Make pre-order

Tapion 3D Printing Figurine | Assembly

(7)
average
cm: 46.8 w x 33.4 d x 34 h
in: 18.425 w x 13.15 d x 13.386 h
9
BUY FOR  $24.99

Source Files

|

Description

|

Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Tapion 3D printing figurine comes in 4 versions for each 3D printer type (FFF/FDM, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing figurine is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
20.94 MiB 1 h 40 min
1 m
56 x 31 x 33 Download
2_hair_1_FDM(repaired).st l
16.78 MiB 1 h 24 min
1 m
30 x 55 x 35 Download
3_hair_2_FDM(repaired).st l
6.21 MiB 22 min
<1 m
33 x 9 x 22 Download
4_cloak_FDM(repaired).stl
20.98 MiB 3 h 42 min
2 m
97 x 47 x 30 Download
5_body_FDM(repaired).stl
30.00 MiB 5 h 11 min
3 m
67 x 39 x 47 Download
6_legs_FDM(repaired).stl
30.17 MiB 10 h 17 min
6 m
70 x 82 x 94 Download
7_arm_R_FDM(repaired).stl
10.99 MiB 37 min
<1 m
16 x 26 x 27 Download
8_hand_R_FDM(repaired).st l
15.08 MiB 42 min
<1 m
23 x 27 x 34 Download
9_arm_L_FDM(repaired).stl
10.80 MiB 39 min
<1 m
31 x 22 x 24 Download
10_hand_L_FDM(repaired).s tl
15.86 MiB 46 min
<1 m
22 x 20 x 35 Download
11_ocarina_FDM(repaired). stl
15.67 MiB 23 min
<1 m
15 x 22 x 22 Download
12_sword_FDM(repaired).st l
16.37 MiB 1 h 31 min
1 m
33 x 132 x 10 Download
13_leg_R_FDM(repaired).st l
16.07 MiB 2 h 6 min
1 m
25 x 61 x 49 Download
14_leg_L_FDM(repaired).st l
16.63 MiB 2 h 24 min
1 m
25 x 62 x 49 Download
15_platform_1_FDM(repaire d).stl
21.90 MiB 14 h 27 min
8 m
134 x 135 x 46 Download
16_platform_2_1_FDM(repai red).stl
13.63 MiB 20 h 33 min
15 m
134 x 110 x 119 Download
17_platform_2_2_FDM(repai red).stl
12.55 MiB 18 h 1 min
14 m
111 x 116 x 78 Download
18_platform_2_3_FDM(repai red).stl
14.91 MiB 23 h 14 min
16 m
113 x 137 x 169 Download
19_platform_2_4_FDM(repai red).stl
14.91 MiB 21 h 33 min
14 m
135 x 134 x 170 Download
20_platform_2_5_FDM(repai red).stl
9.79 MiB 51 min
<1 m
42 x 11 x 52 Download
21_platform_2_6_FDM(repai red).stl
6.77 MiB 31 min
<1 m
35 x 7 x 32 Download
22_platform_2_7_FDM(repai red).stl
18.31 MiB 19 h 32 min
11 m
168 x 119 x 28 Download
23_platform_2_8_FDM(repai red).stl
13.73 MiB 24 h 32 min
14 m
127 x 180 x 62 Download
24_platform_2_9_FDM(repai red).stl
16.42 MiB 35 h 22 min
20 m
184 x 133 x 78 Download
25_platform_2_10_FDM(repa ired).stl
16.81 MiB 22 h 38 min
13 m
123 x 174 x 62 Download
26_platform_3_1_FDM(repai red).stl
9.78 MiB 3 h 48 min
2 m
30 x 59 x 143 Download
27_platform_3_2_FDM(repai red).stl
10.37 MiB 6 h 34 min
4 m
40 x 86 x 119 Download
28_platform_3_3_FDM(repai red).stl
12.27 MiB 8 h 12 min
5 m
69 x 67 x 55 Download
29_platform_3_4_FDM(repai red).stl
11.16 MiB 3 h 24 min
2 m
35 x 50 x 145 Download
30_platform_3_5_FDM(repai red).stl
11.38 MiB 8 h 41 min
5 m
75 x 64 x 118 Download
31_platform_3_6_FDM(repai red).stl
11.43 MiB 7 h 53 min
5 m
62 x 75 x 57 Download
32_platform_3_7_FDM(repai red).stl
28.90 MiB 120 h 8 min
71 m
190 x 194 x 116 Download
33_platform_3_8_FDM(repai red).stl
17.04 MiB 22 h 33 min
13 m
177 x 127 x 48 Download
34_platform_3_9_FDM(repai red).stl
15.97 MiB 20 h 55 min
12 m
125 x 176 x 48 Download
35_platform_3_10_FDM(repa ired).stl
14.69 MiB 19 h 52 min
12 m
177 x 125 x 48 Download
36_platform_3_11_FDM(repa ired).stl
16.55 MiB 22 h 1 min
13 m
125 x 176 x 57 Download
37_ge_lock_7S(x3)_FDM(rep aired).stl
0.02 MiB 3 min
<1 m
18 x 7 x 2 Download
38_ge_lock_10H(x34)_FDM(r epaired).stl
0.03 MiB 4 min
<1 m
18 x 10 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min
1 m
150 x 18 x 5 Download

ABOUT THIS 3D FIGURINE

Tapion is a true hero who fights the evil and protects the people in the course of Dragon Ball Z: Wrath of the Dragon Japanese anime. This character was developed by famous artist Akira Toriyama and is known to carry out a painful duty - his body guards a half of evil Hirudegarn. The author of the Tapion model went all out when working on the design of the legendary hero for 3D printing! The figurine is depicted taking into account all fine elements usually associated with the character. For example, Tapion is portrayed with his huge mohawk, an unusual band on the sides of his head and the Brave Sword on his back. The hero is holding in hands what seems to be Tapion’s enchanted ocarina or the Hero's Flute that in combination with the sword is capable of being a powerful weapon. It has taken the 3D artist 185 hours in total for you to have not only a highly-detailed Konatsian figurine but also a variety of platforms to choose from. In addition to a simple base, there is also a beautiful scene of Tapion soaring in the middle of a large water splash surrounded by smaller waves - a scene that truly conveys the power of the hero! Moreover, once printed you can mount your Tapion on top of the head of defeated Hirudegarn hence recreating a scene of the battle between sworn enemies. Choose the platform you like the most or the one perfect for your thematic diorama and start printing your very own Tapion figurine!

ADAPTATION FOR 3D PRINTING

Tapion figurine for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 48 hours in total. The figurine’s anatomy was thoroughly reviewed during the moderation process for the Hero to be depicted harmoniously in the intended soaring pose. The model’s cutting was chosen by our team to minimise the amount of filament needed for generated support and some of the parts were hollowed out for you to save resin in the model’s Eco version. Moreover, in order to conceal places where assembly parts of the figurine must be connected, the model was cut along the contour of Tapion clothes’ seams. The figurine's platforms in its assembly version were divided into many separate parts to fit even the smallest 3D printers’ build plates. Besides, in order for you to receive the cleanest 3D printed result, such smaller parts as Tapion’s Brave Sword, ocarina, hair strands etc. are also available as separate assembly pieces. All assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. 

The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from Tapion's actual height that is 1830 mm. The 3D printing figurine's chosen scale is 1/8 for the FFF/FDM version and 1/16 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 38 parts;
- A printed model is 340 mm tall, 468 mm wide, 334 mm deep;
- Assembly kit includes locks to connect parts without glue. One lock 37_ge_lock_7S(x3) needs to be printed 3 times; lock​ 38_ge_lock_10H(x34)​ needs to be printed 34 times;
- Figurine comes with three alternative platforms - a simple base, a powerful splash of water and the defeated Hirudegarn's head;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 16 parts;
- A printed model is 170 mm tall, 234 mm wide, 167 mm deep;
- Figurine comes with three alternative platforms - a simple base, a powerful splash of water and the defeated Hirudegarn's head;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:
- Contains 16 parts;
- A printed model is 170 mm tall, 234 mm wide, 167 mm deep;
- Figurine comes with three alternative platforms - a simple base, a powerful splash of water and the defeated Hirudegarn's head;
- Contains some hollowed out parts to save resin.

SLS 1.0 version features::
- Made as a solid one-piece figurine;
- A printed model is 170 mm tall, 234 mm wide, 167 mm deep;
- Contains 7 parts - three one-piece models with each platform variant and a solid Tapion figurine with all platforms separated.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Tapion 3D printing figurine which consist of 77 parts;
- 4 versions of files for this model for FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS;
- High-poly detailed figurine of Tapion;
- Detailed settings that we provide as a recommendation for Cura 3.5.1, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get Tapion 3D printing figurine​ immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Tapion 3D printing figurine at Gambody YouTube channel.

Also, you may like other Dragon Ball 3D Printing Figurines as well as other Anime Figurines for 3D Printing.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.5.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill 
Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material 
Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Speed 
Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
    Support Speed: 45 mm/s 
     Support Infill Speed: 45 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 45 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.6562 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 2.2 mm
Support Z Distance: 0.13 mm
    Support Top Distance: 0.13 mm
    Support Bottom Distance: 0.13 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 15 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Tags

Tapion, Anime, Japan, Manga, Dragonball, Assembly, Hero, Konats, Akira Toriyama

Similar items

Browse more newly listed 3D printings