3.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for Cura and Simplify3D softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s

Print Speed: 45 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
Travel Speed: 60 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 1.3333 mm
Support Z Distance: 0.3 mm
    Support Top Distance: 0.3 mm
    Support Bottom Distance: 0.3 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m


comments powered by Disqus

Similar items

Browse more newly listed 3D printings