Premium Stock

Wipeout Piranha

cm: 25 w x 7 d x 15 h
in: 9.843 w x 2.756 d x 5.906 h

Source Files




Printing Details

STL files and the cutting of this model are preserved as created by the Author. This model was not moderated by Gambody, it is not subject to technical support by Gambody, and we do not offer any guarantees on the 3D printing results.

Stock models can only be purchased in an order separate from the Premium STL files by Gambody. If a Premium model is added to the Cart, the Stock models are deleted automatically, and vice versa.

You can read more about Stock models on Gambody's Blog.

The Author of the Stock model can provide technical support if they wish. All your questions, requests, wishes and remarks can be left in the comment section below.

Gambody Team can consider providing a Premium version of the model if highly requested.

File Name File Size Time / Filament Object Size
(x/y/z mm)
air break L (repaired).st l
0.70 MiB 9 min <1 m 13 x 4 x 9 Download
air break R (repaired).st l
0.70 MiB 8 min <1 m 13 x 4 x 9 Download
canopy (repaired).stl
5.92 MiB 2 h 2 min 1 m 64 x 13 x 32 Download
wing2R (repaired).stl
18.09 MiB 56 min <1 m 38 x 11 x 44 Download
wing2L (repaired).stl
18.14 MiB 56 min <1 m 38 x 11 x 44 Download
hull3 (repaired).stl
25.46 MiB 8 h 16 min 5 m 83 x 38 x 64 Download
engine2 (repaired).stl
30.14 MiB 8 h 8 min 4 m 74 x 41 x 45 Download
hull1 (repaired).stl
31.77 MiB 5 h 38 min 4 m 76 x 33 x 45 Download
wing1R (repaired).stl
39.90 MiB 1 h 28 min 1 m 28 x 16 x 44 Download
wing1L (repaired).stl
40.07 MiB 1 h 30 min 1 m 28 x 16 x 44 Download
hull2 (repaired).stl
40.96 MiB 9 h 8 min 5 m 90 x 39 x 63 Download

Here is the latest item to complete the Wipeout Classic series.


15 parts to assemble easily

Parts are optimized for FDM printing with vertical placement.

Resin printing recommended for an impeccable result.

As in previous Wipeout models, it is possible to display the aircraft without the fairing, to show all the mechanical parts.

By printing more hulls you can change liveries without reprinting the whole shuttle.

Simplify 3D

Materials: Resin, PLA, Resin other..


Infill: 30%

Supports: Yes, only from the base of the printing plate

Follow the instructions provided


comments powered by Disqus

Similar items

Browse more newly listed 3D printings