Make pre-order

(4)
big
cm: 18.3 w x 16.4 d x 29 h
in: 7.205 w x 6.457 d x 11.417 h
7
BUY FOR  $26.99

Source Files

|

Description

|

Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Version 2 and Version 3 are the new files for War Hammer MWO 3D Model optimized for 3D printing, the preview pictures of which you see above.

It is recommended:

  • Version 1 STL files on FDM/FFF 3D printers - old version with old joints;
  • Version 2 STL files on FDM/FFF 3D printers - new version with new scale and new joints;
  • Version 3 STL files on DLP/SLA/SLS 3D printers - new version with new scale and new joints.
File Name File Size Time / Filament
1_leg_1_R (repaired).stl
1.70 MiB 1 h 14 min
1 m
Download
2_leg_2_R (repaired).stl
2.16 MiB 2 h 50 min
2 m
Download
3_leg_3_R (repaired).stl
1.40 MiB 2 h 4 min
1 m
Download
4_leg_1_L (repaired).stl
1.70 MiB 1 h 14 min
1 m
Download
5_leg_2_L (repaired).stl
2.16 MiB 2 h 50 min
2 m
Download
6_leg_3_L (repaired).stl
1.40 MiB 2 h 5 min
1 m
Download
7_pelvis (repaired).stl
1.93 MiB 3 h 25 min
2 m
Download
8_arm_2_R (repaired).stl
1.57 MiB 1 h 55 min
1 m
Download
9_arm_1_R (repaired).stl
1.28 MiB 1 h 34 min
1 m
Download
10_arm_2_L (repaired).stl
1.57 MiB 1 h 54 min
1 m
Download
11_arm_1_L (repaired).stl
1.29 MiB 1 h 35 min
1 m
Download
12_body (repaired).stl
10.75 MiB 11 h 25 min
6 m
Download

MWO War Hammer 3D model is inspired by the MWO video game, so popular among players all over the world. This mech is bulkier than its brethren, with heavy armour and firepower, capable of destroying or producing severe damage to other mechs from the same class or inferior.

Being a popular bipedal vehicle in the BattleTech Universe, War Hammer mech displays respectable armouring, serving in different programs, thus becoming one of the greatest MechWarrior in the history. 

MWO War Hammer build is well protected by ten tons of armouring and incredible weaponry. Nevertheless its heavy construction, this mech has the freedom to maneuver weapons and fire without difficulty. 

Belonging to the class of heavy mechs, War Hammer engine can develop a top speed of 64.8 km/h, which ensures its capability to take part in most action engagements.

Building BattleTech 3D model

Whm 6D Battlemech 3D model features its heavy armor and weaponry reproduced for 3D printing. Every part of the mech has been designed to fit onto 18 x19 cm print bed. The model was created in Maya 3D modeling program. It is a high-poly, articulated model. 

The files are saved in STL format that is the most popular file format for 3D printing. The modeler made sure that you will handle the files easily in any 3D slicing program, such as Cura, or Simplify3D.

Assemble your own beast of war

Battletech War Hammer mech 3D print consists of 52 parts. After the assembly, the model will stand 250mm tall, 150mm wide, and 139mm deep. 

Note: Click HERE to watch the YouTube assembly video of the articulation mechanism. 

Buy MWO War Hammer builds by clicking the green ‘Buy’ button. Proceed to checkout. Insert your PayPal or credit card details and buy this mech. Print it and add it to your collection of war beasts

Check also Catapult 3D Model, supplementary add-ons for the Catapult model, and Timber Wolf 3D print

On 26.12.2016 the model files have been optimized and made solid. They now are adapted to be 3D printed using any slicing program. 3D model files are already available for purchase and download. 

________________________

On 01.12.2017 new scale and new version of joints have been added.

 

Now, the 3D Model of War Hammer MWO is available in two scale: 1/60 for Version 2 (FDM/FFF) and 1/100 for Version 3 (DLP/SLA/SLS).

There are 33 parts in Version 2 (FDM/FFF) and 12 parts for Version 3 (DLP/SLA/SLS).

Version 2 (FDM/FFF):
- Is 1:60 scale and after being printed will stand 290 mm tall, 183 mm wide, 164 mm deep;
- Made with new joints;
- All movable elements of the War Hammer Mech were saved.

Version 3 (DLP/SLA/SLS):
- Is 1:100 scale and will stand 174 mm tall, 110 mm wide, 99 mm deep;
- Made with new joints;
- All movable elements of the War Hammer Mech were saved;
- Has as few details as possible to keep printing costs down.

With new joints from Version 2 and Version 3 you will get next advantages:
1. Increases frictional force;
2. Possible to up scale or down scale the whole model;
3. Printable from any type of material;
4. Higher strength;
5. Material shrinkage does not affect at strength and friction.

STL files with new scale and new joints are already available for download in “Source files” tab for:
- Version 2 - STL files on FDM/FFF 3D printers;
- Version 3 - STL files on DLP/SLA/SLS 3D printers.

Watch the tutorial video on how to assemble War Hammer MWO 3D Printing Miniature at Gambody YouTube channel

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.0.4. and print on an Ultimaker 2 in PLA material.

Note:

- You can print new joints from Version 2 and Version 3 with 20-30% infill. 
- With the new joints from Version 2 and Version 3 you can up scale or down scale the whole model.

- All parts of connectors should be printed at 100% infill.

To avoid printing problems, we recommend the following settings:

Quality 
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
   Top/Bottom Line Width: 0.4 mm
   Infill Line Width: 0.4 mm
   Skirt/Brim Line Width: 0.4 mm
   Support Line Width: 0.4 mm
   Support Interface Line Width: 0.4 mm
   Support Roof Line Width: 0.4 mm
   Support Floor Line Width: 0.4
 Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill 
Infill Density: 20% (all parts of the connectors should be printed at 100% infill)
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material 
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Speed 
Print Speed: 45 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
    Support Speed: 45 mm/s
      Support Infill Speed: 45 mm/s
      Support Interface Speed: 30 mm/s
        Support Roof Speed: 30mm/s
        Support Floor Speed: 30 mm/s
Travel Speed: 80 mm/s
Initial Layer Speed: 15 mm/s

    Initial Layer Print Speed: 15 mm/s
    Initial Layer Travel Speed: 26.6667 mm/s
Skirt/Brim Speed: 15 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm 

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Enable Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 30 %
    Support Line Distance: 1.3333 mm
Support Z Distance: 0.3 mm
    Support Top Distance: 0.3 mm
    Support Bottom Distance: 0.3 mm
Support X/Y Distance: 0.7 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.2 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm

Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings