Premium Stock

The Mandalorian 3D Printing Figurine | Assembly

cm: 20.9 w x 16 d x 25.5 h
in: 8.228 w x 6.299 d x 10.039 h

Source Files




Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

The Mandalorian 3D Printing Figurine comes in 5 versions for each 3D printer type (FFF/FDM, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing figurine is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
55.79 MiB 10 h 48 min 6 m 61 x 56 x 92 Download
4_arm_R_1_FDM(repaired).s tl
24.13 MiB 1 h 9 min 1 m 38 x 25 x 24 Download
5_arm_R_2_FDM(repaired).s tl
29.78 MiB 1 h 16 min 1 m 20 x 20 x 44 Download
6_hand_R_FDM(repaired).st l
32.33 MiB 1 h 17 min 1 m 15 x 24 x 66 Download
7_arm_L_1_FDM(repaired).s tl
16.98 MiB 1 h 8 min 1 m 38 x 26 x 24 Download
8_arm_L_2_FDM(repaired).s tl
32.44 MiB 1 h 20 min 1 m 21 x 35 x 41 Download
9_hand_L_FDM(repaired).st l
30.38 MiB 40 min <1 m 17 x 15 x 33 Download
10_foot_R_FDM(repaired).s tl
43.36 MiB 3 h 36 min 2 m 27 x 44 x 67 Download
11_foot_L_FDM(repaired).s tl
40.69 MiB 4 h 16 min 3 m 27 x 42 x 75 Download
12_scapular_R_FDM(repaire d).stl
24.52 MiB 56 min <1 m 29 x 28 x 19 Download
13_scapular_L_FDM(repaire d).stl
18.87 MiB 55 min 1 m 27 x 28 x 21 Download
14_armor_leg_R_FDM (repai red).stl
17.97 MiB 50 min <1 m 24 x 42 x 9 Download
15_armor_leg_L_FDM (repai red).stl
14.73 MiB 42 min <1 m 22 x 36 x 9 Download
16_pouch_1_FDM(repaired). stl
10.03 MiB 10 min <1 m 13 x 9 x 7 Download
17_pouch_2_FDM(repaired). stl
13.81 MiB 18 min <1 m 16 x 13 x 11 Download
18_pouch_3_FDM(repaired). stl
17.56 MiB 17 min <1 m 16 x 13 x 11 Download
19_belt_charges_FDM(repai red).stl
14.43 MiB 38 min <1 m 16 x 31 x 13 Download
21_bullets_1_FDM(repaired ).stl
15.37 MiB 10 min <1 m 11 x 9 x 9 Download
22_bullets_2_FDM(repaired ).stl
17.28 MiB 11 min <1 m 11 x 10 x 10 Download
23_bullets_3_FDM(repaired ).stl
17.40 MiB 11 min <1 m 10 x 11 x 10 Download
24_belt_loop_FDM(repaired ).stl
4.88 MiB 9 min <1 m 10 x 7 x 11 Download
25_bullet_1_FDM(repaired) .stl
8.84 MiB 8 min <1 m 6 x 11 x 9 Download
26_bullet_2_FDM(repaired) .stl
8.84 MiB 8 min <1 m 11 x 6 x 9 Download
27_bullet_3_FDM(repaired) .stl
8.82 MiB 7 min <1 m 11 x 6 x 9 Download
28_bullet_4_FDM(repaired) .stl
8.82 MiB 7 min <1 m 11 x 6 x 8 Download
29_bullet_5_FDM(repaired) .stl
8.83 MiB 7 min <1 m 6 x 11 x 8 Download
30_bullet_6_FDM(repaired) .stl
8.83 MiB 7 min <1 m 6 x 11 x 8 Download
31_bullet_7_FDM(repaired) .stl
8.78 MiB 7 min <1 m 11 x 6 x 8 Download
34_jetpack_FDM(repaired). stl
33.37 MiB 5 h 29 min 3 m 58 x 29 x 76 Download
35_blaster_rifle_1_FDM(re paired).stl
28.41 MiB 57 min <1 m 9 x 24 x 65 Download
36_blaster_rifle_2_FDM(re paired).stl
29.33 MiB 3 h 5 min 1 m 16 x 24 x 121 Download
37_blaster_rifle_3_FDM(re paired).stl
23.86 MiB 34 min <1 m 17 x 5 x 61 Download
38_baby_yoda_FDM(repaired ).stl
44.01 MiB 3 h 25 min 2 m 52 x 27 x 45 Download
39_bag_for_baby_yoda_FDM( repaired).stl
24.31 MiB 1 h 54 min 1 m 35 x 34 x 38 Download
40_bag_strap_1_FDM(repair ed).stl
13.56 MiB 1 h 19 min 1 m 106 x 20 x 19 Download
41_bag_strap_2_FDM(repair ed).stl
14.94 MiB 55 min 1 m 14 x 71 x 15 Download
42_platform_FDM(repaired) .stl
67.73 MiB 19 h 51 min 10 m 144 x 150 x 35 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min 1 m 150 x 18 x 5 Download
32_cloak_FDM(repaired).st l
45.24 MiB 39 h 41 min 30 m 141 x 140 x 147 Download
33_cloak_for_jetpack_FDM( repaired).stl
35.15 MiB 17 h 7 min 14 m 85 x 60 x 145 Download
32_v2_cloak_1_FDM(repaire d).stl
50.56 MiB 11 h 20 min 8 m 99 x 45 x 96 Download
32_v2_cloak_2_FDM(repaire d).stl
48.32 MiB 15 h 19 min 9 m 114 x 81 x 104 Download
42_v2_platorm_1_FDM(repai red).stl
25.79 MiB 4 h 27 min 2 m 92 x 75 x 17 Download
42_v2_platorm_2_FDM(repai red).stl
26.36 MiB 6 h 20 min 3 m 78 x 104 x 35 Download
42_v2_platorm_4_FDM(repai red).stl
25.81 MiB 3 h 49 min 2 m 66 x 104 x 16 Download
43_ge_lock_7S(x10) l
0.02 MiB 3 min <1 m 7 x 18 x 2 Download
42_v2_platorm_3_FDM(repai red).stl
23.79 MiB 6 h 48 min 4 m 121 x 75 x 25 Download
20_holster_FDM(repaired). stl
29.69 MiB 23 min <1 m 30 x 15 x 8 Download
59.47 MiB 9 h 19 min 6 m 59 x 49 x 68 Download
14_v2_armor_leg_R_smooth_ beskar_FDM (repaired).stl
35.12 MiB 50 min <1 m 24 x 42 x 9 Download
15_v2_armor_leg_L_smooth_ beskar_FDM (repaired).stl
29.85 MiB 42 min <1 m 22 x 36 x 9 Download
49.85 MiB 2 h 60 min 2 m 30 x 40 x 44 Download
12_v2_smooth_scapular_R_F DM(repaired).stl
26.53 MiB 54 min <1 m 29 x 28 x 19 Download
13_v2_smooth_scapular_L_F DM(repaired).stl
25.13 MiB 53 min 1 m 27 x 28 x 21 Download
2_v2_smooth_body_FDM(repa ired).stl
59.47 MiB 9 h 21 min 6 m 59 x 49 x 68 Download
1_v2_head_smooth_FDM(repa ired).stl
50.03 MiB 3 h 6 min 2 m 30 x 41 x 44 Download


Din Djarin, also known as “The Mandalorian” or “Mando” for short, is the reputed bounty hunter and the titular character of the well-loved TV series within the Star Wars franchise. The Mandalorian travels across the galaxy on his Razor Crest starship accompanying (and protecting) the Force-sensitive Child. The author of the incredible The Mandalorian 3D printing figurine spent almost 200 hours while working on the stunning bounty hunter project. And the hard work clearly yielded the astonishing result - the lone gunfighter for 3D printing is exceptionally detailed, mysterious and so very cool! The pose that the 3D artist decided to go for resembles the one seen in various posters of the first season of The Mandalorian series. The protagonist of the space Western is captured midstep and there is absolutely no doubt that Din Djarin is extremely confident, super professional, and armed to the teeth. The author of the figurine made sure to properly depict the warrior’s set of Mandalorian armour, starting from the distinctive Beskar helmet with a T-shaped visor that fully conceals the hunter’s face. The design of the body armour also pays tribute to the traditional armour of the human warrior clans and includes shoulder pauldrons, vambraces, a breastplate, a codpiece, thigh, knee and shin guards. The mighty bounty hunter for 3D printing wields a blaster pistol and can be displayed carrying either the trademark Amban sniper rifle or the jetpack on his back. The careful attention to the model’s finest details makes the 3D printing project thousand times more appealing and realistic - just take a closer look at the clan Mudhorn signet on the figurine’s right shoulder, or at all kinds of pockets, bullets, cartridges, etc. adorning the bandolier or the boots of the character. Last but definitely not least feature that barely needs an introduction - the cutest Baby Yoda miniature nestled inside The Mandalorian’s bag! The Din Djarin 3D printing figurine is destined to hit the wishlists of SW fans, especially coupled with his Speeder Bike that comes as the second part of the diorama!


The Mandalorian figurine for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 58 hours in total. Figurine’s anatomy was thoroughly reviewed during the moderation process for the bounty hunter to be depicted harmoniously in the intended pose. The model’s cutting was chosen by our team to minimize the amount of filament needed for generated support and some of the parts were hollowed out for you to save resin in the model’s Eco version. In order to conceal the places where the assembly parts of the model must be connected, the figurine was cut along the contour of the character’s Mandalorian armor seams and both variants of the model’s cape were taken off the figurine. For you to achieve the cleanest result possible, many smaller parts such as The Mandalorian’s shoulder pauldrons, the beskar helmet, the Amban Sniper Rifle, the blaster pistol, the jetpack, various pockets, bandolier elements, cartridges, the Baby Yoda miniature, etc. are provided as separate files. In addition to that, the model’s cutting allows the interchangeability between The Mandalorian’s variants - the figurine can be displayed either wearing the jetpack on its back or wearing the Amban Sniper Rifle while carrying the Baby Yoda miniature inside the bag. The figurine can be assembled into a diorama with The Mandalorian’s Speeder Bike that has a special platform to house both models. All the assembly parts come in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and to make sure that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any figurine's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format.

The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from Din Djarin's actual height that is 1800 mm. The 3D printing figurine's chosen scale is 1/8 for the FFF/FDM version and 1/16 for the DLP/SLA/SLS versions.


FFF/FDM 1.0 version features:
- Contains 43 parts;
- A printed model is 255 mm tall, 209 mm wide, 160 mm deep;
- Assembly kit includes locks to attach the model's parts securely without glue. Lock 43_ge_lock_7S(x10) needs to be printed ten times;
- The Mandalorian can be assembled into a diorama with the Speeder Bike;
- Din Djarin can be displayed alone, with Baby Yoda in the bag, or wearing a jetpack;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 17 parts;
- A printed model is 128 mm tall, 105 mm wide, 80 mm deep;
- The Mandalorian can be assembled into a diorama with the Speeder Bike;
- Din Djarin can be displayed alone, with Baby Yoda in the bag, or wearing a jetpack;
- Contains an alternative cloak design by Ignacio Abad to assemble The Mandalorian figurine with the jetpack and Baby Yoda in the bag simultaneously;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:
- Contains 17 parts;
- A printed model is 128 mm tall, 105 mm wide, 80 mm deep;
- The Mandalorian can be assembled into a diorama with the Speeder Bike;
- Din Djarin can be displayed alone, with Baby Yoda in the bag, or wearing a jetpack;
- Contains some hollowed out parts to save resin.

DLP/SLA Pre-supported 1.0 version features:
- Contains 17 parts;
- A printed model is 128 mm tall, 105 mm wide, 80 mm deep;
- The STL files that this version comprises are pre-supportedhollowed out, and have drain holes where needed;
- You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate;
- When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact.

SLS 1.0 version features:
- Made as a solid one-piece figurine;
- A printed model is 128 mm tall, 105 mm wide, 80 mm deep;
- Contains 4 parts - solid Din Djarin figurines with/without Baby Yoda in the bag, a version with the jetpack, all are separated from the platform.


- STL files of The Mandalorian​ 3D Figurine for 3D printing which consist of 98 parts;
- 5 versions of files for this model for FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS;
- High-poly detailed figurine of The Mandalorian​;​​
Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format;
- Detailed settings that we provide as a recommendation for Cura, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the figurine of The Mandalorian for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble The Mandalorian​ 3D Printing Figurine at Gambody YouTube channel.

Also, you may like the Speeder Bike 3D Printing Model, as well as other Star Wars 3D Printing Models.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?


Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at


You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
  Detect thin walls: Check
  Detect bridging perimeters: Check
  Seam position: Random
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
  Infill/Perimeters overlap: 20%
  Bridge flow ratio: 0.95
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm


comments powered by Disqus

Similar items

Browse more newly listed 3D printings