Godzilla Extreme 3D Printing Figurine | Assembly

cm: 44.2 w x 39.4 d x 39.4 h
in: 17.402 w x 15.512 d x 15.512 h

Source Files




Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Godzilla Extreme 3D Printing Figurine comes in 3 versions for each 3D printer type (FDM/FFF, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_Platform_1_SLA (repaire d).stl
2.38 MiB 10 h 53 min 6 m 107 x 101 x 33 Download
2_Platform_2_SLA (repaire d).stl
2.42 MiB 9 h 53 min 6 m 101 x 107 x 23 Download
3_Platform_3_SLA (repaire d).stl
3.18 MiB 10 h 32 min 6 m 101 x 107 x 26 Download
4_Platform_4_SLA (repaire d).stl
2.32 MiB 9 h 56 min 6 m 107 x 101 x 18 Download
5_Platform_SLA (repaired) .stl
9.77 MiB 38 h 55 min 22 m 202 x 202 x 34 Download
6_Tail_6_SLA (repaired).s tl
2.84 MiB 1 h 9 min <1 m 45 x 20 x 66 Download
7_Tail_5_SLA (repaired).s tl
3.93 MiB 1 h 51 min 1 m 41 x 45 x 42 Download
8_Tail_4_SLA (repaired).s tl
5.69 MiB 2 h 6 min 1 m 34 x 57 x 28 Download
9_Tail_3_SLA (repaired).s tl
10.30 MiB 4 h 7 min 2 m 26 x 78 x 37 Download
10_Tail_2_SLA (repaired). stl
17.63 MiB 7 h 21 min 4 m 90 x 60 x 42 Download
11_Tail_1_SLA (repaired). stl
22.27 MiB 14 h 19 min 8 m 70 x 89 x 71 Download
12_Pelvis_SLA (repaired). stl
29.32 MiB 22 h 56 min 14 m 50 x 87 x 115 Download
13_Leg_R_SLA (repaired).s tl
14.98 MiB 10 h 58 min 7 m 63 x 68 x 114 Download
14_Leg_L_SLA (repaired).s tl
17.88 MiB 11 h 2 min 7 m 65 x 55 x 114 Download
15_Body_SLA (repaired).st l
21.15 MiB 14 h 31 min 9 m 69 x 78 x 85 Download
16_Thorns_2_SLA (repaired ).stl
2.93 MiB 47 min <1 m 11 x 34 x 38 Download
17_Thorns_1_SLA (repaired ).stl
3.24 MiB 58 min <1 m 16 x 38 x 47 Download
18_Arm_R_SLA (repaired).s tl
6.96 MiB 5 h 2 min 4 m 117 x 45 x 126 Download
19_Arm_L_SLA (repaired).s tl
7.30 MiB 3 h 20 min 2 m 29 x 30 x 81 Download


The extreme concept of Godzilla, made by Dope Pope from the artwork of Bracey 100. Formed from several reptile types, it is a new redesigned kaiju in the Godzilla Neo vein. This monster is called Kiryu. In 2003, Kiryu had its massive final battle with Godzilla 3 in the streets of Tokyo. When the battle came to its end, Kiryu’s DNA computer reawoke its instincts as the former King of the Monsters, GODZILLA 1. The giant cyborg carried Godzilla out into the ocean, and the two plummeted into the Japan Trench, where the younger monster stayed at the bottom of the sea, allowed to heal from the battle. Kiryu, having absorbed much of Godzilla’s atomic heat ray, shut down its circuitry, and began to change. The techno-organic heart in its chassis was beginning to mutate and fuse with the skeleton in its frame expelling inorganic material, growing new nervous systems, new muscles, new organs and a new brain.


The model is saved in STL files, a format supported by most 3D printers

FFF/FDM 1.0 version features:
- Contain 36 parts;
- Made with Locks for better fixing. One part of Lock (6_Ge_lock_10H_(X71)) you need to print 71 times.
- Made with 2 variants of the platform. Divided and Solid for different sizes of buildplates;
- All parts are divided in such way that you will print them with the smallest amount of supports.

DLP/SLA 1.0 version features:
- Same as FDM but smaller, also made as 19 parts;

SLS 1.0 version features:
- Same as SLA but made as 2 parts for economy your material;

All STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for CURA 3.4.1. or Simplify3D Software.

There are 36 parts for FFF/FDM 1.0 version, 19 parts for DLP/SLA 1.0 version and 2 parts for SLS 1.0.

Scale: Godzille Extreme height is 91000 mm. The scale of this model made in proportion to it. 1/250 for FDM version and 1/500 for SLA/SLS version.

FFF/FDM version dimensions:
After being printed will stand - 394 mm tall, 442 mm wide, 394 mm deep;

DLP/SLA/​SLS version dimensions:
After being printed will stand - 197 mm tall, 221 mm wide, 197 mm deep;
- Has a few details, to keep printing costs down.


- STL files of Godzilla Extreme​ 3D Figurine for 3D printing which consist of 57 parts;
- 3 versions of files for this model for FFF/FDM, DLP/SLA, and SLS;
- High-poly detailed figurine of Godzilla Extreme​;
- Detailed settings that we provide for Cura 3.4.1. and Simplify3D for the best print;
- Full technical support from the Gambody Support Team.

You can get Model of Godzilla Extreme​ for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial video on how to assemble Godzilla Extreme​ 3D Printing Figurine at Gambody YouTube channel.

Also, you may like other Kaiju 3D Printing Figurines.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.4.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for Cura and Simplify3D softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Print Speed: 45 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
    Support Speed: 45 mm/s 
     Support Infill Speed: 45 mm/s
Travel Speed: 60 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.6562 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 1.3333 mm
Support Z Distance: 0.3 mm
    Support Top Distance: 0.3 mm
    Support Bottom Distance: 0.3 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m


comments powered by Disqus

Similar items