Make pre-order

T-70 X-Wing 3D Printing Model | Assembly

(5)
big
cm: 32.3 w x 37.5 d x 11.4 h
in: 12.717 w x 14.764 d x 4.488 h
13
BUY FOR  $29.99

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

T-70 X-Wing 3D Printing Model comes in 4 versions for each 3D printer type (FFF/FDM, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament
1_hull_front_top_FDM (rep aired).stl
10.85 MiB 3 h 58 min
2 m
Download
2_hull_back_top_FDM (repa ired).stl
23.63 MiB 9 h 12 min
5 m
Download
3_hull_front_bot_FDM (rep aired).stl
11.61 MiB 4 h 50 min
3 m
Download
4_hull_back_bot_FDM (repa ired).stl
18.51 MiB 8 h 16 min
5 m
Download
5_nose_top_FDM (repaired) .stl
4.90 MiB 1 h 6 min
1 m
Download
6_nose_bot_FDM (repaired) .stl
3.62 MiB 1 h 14 min
1 m
Download
7_back_cap_FDM (repaired) .stl
9.82 MiB 1 h 20 min
1 m
Download
8_top_cap_FDM (repaired). stl
3.01 MiB 21 min
<1 m
Download
9_bb8_head_FDM (repaired) .stl
5.83 MiB 8 min
<1 m
Download
10_bb8_hull_1_FDM (repair ed).stl
6.25 MiB 10 min
<1 m
Download
11_bb8_hull_2_FDM (repair ed).stl
6.22 MiB 9 min
<1 m
Download
12_cockpit_FDM (repaired) .stl
10.24 MiB 3 h 7 min
2 m
Download
13_seat_FDM (repaired).st l
6.86 MiB 31 min
<1 m
Download
14_joystick_FDM (repaired ).stl
0.35 MiB 8 min
<1 m
Download
15_cabine_front_FDM (repa ired).stl
0.56 MiB 1 h 52 min
1 m
Download
16_cabine_back_FDM (repai red).stl
0.15 MiB 1 h 2 min
<1 m
Download
17_cabine_frame_front_FDM (repaired).stl
0.59 MiB 1 h 7 min
1 m
Download
18_cabine_frame_back_FDM (repaired).stl
0.16 MiB 54 min
<1 m
Download
19_landing_front_cap_FDM (repaired).stl
0.82 MiB 19 min
<1 m
Download
20_landing_front_1_FDM (r epaired).stl
1.15 MiB 1 h 9 min
1 m
Download
21_landing_front_2_FDM (r epaired).stl
0.03 MiB 22 min
<1 m
Download
22_landing_wing_1_R_FDM ( repaired).stl
1.15 MiB 1 h 10 min
1 m
Download
23_landing_wing_2_R_FDM ( repaired).stl
0.05 MiB 17 min
<1 m
Download
24_landing_wing_1_L_FDM ( repaired).stl
1.15 MiB 1 h 9 min
1 m
Download
25_landing_wing_2_L_FDM ( repaired).stl
0.05 MiB 17 min
<1 m
Download
26_sub_wing_top_R_FDM (re paired).stl
3.55 MiB 7 h 10 min
4 m
Download
27_sub_wing_panel_1_top_R _FDM (repaired).stl
0.57 MiB 13 min
<1 m
Download
28_sub_wing_panel_2_top_R _FDM (repaired).stl
0.21 MiB 11 min
<1 m
Download
29_sub_wing_panel_3_top_R _FDM (repaired).stl
0.64 MiB 48 min
<1 m
Download
30_sub_wing_panel_4_top_R _FDM (repaired).stl
0.04 MiB 6 min
<1 m
Download
31_sub_wing_panel_5_top_R _FDM (repaired).stl
0.04 MiB 3 min
<1 m
Download
32_sub_wing_turbine_front _top_R_FDM (repaired).stl
0.48 MiB 47 min
<1 m
Download
33_turbine_back_top_1_R_F DM (repaired).stl
1.64 MiB 1 h 40 min
1 m
Download
34_turbine_back_top_2_R_F DM (repaired).stl
0.28 MiB 8 min
<1 m
Download
35_wing_top_R_FDM (repair ed).stl
0.20 MiB 1 h 50 min
1 m
Download
36_gun_top_1_R_FDM (repai red).stl
0.21 MiB 51 min
<1 m
Download
37_gun_top_2_R_FDM (repai red).stl
0.20 MiB 27 min
<1 m
Download
38_gun_top_3_R_FDM (repai red).stl
0.47 MiB 1 h 21 min
1 m
Download
39_gun_top_4_R_FDM (repai red).stl
0.18 MiB 11 min
<1 m
Download
40_sub_wing_bot_R_FDM (re paired).stl
3.54 MiB 7 h 11 min
4 m
Download
41_sub_wing_landing_cap_b ot_R_FDM (repaired).stl
0.01 MiB 8 min
<1 m
Download
42_sub_wing_panel_1_bot_R _FDM (repaired).stl
0.57 MiB 13 min
<1 m
Download
43_sub_wing_panel_2_bot_R _FDM (repaired).stl
0.21 MiB 11 min
<1 m
Download
44_sub_wing_panel_3_bot_R _FDM (repaired).stl
0.64 MiB 48 min
<1 m
Download
45_sub_wing_panel_4_bot_R _FDM (repaired).stl
0.04 MiB 6 min
<1 m
Download
46_sub_wing_panel_5_bot_R _FDM (repaired).stl
0.04 MiB 3 min
<1 m
Download
47_sub_wing_turbine_front _bot_R_FDM (repaired).stl
0.48 MiB 46 min
<1 m
Download
48_turbine_back_bot_1_R_F DM (repaired).stl
1.64 MiB 1 h 33 min
1 m
Download
49_turbine_back_bot_2_R_F DM (repaired).stl
0.28 MiB 8 min
<1 m
Download
50_wing_bot_R_FDM (repair ed).stl
0.18 MiB 1 h 43 min
1 m
Download
51_wing_bot_corner_R_FDM (repaired).stl
0.01 MiB 3 min
<1 m
Download
52_wing_gun_bot_1_R_FDM ( repaired).stl
0.21 MiB 50 min
<1 m
Download
53_wing_gun_bot_2_R_FDM ( repaired).stl
0.20 MiB 26 min
<1 m
Download
54_wing_gun_bot_3_R_FDM ( repaired).stl
0.47 MiB 1 h 21 min
1 m
Download
55_wing_gun_bot_4_R_FDM ( repaired).stl
0.18 MiB 11 min
<1 m
Download
56_sub_wing_top_L_FDM (re paired).stl
3.54 MiB 7 h 12 min
4 m
Download
57_sub_wing_panel_1_top_L _FDM (repaired).stl
0.57 MiB 13 min
<1 m
Download
58_sub_wing_panel_2_top_L _FDM (repaired).stl
0.21 MiB 11 min
<1 m
Download
59_sub_wing_panel_3_top_L _FDM (repaired).stl
0.64 MiB 48 min
<1 m
Download
60_sub_wing_panel_4_top_L _FDM (repaired).stl
0.04 MiB 6 min
<1 m
Download
61_sub_wing_panel_5_top_L _FDM (repaired).stl
0.04 MiB 3 min
<1 m
Download
62_sub_wing_turbine_front _top_L_FDM (repaired).stl
0.48 MiB 46 min
<1 m
Download
63_turbine_back_top_1_L_F DM (repaired).stl
1.64 MiB 1 h 33 min
1 m
Download
64_turbine_back_top_2_L_F DM (repaired).stl
0.28 MiB 8 min
<1 m
Download
65_wing_top_L_FDM (repair ed).stl
0.20 MiB 1 h 50 min
1 m
Download
66_gun_top_1_L_FDM (repai red).stl
0.21 MiB 51 min
<1 m
Download
67_gun_top_2_L_FDM (repai red).stl
0.20 MiB 27 min
<1 m
Download
68_gun_top_3_L_FDM (repai red).stl
0.47 MiB 1 h 25 min
1 m
Download
69_gun_top_4_L_FDM (repai red).stl
0.18 MiB 11 min
<1 m
Download
70_sub_wing_bot_L_FDM (re paired).stl
3.55 MiB 7 h 11 min
4 m
Download
71_sub_wing_landing_cap_b ot_L_FDM (repaired).stl
0.01 MiB 8 min
<1 m
Download
72_sub_wing_panel_1_bot_L _FDM (repaired).stl
0.57 MiB 13 min
<1 m
Download
73_sub_wing_panel_2_bot_L _FDM (repaired).stl
0.21 MiB 11 min
<1 m
Download
74_sub_wing_panel_3_bot_L _FDM (repaired).stl
0.64 MiB 48 min
<1 m
Download
75_sub_wing_panel_4_bot_L _FDM (repaired).stl
0.04 MiB 6 min
<1 m
Download
76_sub_wing_panel_5_bot_L _FDM (repaired).stl
0.04 MiB 3 min
<1 m
Download
77_sub_wing_turbine_front _bot_L_FDM (repaired).stl
0.48 MiB 46 min
<1 m
Download
78_turbine_back_bot_1_L_F DM (repaired).stl
1.64 MiB 1 h 43 min
1 m
Download
79_turbine_back_bot_2_L_F DM (repaired).stl
0.28 MiB 8 min
<1 m
Download
80_wing_bot_L_FDM (repair ed).stl
0.18 MiB 1 h 45 min
1 m
Download
81_wing_bot_corner_L_FDM (repaired).stl
0.01 MiB 3 min
<1 m
Download
82_wing_gun_bot_1_L_FDM ( repaired).stl
0.21 MiB 50 min
<1 m
Download
83_wing_gun_bot_2_L_FDM ( repaired).stl
0.20 MiB 26 min
<1 m
Download
84_wing_gun_bot_3_L_FDM ( repaired).stl
0.47 MiB 1 h 17 min
1 m
Download
85_wing_gun_bot_4_L_FDM ( repaired).stl
0.18 MiB 11 min
<1 m
Download
86_pin_(x11)_FDM (repaire d).stl
0.07 MiB 4 min
<1 m
Download
87_Ge_lock_10H_(21)_FDM ( repaired).stl
0.03 MiB 4 min
<1 m
Download
88_platform_1_FDM (repair ed).stl
1.03 MiB 15 h 57 min
11 m
Download
89_platform_2_FDM (repair ed).stl
2.31 MiB 1 h 32 min
1 m
Download
90_platform_3_FDM (repair ed).stl
2.99 MiB 5 h 51 min
4 m
Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
Download
Tag (repaired).stl
1.70 MiB 1 h 16 min
1 m
Download

