Make pre-order

Imperial Shuttle 3D Printing Model | Assembly + Action

average
cm: 44.3 w x 58.8 d x 68 h
in: 17.441 w x 23.15 d x 26.772 h

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

- 2 versions of Imperial Shuttle STL files for FFF/FDM and DLP/SLA/SLS - files for both versions are available for download after the purchase

- STL files of high-poly Imperial Shuttle 3D Model for 3D printing consist of 283 parts
- Sizes:
FFF/FDM: 680 mm tall, 443 mm wide, 588 mm deep
DLP/SLA/SLS: 340 mm tall, 221 mm wide, 294 mm deep

Assembly Manual for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format
- Detailed settings that we provide as a recommendation for Cura, Simplify3D and Slic3r for the best print
- Full technical support from the Gambody Support Team

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
_1_body_cabine_1_FDM (rep aired).stl
17.87 MiB 21 h 49 min
11 m
134 x 53 x 82 Download
_2_body_cabine_2_FDM (rep aired).stl
21.61 MiB 50 h 54 min
35 m
173 x 91 x 153 Download
_3_cabine_door_a_FDM (rep aired).stl
0.65 MiB 6 h 23 min
3 m
69 x 11 x 106 Download
_4_cabine_door_b_FDM (rep aired).stl
0.23 MiB 2 h 22 min
1 m
58 x 99 x 2 Download
_5_body_cabine_3_FDM (rep aired).stl
2.53 MiB 36 h 24 min
20 m
141 x 87 x 111 Download
_6_body_cabine_4_FDM (rep aired).stl
4.90 MiB 9 h 33 min
5 m
99 x 82 x 15 Download
_8_body_1_R_FDM (repaired ).stl
4.67 MiB 92 h 59 min
60 m
Download
_9_body_1_L_FDM (repaired ).stl
4.67 MiB 92 h
60 m
Download
_11_body_2_L_FDM (repaire d).stl
6.08 MiB 62 h 52 min
38 m
Download
_12_body_back_R_FDM (repa ired).stl
42.26 MiB 24 h 30 min
14 m
Download
_13_body_back_L_FDM (repa ired).stl
42.25 MiB 24 h 43 min
14 m
Download
_14_body_back_glass_x22_F DM (repaired).stl
0.16 MiB 5 min
<1 m
7 x 33 x 1 Download
_15_wing_top_base_FDM (re paired).stl
1.32 MiB 33 h 7 min
23 m
53 x 186 x 110 Download
_16_wing_top_1_FDM (repai red).stl
0.29 MiB 32 h 6 min
19 m
18 x 167 x 159 Download
_17_wing_top_2_FDM (repai red).stl
0.21 MiB 29 h 48 min
17 m
Download
_18_wing_top_3_FDM (repai red).stl
0.10 MiB 22 h 31 min
14 m
Download
_19_wing_top_4_FDM (repai red).stl
0.10 MiB 27 h 46 min
17 m
Download
_20_wing_top_5_FDM (repai red).stl
0.18 MiB 37 h 2 min
23 m
Download
_21_wing_top_6_FDM (repai red).stl
0.08 MiB 31 h 13 min
20 m
Download
_22_wing_top_7_FDM (repai red).stl
0.09 MiB 28 h 56 min
18 m
Download
_23_wing_top_8_FDM (repai red).stl
0.15 MiB 44 h 14 min
28 m
Download
_24_wing_top_panel_1_R_FD M (repaired).stl
0.02 MiB 5 h 26 min
3 m
103 x 154 x 7 Download
_25_wing_top_panel_2_R_FD M (repaired).stl
0.01 MiB 3 h 27 min
2 m
84 x 72 x 6 Download
_26_wing_top_panel_3_R_FD M (repaired).stl
0.03 MiB 9 h 26 min
5 m
Download
_27_wing_top_panel_4_R_FD M (repaired).stl
0.03 MiB 6 h 15 min
4 m
Download
_28_wing_top_panel_5_R_FD M (repaired).stl
0.03 MiB 1 h 16 min
1 m
Download
_29_wing_top_panel_6_R_FD M (repaired).stl
0.02 MiB 14 h 28 min
8 m
Download
_30_wing_top_panel_7_R_FD M (repaired).stl
0.03 MiB 11 h 49 min
7 m
Download
_31_wing_top_panel_8_R_FD M (repaired).stl
0.65 MiB 5 h 59 min
3 m
Download
_32_wing_top_panel_1_L_FD M (repaired).stl
0.02 MiB 5 h 27 min
3 m
103 x 154 x 7 Download
_33_wing_top_panel_2_L_FD M (repaired).stl
0.01 MiB 3 h 27 min
2 m
Download
_34_wing_top_panel_3_L_FD M (repaired).stl
0.03 MiB 9 h 27 min
5 m
Download
_35_wing_top_panel_4_L_FD M (repaired).stl
0.03 MiB 6 h 15 min
4 m
Download
_36_wing_top_panel_5_L_FD M (repaired).stl
0.02 MiB 1 h 16 min
1 m
Download
_37_wing_top_panel_6_L_FD M (repaired).stl
0.02 MiB 14 h 27 min
8 m
Download
_38_wing_top_panel_7_L_FD M (repaired).stl
0.03 MiB 11 h 50 min
7 m
123 x 221 x 7 Download
_39_wing_top_panel_8_L_FD M (repaired).stl
0.65 MiB 5 h 60 min
3 m
Download
_40_wing_1_R_FDM (repaire d).stl
0.34 MiB 40 h 30 min
23 m
Download
_41_wing_2_R_FDM (repaire d).stl
0.12 MiB 19 h 34 min
12 m
18 x 167 x 93 Download
_42_wing_3_R_FDM (repaire d).stl
0.14 MiB 32 h 56 min
21 m
Download
_43_wing_5_R_FDM (repaire d).stl
1.48 MiB 43 h 20 min
30 m
Download
_44_wing_R_panel_in_1_FDM (repaired).stl
0.02 MiB 11 h 19 min
6 m
158 x 131 x 6 Download
_45_wing_R_panel_in_2_FDM (repaired).stl
0.01 MiB 5 h 4 min
3 m
61 x 135 x 6 Download
_46_wing_R_panel_in_3_FDM (repaired).stl
0.01 MiB 9 h 14 min
5 m
131 x 135 x 6 Download
_47_wing_R_panel_in_4_FDM (repaired).stl
0.03 MiB 2 h 19 min
1 m
76 x 92 x 7 Download
_48_wing_R_panel_out_1_FD M (repaired).stl
0.02 MiB 5 h 55 min
3 m
145 x 72 x 7 Download
_49_wing_R_panel_out_2_FD M (repaired).stl
0.03 MiB 14 h 16 min
8 m
134 x 231 x 6 Download
_50_wing_R_panel_out_3_FD M (repaired).stl
0.03 MiB 9 h 25 min
5 m
69 x 231 x 6 Download
_51_wing_R_panel_out_4_FD M (repaired).stl
0.03 MiB 1 h 54 min
1 m
65 x 83 x 7 Download
_52_wing_4_R_FDM (repaire d).stl
1.10 MiB 42 h 50 min
28 m
96 x 138 x 204 Download
_53_wing_1_L_FDM (repaire d).stl
0.34 MiB 40 h 26 min
23 m
23 x 171 x 170 Download
_54_wing_2_L_FDM (repaire d).stl
0.12 MiB 20 h 8 min
12 m
18 x 167 x 93 Download
_55_wing_3_L_FDM (repaire d).stl
0.14 MiB 32 h 52 min
21 m
18 x 167 x 122 Download
_56_wing_4_L_FDM (repaire d).stl
1.10 MiB 43 h 2 min
30 m
96 x 204 x 138 Download
_57_wing_5_L_FDM (repaire d).stl
1.56 MiB 44 h 11 min
30 m
96 x 204 x 122 Download
_58_wing_L_panel_in_1_FDM (repaired).stl
0.02 MiB 11 h 38 min
7 m
6 x 131 x 158 Download
_59_wing_L_panel_in_2_FDM (repaired).stl
0.01 MiB 4 h 58 min
3 m
6 x 135 x 61 Download
_60_wing_L_panel_in_3_FDM (repaired).stl
0.01 MiB 9 h 14 min
6 m
6 x 135 x 131 Download
_61_wing_L_panel_in_4_FDM (repaired).stl
0.03 MiB 2 h 20 min
1 m
76 x 92 x 7 Download
_62_wing_L_panel_out_1_FD M (repaired).stl
0.02 MiB 5 h 56 min
3 m
145 x 72 x 7 Download
_63_wing_L_panel_out_2_FD M (repaired).stl
0.03 MiB 14 h 17 min
8 m
134 x 231 x 6 Download
_64_wing_L_panel_out_3_FD M (repaired).stl
0.03 MiB 9 h 25 min
5 m
69 x 231 x 6 Download
_65_wing_L_panel_out_4_FD M (repaired).stl
0.03 MiB 1 h 54 min
1 m
65 x 83 x 7 Download
_66_wing_R_gun_a_FDM (rep aired).stl
0.69 MiB 1 h 57 min
1 m
Download
_67_wing_R_gun_b_FDM (rep aired).stl
0.08 MiB 12 min
<1 m
Download
_68_wing_R_gun_c_FDM (rep aired).stl
0.69 MiB 1 h 56 min
1 m
90 x 76 x 15 Download
_69_wing_L_gun_b_FDM (rep aired).stl
0.08 MiB 12 min
<1 m
24 x 25 x 8 Download
_70_wing_L_gun_c_FDM (rep aired).stl
0.69 MiB 1 h 56 min
1 m
90 x 76 x 15 Download
_71_wing_L_gun_a_FDM (rep aired).stl
0.69 MiB 1 h 56 min
1 m
72 x 92 x 15 Download
_72_turbine_R_FDM (repair ed).stl
2.18 MiB 3 h 20 min
2 m
Download
_73_turbine_L_FDM (repair ed).stl
2.18 MiB 3 h 20 min
2 m
114 x 54 x 15 Download
_74_gear_1_a_FDM (repaire d).stl
1.40 MiB 6 h 19 min
3 m
54 x 54 x 31 Download
_75_gear_1_b_FDM (repaire d).stl
0.43 MiB 1 h 17 min
1 m
13 x 113 x 10 Download
_76_gear_1_c_FDM (repaire d).stl
0.74 MiB 1 h 5 min
1 m
31 x 9 x 31 Download
_77_gear_2_a_FDM (repaire d).stl
0.76 MiB 33 min
<1 m
Download
_78_gear_2_b_FDM (repaire d).stl
0.16 MiB 16 min
<1 m
8 x 45 x 6 Download
_79_gear_3_a_R_FDM (repai red).stl
0.61 MiB 1 h 39 min
1 m
45 x 45 x 10 Download
_80_gear_3_b_R_FDM (repai red).stl
0.14 MiB 24 min
<1 m
15 x 46 x 8 Download
_81_gear_4_a_R_FDM (repai red).stl
0.61 MiB 1 h 44 min
1 m
45 x 45 x 10 Download
_82_gear_4_b_R_FDM (repai red).stl
0.14 MiB 24 min
<1 m
15 x 46 x 8 Download
_83_gear_5_a_R_FDM (repai red).stl
0.81 MiB 35 min
<1 m
25 x 25 x 10 Download
_84_gear_5_b_R_FDM (repai red).stl
0.16 MiB 17 min
<1 m
17 x 46 x 6 Download
_85_gear_6_a_R_FDM (repai red).stl
0.81 MiB 35 min
<1 m
25 x 25 x 10 Download
_86_gear_6_b_R_FDM (repai red).stl
0.16 MiB n.a.
n.a.
17 x 46 x 6 Download
_87_gear_3_a_L_FDM (repai red).stl
0.61 MiB 1 h 37 min
1 m
Download
_88_gear_3_b_L_FDM (repai red).stl
0.14 MiB 24 min
<1 m
Download
_89_gear_4_a_L_FDM (repai red).stl
0.61 MiB 1 h 37 min
1 m
45 x 45 x 10 Download
_90_gear_4_b_L_FDM (repai red).stl
0.14 MiB 24 min
<1 m
Download
_91_gear_5_a_L_FDM (repai red).stl
0.81 MiB 36 min
<1 m
25 x 25 x 10 Download
_92_gear_5_b_L_FDM (repai red).stl
0.16 MiB 16 min
<1 m
Download
_93_gear_6_a_L_FDM (repai red).stl
0.81 MiB 38 min
<1 m
Download
_94_gear_6_b_L_FDM (repai red).stl
0.16 MiB 17 min
<1 m
8 x 45 x 6 Download
_95_button_a_FDM (repaire d).stl
0.21 MiB 39 min
<1 m
8 x 70 x 10 Download
_96_button_b_FDM (repaire d).stl
0.28 MiB 30 min
<1 m
46 x 15 x 9 Download
_97_button_c_FDM (repaire d).stl
0.15 MiB 4 min
<1 m
4 x 4 x 10 Download
_98_button_d_FDM (repaire d).stl
0.13 MiB 9 min
<1 m
27 x 23 x 5 Download
_99_gears_plate_1_FDM (re paired).stl
0.92 MiB 10 h 31 min
6 m
131 x 130 x 15 Download
_100_gears_plate_2_FDM (r epaired).stl
0.92 MiB 9 h 47 min
5 m
135 x 130 x 15 Download
_101_axes_R_FDM (repaired ).stl
0.48 MiB 3 h 46 min
2 m
14 x 252 x 13 Download
_102_axes_L_FDM (repaired ).stl
0.48 MiB 3 h 45 min
2 m
14 x 252 x 13 Download
_103_leg_pin_a_R_FDM (rep aired).stl
0.06 MiB 6 min
<1 m
4 x 32 x 4 Download
_104_leg_pin_b_R_FDM (rep aired).stl
0.06 MiB 4 min
<1 m
4 x 21 x 4 Download
_105_leg_lock_R_FDM (repa ired).stl
0.11 MiB 16 min
<1 m
11 x 8 x 17 Download
_106_leg_1_R_FDM (repaire d).stl
3.35 MiB 1 h 18 min
1 m
99 x 27 x 10 Download
_107_leg_2_R_FDM (repaire d).stl
1.78 MiB 13 min
<1 m
70 x 8 x 4 Download
_108_leg_3_R_FDM (repaire d).stl
0.27 MiB 2 h 60 min
2 m
37 x 22 x 62 Download
_109_leg_pin_a_L_FDM (rep aired).stl
0.06 MiB 6 min
<1 m
Download
_110_leg_pin_b_L_FDM (rep aired).stl
0.06 MiB 4 min
<1 m
Download
_111_leg_lock_L_FDM (repa ired).stl
0.11 MiB 16 min
<1 m
Download
_112_leg_1_L_FDM (repaire d).stl
3.35 MiB 1 h 19 min
1 m
Download
_113_leg_2_L_FDM (repaire d).stl
1.78 MiB 12 min
<1 m
70 x 8 x 4 Download
_114_leg_3_L_FDM (repaire d).stl
0.26 MiB 2 h 59 min
2 m
Download
_115_cap_center_FDM (repa ired).stl
2.00 MiB 4 h 7 min
2 m
57 x 77 x 11 Download
_116_cap_front_R_FDM (rep aired).stl
0.34 MiB 7 h 36 min
6 m
141 x 42 x 23 Download
_117_cap_back_R_FDM (repa ired).stl
0.54 MiB 7 h 41 min
6 m
141 x 42 x 23 Download
_118_cap_front_L_FDM (rep aired).stl
0.34 MiB 7 h 41 min
6 m
141 x 42 x 23 Download
_119_cap_back_L_FDM (repa ired).stl
0.54 MiB 7 h 45 min
6 m
141 x 42 x 23 Download
_120_cap_R_FDM (repaired) .stl
0.13 MiB 42 min
<1 m
21 x 42 x 15 Download
_121_cap_L_FDM (repaired) .stl
0.12 MiB 42 min
<1 m
21 x 42 x 15 Download
_122_gun_back_a_FDM (repa ired).stl
2.02 MiB 1 h 44 min
1 m
30 x 30 x 33 Download
_123_gun_back_b_FDM (repa ired).stl
1.05 MiB 1 h 6 min
<1 m
28 x 7 x 46 Download
_124_gun_front_R_FDM (rep aired).stl
1.52 MiB 1 h 46 min
1 m
Download
_125_gun_front_L_FDM (rep aired).stl
1.52 MiB 1 h 45 min
1 m
37 x 37 x 36 Download
_126_panel_bot_1_FDM (rep aired).stl
0.27 MiB 50 min
<1 m
26 x 62 x 5 Download
_127_panel_bot_2_FDM (rep aired).stl
0.59 MiB 1 h 50 min
1 m
54 x 71 x 7 Download
_128_panel_bot_3_FDM (rep aired).stl
1.00 MiB 1 h 22 min
1 m
Download
_129_panel_front_1_R_FDM (repaired).stl
0.37 MiB 23 min
<1 m
6 x 49 x 9 Download
_130_panel_front_1_L_FDM (repaired).stl
0.37 MiB 23 min
<1 m
6 x 49 x 9 Download
_131_panel_front_2_R_FDM (repaired).stl
0.14 MiB 10 min
<1 m
14 x 14 x 6 Download
_132_panel_front_2_L_FDM (repaired).stl
0.14 MiB 10 min
<1 m
14 x 14 x 6 Download
_133_panel_front_3_FDM (r epaired).stl
0.03 MiB 9 min
<1 m
14 x 19 x 4 Download
_134_panel_cabine_R_FDM ( repaired).stl
0.40 MiB 12 min
<1 m
40 x 19 x 4 Download
_135_panel_cabine_L_FDM ( repaired).stl
0.40 MiB 11 min
<1 m
40 x 19 x 4 Download
_136_cabine_window_FDM (r epaired).stl
3.22 MiB 5 h 36 min
2 m
Download
_137_back_panel_R_FDM (re paired).stl
4.58 MiB 43 h 5 min
25 m
131 x 130 x 82 Download
_138_back_panel_L_FDM (re paired).stl
4.58 MiB 43 h 3 min
25 m
131 x 130 x 82 Download
_139_back_panel_1_FDM (re paired).stl
1.41 MiB 10 h 10 min
6 m
74 x 68 x 38 Download
_140_back_panel_2_FDM (re paired).stl
2.01 MiB 2 h 38 min
1 m
31 x 55 x 23 Download
_141_cockpit_panels_1_FDM (repaired).stl
2.14 MiB 25 min
<1 m
22 x 10 x 21 Download
_142_cockpit_panel_2_R_FD M (repaired).stl
0.06 MiB 38 min
<1 m
22 x 10 x 32 Download
_143_cockpit_panel_2_L_FD M (repaired).stl
0.06 MiB 38 min
<1 m
22 x 10 x 32 Download
_144_cockpit_seats_a_x4_F DM (repaired).stl
0.04 MiB 37 min
<1 m
13 x 22 x 32 Download
_145_cockpit_seats_b_x2_F DM (repaired).stl
0.68 MiB 25 min
<1 m
11 x 13 x 29 Download
_146_cockpit_seats_c_x12_ FDM (repaired).stl
0.82 MiB 30 min
<1 m
15 x 14 x 22 Download
_147_cockpit_panel_3_R_FD M (repaired).stl
0.13 MiB 37 min
<1 m
14 x 23 x 22 Download
_148_cockpit_panel_3_L_FD M (repaired).stl
0.13 MiB 37 min
<1 m
14 x 23 x 22 Download
_149_cockpit_box_FDM (rep aired).stl
1.68 MiB 1 h 13 min
1 m
22 x 22 x 22 Download
_150_Ge_lock_10H_x214_FDM (repaired).stl
0.03 MiB 4 min
<1 m
Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
Download
Tag (repaired).stl
1.70 MiB 1 h 18 min
1 m
Download
_7_body_top_FDM (repaired ).stl
2.96 MiB 51 h 17 min
44 m
176 x 66 x 152 Download
_10_body_2_R_FDM (repaire d).stl
6.06 MiB 63 h 5 min
38 m
170 x 143 x 145 Download
_136_cabine_window_FDM_v2 (repaired).stl
4.36 MiB 5 h 30 min
3 m
147 x 32 x 83 Download

ABOUT THIS 3D MODEL

The Lambda-class T-4a shuttle, also simply known as the Imperial Shuttle, was a multi-purpose vessel of the Imperial fleet. Elegant and deadly, Imperial Lambdas were often used as a transportation means for Stormtroopers and cargo, although even Emperor Palpatine and Darth Vader sometimes travelled in their own private units. Unlike similar ships from the Imperial fleet, shuttles of the Lambda-class are equipped with a hyperdrive which makes them so popular with high-ranking officers and Star Wars fans all around the world.

The 3D printing model of Imperial Shuttle by our contributing 3D artist perfectly conveys the elegance and swiftness of the versatile vehicle. The model features the craft’s trademark three wings: a stationary dorsal stabiliser and two articulated flanking side wings. The 3D printing Lambda-class shuttle is heavily armed with a pair of forward-facing double blaster cannons, two wing-mounted poseable cannons, and a powerful aft laser cannon. Recreate the exciting scenes from the classic Star Wars trilogy by adding the 3D printed Imperial Shuttle to your fleet!

ADAPTATION FOR 3D PRINTING

Imperial Shuttle for 3D printing is an active assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 48 hours in total. 

For you to receive the cleanest 3D printing result possible and to minimize the amount of filament needed for generated support the spacecraft model was divided into many assembly parts, and special mechanisms were introduced into all model’s movable elements to give you an opportunity to display Imperial Shuttle in a variety of positions and scenes.

All assembly parts in FFF/FDM version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly video” and "Assembly Manual" before getting down to the Imperial Shuttle model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the actual length of the Imperial Shuttle which is 20000 mm. The 3D printing model's chosen scale is 1:34 for the FFF/FDM version and 1:68 for the DLP/SLA/SLS version.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 150 parts;
- A printed ship is 680 mm tall, 443 mm wide, 588 mm deep;
Highly-detailed spacious interior and elaborate exterior of the shuttle;
- The cockpit glass and rear main drive unit lids are provided separately to be printed with the transparent filament;
- Fully articulated landing gear can be extended via opening undercarriage hatches;
Forward blaster cannons rotate, wing-mounted cannons are poseable, aft blaster cannon rotates counter-clockwise, while rear cannon barrels move independently as well;
Boarding ramp can be opened and extended;
- Simultaneous movement of side wings (stabilisers) is ensured by the highly advanced system of gears;
- In order to unfold the wings you will need to pull the locker (see photo preview section);
- In order to fold the wings you will need to rotate the rear cannon clockwise;
- The assembly of the side wings locker requires one regular ball pen spring;
- Shuttle's assembly requires additional "pins" that can be made out of short pieces of regular 1.75mm filament;
- Model is made hollow for you to introduce LED wiring and light up the cockpit and the main drive unit; a spot to hide the battery is provided inside the body;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 133 parts;
- A printed ship is 340 mm tall, 221 mm wide, 294 mm deep;
Highly-detailed interior and elaborate exterior of the shuttle;
- The cockpit glass and rear main drive unit lids are provided separately to be printed with the transparent material;
- Fully articulated landing gear can be extended via opening undercarriage hatches;
Forward blaster cannons rotate and wing-mounted cannons are poseable;
Boarding ramp can be opened and extended;
- Simultaneous movement of side wings (stabilisers) is ensured by the highly advanced system of gears;
- In order to fold/unfold the wings you will need to rotate the rear cannon;
- Shuttle's assembly requires additional "pins" that can be made out of short pieces of a regular paperclip;
- Model is made hollow for you to introduce LED wiring and light up the cockpit and the main drive unit; a spot to hide the battery is provided inside the body;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

You can get the model of Imperial Shuttle for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Imperial Shuttle 3D Printing Model at Gambody YouTube channel.

Also, you may like other Star Wars 3D Printing Models, as well as other Space Ships 3D Printing Models.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

Note:
- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Quality
Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill 
Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Material 
Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at support@gambody.com)

Speed 

You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Travel 
Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings