Make pre-order

Sauron 3D Printing Figurine | Assembly

average
cm: 31.4 w x 34.3 d x 38 h
in: 12.362 w x 13.504 d x 14.961 h

Source Files

|

Description

|

Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Sauron 3D Printing Figurine comes in 5 versions for each 3D printer type (FFF/FDM, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing figurine is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
21.33 MiB 7 h 1 min
4 m
48 x 68 x 93 Download
2_body_FDM(repaired).stl
30.03 MiB 15 h 38 min
9 m
Download
3_body_with_cloak_FDM(rep aired).stl
31.56 MiB 33 h 23 min
21 m
Download
4_legs_FDM(repaired).stl
31.79 MiB 21 h 7 min
12 m
Download
5_arm_R_1_FDM(repaired).s tl
20.65 MiB 2 h 35 min
1 m
40 x 36 x 52 Download
6_arm_R_2_FDM(repaired).s tl
19.22 MiB 3 h 6 min
2 m
27 x 33 x 61 Download
7_arm_L_1_FDM(repaired).s tl
23.24 MiB 2 h 56 min
2 m
27 x 28 x 60 Download
8_arm_L_2_FDM(repaired).s tl
22.72 MiB 3 h 33 min
2 m
27 x 33 x 65 Download
9_hand_R_FDM(repaired).st l
16.58 MiB 2 h 23 min
2 m
36 x 40 x 34 Download
11_hand_L_FDM(repaired).s tl
14.64 MiB 2 h 23 min
1 m
25 x 27 x 40 Download
12_foot_R_FDM(repaired).s tl
21.87 MiB 5 h 19 min
3 m
29 x 60 x 95 Download
13_foot_L_FDM(repaired).s tl
21.35 MiB 5 h 31 min
3 m
46 x 46 x 94 Download
14_mace_1_FDM(repaired).s tl
18.08 MiB 5 h 25 min
3 m
36 x 40 x 133 Download
15_mace_2_FDM(repaired).s tl
7.44 MiB 46 min
<1 m
10 x 12 x 45 Download
16_armor_on_leg_R_FDM(rep aired).stl
17.72 MiB 2 h 26 min
1 m
70 x 43 x 18 Download
17_armor_on_leg_L_FDM(rep aired).stl
16.43 MiB 2 h 23 min
1 m
70 x 43 x 17 Download
18_knee_pad_R_FDM(repaire d).stl
7.54 MiB 1 h 16 min
1 m
32 x 39 x 31 Download
19_knee_pad_L_FDM(repaire d).stl
7.56 MiB 1 h 10 min
1 m
30 x 28 x 32 Download
20_soulder_strap_L_FDM(re paired).stl
17.58 MiB 5 h 29 min
4 m
50 x 61 x 63 Download
21_soulder_strap_R_FDM(re paired).stl
16.86 MiB 5 h 14 min
3 m
38 x 61 x 69 Download
22_soulder_strap_on_cloak _L_FDM(repaired).stl
17.94 MiB 5 h 18 min
3 m
45 x 67 x 68 Download
23_soulder_strap_on_cloak _R_FDM(repaired).stl
17.40 MiB 5 h 22 min
3 m
63 x 39 x 69 Download
24_spike_on_arm_L_1_FDM(r epaired).stl
1.10 MiB 6 min
<1 m
7 x 8 x 12 Download
25_spike_on_arm_L_2_FDM(r epaired).stl
1.63 MiB 10 min
<1 m
7 x 11 x 17 Download
26_spike_on_arm_L_3_FDM(r epaired).stl
1.62 MiB 10 min
<1 m
7 x 12 x 16 Download
27_spike_on_arm_R_1_FDM(r epaired).stl
1.18 MiB 6 min
<1 m
4 x 10 x 12 Download
28_spike_on_arm_R_2_FDM(r epaired).stl
1.69 MiB 9 min
<1 m
5 x 11 x 15 Download
29_spike_on_arm_R_3_FDM(r epaired).stl
1.37 MiB 8 min
<1 m
13 x 5 x 13 Download
30_spike_on_foot_R_1_FDM( repaired).stl