ABOUT THIS 3D MODEL

T-70 X-Wing is a successor to the signature T-65B starfighter that was initially manufactured for New Republic Defense Fleet. Similar to its predecessor, T-70 is equipped with a laser cannon on each wing and can boast of its hyperdrive capability and life-support system. The starfighter is designed for a single pilot and an astromech droid who fits into a socket near the engines to assist with repairs or even take over the flight. The author of the model for 3D printing mentioned that it is the BB-8 droid that he placed in the socket who was known to accompany his pilot Poe Dameron during flights on the T-70 X-wing starfighter. In addition to the newly introduced T-70’s signature built-in dual proton torpedo launchers, the X-Wing features advanced weaponry and proves to be versatile and manoeuvrable enough fighting both starfighters and capital ships. These are the advances that were widely used by the Resistance’s Starfighter Corps after the ship’s retirement making the X-Wing a signature combat aircraft of the Resistance. The author of the T-70 X-Wing model for 3D printing spent 130 hours in total to depict the design of one of the most famous starfighters from the Star Wars universe. The 3D printing model of T-70 X-Wing is remarkable for its incredible level of detail. Just imagine how your fleet inspired by the universe far far away will gain by the iconic starfighter!

ADAPTATION FOR 3D PRINTING

T-70 X-Wing model for 3D printing is an articulated assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 35 hours in total. The model’s cutting was chosen to minimise the amount of filament needed for generated support. Moreover, for you to receive the cleanest printing result possible the starfighter was divided into many assembly parts, e.g. laser cannons, proton torpedo launchers, landing gear parts and even BB-8 astromech who occupies his designated place are provided as separate STL files. For you to display the X-Wing model among your starships collection there is a platform, though its usage is optional - you can also assemble the fighter with landing gear instead of using caps. The model’s wings can fold and unfold and X-Wing’s canopy is also articulated for you to display the starfighter in different modes. There can also be found special tunnels throughout the whole model that were designed by our team for you to easily introduce LED wiring. All the assembly parts are provided in STL files in recommended positions that were worked out so to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. 

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the T-70 X-Wing's actual length that is 12480 mm. The 3D printing model's chosen scale is 1/34 for the FFF/FDM version and 1/68 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 90 parts;
- A printed model is 114 mm tall, 323 mm wide, 375 mm deep;
- Assembly kit includes pins and locks to connect parts securely without glue. One pin 86_pin_(x11)​ needs to be printed 11 times and one lock 87_Ge_lock_10H_(21) needs to be printed 21 times;
- Made with articulated wings and two alternative types of articulated canopy - one is designed with glass to be printed with transparent filament, the other is a simple frame;
- Tunnels throughout the starfighter are provided for LED wiring;
- Can be assembled with or without landing gear and displayed on a special platform;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 19 parts;
- A printed model is 57 mm tall, 162 mm wide, 188 mm deep;
- Can be assembled with or without landing gear and displayed on a special platform;
- Wings and canopy are articulated;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:
- Contains 19 parts;
- A printed model is 57 mm tall, 162 mm wide, 188 mm deep;
- Can be assembled with or without landing gear and displayed on a special platform;
- Wings and canopy are articulated;
- Contains some hollowed out parts to save resin.

SLS 1.0 version features:
- Contains 4 parts - a one-piece model with a) the wings unfolded, b) the wings folded + landing gear, c) the wings folded, d) the platform separated.
- Made as a solid one-piece model; 
- A printed model is 57 mm tall, 162 mm wide, 188 mm deep;

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of T-70 X-Wing Model for 3D printing which consist of 132 parts;
- 4 versions of files for this model for FFF/FDM, DLP/SLA and SLS printers;
- High-poly detailed model of T-70 X-Wing;
- Detailed settings that we provide as a recommendation for Cura 3.5.1, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the model of T-70 X-Wing for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble T-70 X-Wing 3D Printing Model at Gambody YouTube channel.

Also, you may like the other T-65B X-Wing 3D Printing Model as well as other Star Wars 3D Printing Models.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.4.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell
Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill
Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material
Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s

Speed 
Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 3 mm
Support Z Distance: 0.1 mm
    Support Top Distance: 0.1 mm
    Support Bottom Distance: 0.1 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus
Other author's 3D printings

Tags

x-wing, star wars, starfighter, ships, assembly, spaceship

Similar items

Browse more newly listed 3D printings