Premium Stock

Transformers 5 Megatron 3D Printing Model | Assembly

cm: 19.55 w x 19.55 d x 24.46 h
in: 7.697 w x 7.697 d x 9.63 h

Source Files




Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
32.23 MiB 28 h 14 min 17 m 103 x 62 x 140 Download
21.81 MiB 16 h 20 min 10 m 90 x 52 x 68 Download
24.75 MiB 60 min 1 m 24 x 31 x 23 Download
4_Megatron_Hand L.stl
21.51 MiB 2 h 31 min 1 m 28 x 27 x 68 Download
5_Megatron_Hand R.stl
22.17 MiB 2 h 34 min 1 m 29 x 31 x 66 Download
23.85 MiB 1 h 41 min 1 m 56 x 23 x 66 Download
5.24 MiB 61 h 31 min 34 m 195 x 195 x 42 Download
20.75 MiB 3 h 29 min 2 m 34 x 40 x 106 Download
24.66 MiB 3 h 22 min 2 m 8 x 184 x 56 Download
Megatron_Conneсtor big.s tl
2.12 MiB 8 min <1 m 5 x 30 x 5 Download
Megatron_Conneсtor small .stl
2.12 MiB 5 min <1 m 4 x 22 x 4 Download

Here comes a new Megatron 3D Printing Model from Transformers: The Last Knight movie - the fifth part of Transformers franchise. It tells about Autobots - alien humanoid machines from far-away planet Cybertron. 

Megatron is Decepticons' clan leader and the main antagonist of the franchise. Once he ruled over Cybertron together with Optimus Prime, who later became Autobots' leader. But then he appeared to be that type of a ruler who took things away from his partials. Optimus Prime wasn’t OK with this and the war started. During the conflict Cybertron was destroyed and Megatron became obsessed with killing Optimus Prime and headed to the Earth.

If you watched the previous titles, you should remember the number of times Megatron was damaged, wounded, he even was considered to be killed a couple of times. But Decepticons' leader always finds a way to stay alive. He is described as a technically perfect machine, with an enormous IQ and great physical strength. 

Megatron Model for 3D Printing shows all his strength and power. The model is made as much alike its prototype as possible. The armor and weapons of the figurine are highly detailed.

This model requires assembling. It is split into nine pieces. That allows reducing the amount of plastic spent, and your printer won’t create extra support for overhangs. Even though one doesn’t print the base, the model will keep its balance and won’t fall over when standing on its feet.

Watch how to assemble Megatron 3D Printing figurine in the tutorial video at Gambody YouTube channel.

After being 3D printed, the 3D model with the support base will stand 195.47 mm wide, 244.55 mm tall, and 195.47 mm deep. Without the base: 108.08 mm wide, 205.14 mm tall, and 61.86 mm deep.

Buy Transformers: The Last Knight Megatron 3D Model right now! Just click the green Buy button in the top-right corner of the model's page. You can pay with PayPal or your credit card.

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?


This model was tested in Cura 2.3.1. To avoid printing problems, we recommend the following settings:


Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm


Wall Thickness: 0.8 mm
Wall Line Count: 2
Top/Bottom Thickness: 0.8 mm
Top Thickness: 0.8 mm
Top Layers: 8
Bottom Thickness: 0.8 mm
Bottom Layers: 8
Top/Bottom Pattern: Lines
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
Compensate Outer Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check
Horizontal Expansion: 0 mm
Z Seam Alignment: Shortest


Infill Density: 25%
Infill Line Distance: 3.2 mm
Infill Pattern: Grid
Infill Overlap Percentage: 10%
Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 0
Infill Before Walls: Check


Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Standby Temperature: 175°C
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
Nozzle Switch Retract Speed: 20 mm/s
Nozzle Switch Prime Speed: 20 mm/s


Print Speed: 60 mm/s
Infill Speed: 80 mm/s
Wall Speed: 30 mm/s
Outer Wall Speed: 30 mm/s
Inner Wall Speed: 60 mm/s
Top/Bottom Speed 15 mm/s
Support Speed: 60 mm/s
Support Infill Speed: 60 mm/s
Travel Speed: 120 mm/s
Initial Layer Speed: 15 mm/s
Initial Layer Print Speed: 15 mm/s
Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed 15 mm/s
Maximum Z Speed: 0 mm/s


Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm


Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Regular Fan Speed at Height: 0.3 mm
Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s


Enable Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 30 %
Support Line Distance: 1.3333 mm
Support Z Distance: 0.1 mm
Support Top Distance: 0.1 mm
Support Bottom Distance: 0.1 mm
Support X/Y Distance: 0.7 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.2 mm
Support Stair Step Height: 0.3 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion

Build Plate Adhesion Type: Brim
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
Brim Line Count: 20
Brim Only on Outside: Check

Mesh Fixes

Union Overlapping Volumes: Check

Special Modes

Print Sequence: All at Once
Surface Mode: Normal


Extra Skin Wall Count: 0

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.


comments powered by Disqus

Similar items

Browse more newly listed 3D printings