2.76 MiB 17 min
<1 m
16 x 6 x 24 Download
31_spike_on_foot_R_2_FDM( repaired).stl
2.17 MiB 11 min
<1 m
13 x 5 x 20 Download
32_spike_on_foot_R_3_FDM( repaired).stl
1.37 MiB 4 min
<1 m
9 x 3 x 15 Download
33_spike_on_foot_L_1_FDM( repaired).stl
2.34 MiB 7 min
<1 m
15 x 6 x 18 Download
34_spike_on_foot_L_2_FDM( repaired).stl
1.76 MiB 7 min
<1 m
12 x 4 x 15 Download
35_spike_on_foot_L_3_FDM( repaired).stl
1.33 MiB 5 min
<1 m
9 x 3 x 13 Download
36_cloak_1_FDM(repaired). stl
28.45 MiB 27 h 20 min
22 m
138 x 103 x 86 Download
37_cloak_2_FDM(repaired). stl
21.24 MiB 14 h 28 min
9 m
102 x 107 x 101 Download
38_cloak_3_FDM(repaired). stl
18.97 MiB 49 h 13 min
33 m
125 x 116 x 146 Download
39_cloak_4_FDM(repaired). stl
18.90 MiB 35 h 18 min
23 m
128 x 100 x 118 Download
40_cloak_5_FDM(repaired). stl
15.68 MiB 26 h
15 m
180 x 102 x 109 Download
41_cloak_6_FDM(repaired). stl
14.06 MiB 14 h 20 min
8 m
170 x 71 x 66 Download
42_cloak_7_FDM(repaired). stl
21.60 MiB 20 h 20 min
12 m
177 x 82 x 102 Download
43_cloak_8_FDM(repaired). stl
18.63 MiB 35 h 56 min
25 m
131 x 152 x 132 Download
44_helmet_1_FDM(repaired) .stl
15.35 MiB 2 h 47 min
2 m
31 x 39 x 50 Download
45_helmet_2_FDM(repaired) .stl
14.65 MiB 2 h 36 min
2 m
38 x 30 x 49 Download
46_platform_1_FDM(repaire d).stl
17.53 MiB 24 h 50 min
14 m
92 x 151 x 64 Download
47_platform_2_FDM(repaire d).stl
16.38 MiB 20 h 23 min
11 m
119 x 127 x 58 Download
48_platform_3_FDM(repaire d).stl
16.95 MiB 27 h 35 min
15 m
137 x 149 x 46 Download
49_platform_4_FDM(repaire d).stl
18.74 MiB 29 h 27 min
16 m
127 x 155 x 52 Download
50_ge_lock_7S(x5)_FDM(rep aired).stl
0.02 MiB 3 min
<1 m
7 x 18 x 2 Download
51_ge_lock_10H(x14)_FDM(r epaired).stl
0.03 MiB 4 min
<1 m
18 x 10 x 2 Download
1_v2_head_FDM (repaired). stl
27.93 MiB 7 h 25 min
4 m
44 x 50 x 117 Download
10_hand_R_with_mace_FDM(r epaired).stl
17.16 MiB 2 h 14 min
1 m
30 x 24 x 39 Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min
1 m
150 x 18 x 5 Download
9_v2_1_hand_R_FDM(repaire d).stl
32.72 MiB 2 h 5 min
1 m
36 x 40 x 34 Download
9_v2_2_finger_FDM(repaire d).stl
10.53 MiB 11 min
<1 m
16 x 16 x 10 Download
11_v2_hand_L_with_mace_FD M(repaired).stl
22.89 MiB 2 h 10 min
1 m
Download
4_legs_without_chain_mail _FDM(repaired).stl
61.97 MiB 16 h 45 min
10 m
Download
52_solid_cloak_FDM(repair ed).stl
55.65 MiB 277 h 56 min
200 m
Download
53_legs_knee_armor_FDM(re paired).stl
57.80 MiB 21 h 48 min
12 m
78 x 71 x 115 Download
54_armor_knee_R_FDM(repai red).stl
10.83 MiB 54 min
1 m
28 x 45 x 13 Download
55_armor_knee_L_FDM(repai red).stl
11.38 MiB 58 min
1 m
43 x 27 x 18 Download

ABOUT THIS 3D FIGURINE

Sauron, the actual Lord of the Rings, is the main antagonist of J.R.R.Tolkien’s legendarium and the evil incarnate of the Middle-earth. The titular character only got a tiny portion of screen time but easily managed to inspire with awe all fans of the fantasy universe, including one of our contributing 3D artists. The incredible project took the author around 190 hours to complete and we are honoured to welcome the very Lord of the Rings to Gambody’s category of the same name! The author of Sauron 3D figurine demonstrated painstaking attention to detail and unveiled the 3D printing project to meet the wishes of the most passionate fans of the franchise. The Dark Lord is depicted wearing his iconic suit of steel armour as if he’s just emerged on the battlefield where his forces are fighting the Last Alliance of Elves and Men. The mightiest of the Maiar has the horned helmet resting on his head and his pauldrons, cuisses and vambraces are covered with sharp spikes. There are even a fine mail and a skirt to add to the Master’s complex armour! Thanks to the effort of the 3D artist, Sauron figurine can be assembled both cloaked in its giant tattered cape or without one. Last but definitely not least, are the interchangeable gauntlets of the Sauron figurine that allow one to recreate the battle on the slopes of Mount Doom at its different stages. Your 3D printed Lord of the Rings can be displayed either wielding his formidable 6-bladed mace or demonstrating the source of his power - the One Ring. The fragments of a fierce battle added to the model’s platform confirm the enthusiasm of the 3D artist. Not to mention the intricately detailed entwining of the intaglio decoration that winds around Sauron’s armour! 

ADAPTATION FOR 3D PRINTING

Sauron figurine for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 57 hours in total. The figurine’s anatomy was thoroughly reviewed during the moderation process for the Dark Lord to be depicted harmoniously in the intended pose in his complex suit of armour. The imposing figurine and its giant cape were divided into as many assembly parts as needed to fit even the smallest 3D printers' build plates and for you to nevertheless receive a towering 3D printed Sauron after assembly among your LOTR collection. The model’s cutting was chosen by our team to minimise the amount of filament needed for generated support and some of the parts were hollowed out for you to save resin in the model’s Eco version. In order to conceal the places where assembly parts of the figurine must be connected, the model was cut along the contour of his plate armour seams. For you to achieve the cleanest 3D printed result, Sauron’s spiky helm, gauntlets, pauldrons, rerebraces, individual spikes all over the suit, mace, putrefied cloak etc. are provided as separate assembly pieces. All assembly parts are provided in STL files in recommended positions that were worked out so to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any figurine's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format.

The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from Sauron's actual height that is 2780 mm. The 3D printing figurine's chosen scale is 1/8 for the FFF/FDM version and 1/16 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 55 parts;
- A printed model is 380 mm tall, 314 mm wide, 343 mm deep;
- Assembly kit includes locks to connect the model's parts securely without glue. One lock 50_ge_lock_7S(x5) needs to be printed 5 times; lock 51_ge_lock_10H(x14) needs to be printed 14 times;
- Can be displayed wielding the mace or holding up the One Ring either cloaked in a cape or without one;
- Made with a platform to resemble the battle scene on the slopes of Mount Doom;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 17 parts;
- A printed model is 190 mm tall, 157 mm wide, 172 mm deep;
- Can be displayed wielding the mace or holding up the One Ring either cloaked in a cape or without one;
- Made with a platform to resemble the battle scene on the slopes of Mount Doom;
- All parts are divided in such a way to fit the build plates and to make sure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:
- Contains 17 parts;
- A printed model is 190 mm tall, 157 mm wide, 172 mm deep;
- Can be displayed wielding the mace or holding up the One Ring either cloaked in a cape or without one;
- Made with a platform to resemble the battle scene on the slopes of Mount Doom;
- Contains some hollowed out parts to save resin.

DLP/SLA Pre-supported 1.0 version features:
- Contains 17 parts;
- A printed model is 190 mm tall, 157 mm wide, 172 mm deep;
- The STL files that this version comprises are pre-supportedhollowed out, and have drain holes where needed;
- You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate;
- When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact.

SLS 1.0 version features:
- Made as a solid one-piece figurine;
- A printed model is 190 mm tall, 157 mm wide, 172 mm deep;
- Contains 5 parts - one-piece Sauron figurine variants with the platform separated;
- Can be displayed wielding the mace or holding up the One Ring either cloaked in a cape or without one.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Sauron 3D Figurine for 3D printing which consist of 111 parts;
- 5 versions of files for this model for FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS;
- High-poly detailed figurine of Sauron;
Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format;
- Detailed settings that we provide as a recommendation for Cura , Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the figurine of Sauron for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Sauron 3D Printing Figurine at Gambody YouTube channel.

Also, you may like other The Lord of the Rings 3D Printing Figurines.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

Note:
- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Quality
Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill 
Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Material 
Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at support@gambody.com)

Speed 

You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Travel 
Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings