Premium Stock

MWO Locust Weapon Pack for 3D Printing | Assembly

cm: 1.3 w x 4.3 d x 2.9 h
in: 0.512 w x 1.693 d x 1.142 h

Source Files




Printing Details

This Weapon Pack for 3D Printing consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

MWO Locust Weapon Pack for 3D Printing comes in 1 version for FFF/FDM 3D printers. Files for 3D printing are available for download after the purchase.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_a1_R (repaired).stl
0.15 MiB 3 min <1 m 5 x 8 x 4 Download
2_a2_R (repaired).stl
0.21 MiB 3 min <1 m 5 x 8 x 4 Download
3_b1_R (repaired).stl
0.16 MiB 20 min <1 m 10 x 8 x 36 Download
4_c1_R (repaired).stl
0.72 MiB 48 min <1 m 14 x 24 x 37 Download
5_c2_R (repaired).stl
1.72 MiB 50 min <1 m 14 x 25 x 37 Download
6_c3_R (repaired).stl
1.94 MiB 52 min <1 m 14 x 27 x 37 Download
7_c4_R (repaired).stl
0.95 MiB 51 min <1 m 14 x 26 x 37 Download
8_c5_R (repaired).stl
0.73 MiB 1 h 5 min 1 m 14 x 42 x 37 Download
9_c6_R (repaired).stl
1.73 MiB 1 h 7 min 1 m 14 x 43 x 37 Download
10_c7_R (repaired).stl
1.93 MiB 1 h 8 min 1 m 14 x 43 x 37 Download
11_c8_R (repaired).stl
0.93 MiB 1 h 6 min 1 m 14 x 42 x 37 Download
12_d1_R (repaired).stl
0.46 MiB 35 min <1 m 13 x 24 x 30 Download
13_d2_R (repaired).stl
0.48 MiB 53 min <1 m 13 x 42 x 30 Download
14_e1_R (repaired).stl
0.51 MiB 34 min <1 m 13 x 24 x 29 Download
15_e2_R (repaired).stl
0.47 MiB 34 min <1 m 13 x 24 x 29 Download
16_e3_R (repaired).stl
1.51 MiB 36 min <1 m 13 x 25 x 29 Download
17_e4_R (repaired).stl
1.47 MiB 35 min <1 m 13 x 25 x 29 Download
18_e5_R (repaired).stl
0.53 MiB 51 min <1 m 13 x 42 x 29 Download
19_e6_R (repaired).stl
0.48 MiB 51 min <1 m 13 x 42 x 29 Download
20_e7_R (repaired).stl
1.52 MiB 52 min <1 m 13 x 43 x 29 Download
21_e8_R (repaired).stl
1.48 MiB 52 min <1 m 13 x 43 x 29 Download
22_a1_L (repaired).stl
0.15 MiB 3 min <1 m 5 x 8 x 4 Download
23_a2_L (repaired).stl
0.21 MiB 3 min <1 m 5 x 8 x 4 Download
24_b1_L (repaired).stl
0.16 MiB 19 min <1 m 10 x 8 x 36 Download
25_c1_L (repaired).stl
0.72 MiB 49 min <1 m 14 x 24 x 37 Download
26_c2_L (repaired).stl
1.71 MiB 51 min <1 m 14 x 25 x 37 Download
27_c3_L (repaired).stl
1.94 MiB 55 min <1 m 14 x 27 x 37 Download
28_c4_L (repaired).stl
0.95 MiB 52 min <1 m 14 x 26 x 37 Download
29_c5_L (repaired).stl
0.73 MiB 1 h 4 min 1 m 14 x 42 x 37 Download
30_c6_L (repaired).stl
1.73 MiB 1 h 5 min 1 m 14 x 43 x 37 Download
31_c7_L (repaired).stl
1.93 MiB 1 h 7 min 1 m 14 x 43 x 37 Download
32_c8_L (repaired).stl
0.93 MiB 1 h 5 min 1 m 14 x 42 x 37 Download
33_d1_L (repaired).stl
0.46 MiB 35 min <1 m 13 x 24 x 30 Download
34_d2_L (repaired).stl
0.48 MiB 53 min <1 m 13 x 42 x 30 Download
35_e1_L (repaired).stl
0.51 MiB 34 min <1 m 13 x 24 x 29 Download
36_e2_L (repaired).stl
0.47 MiB 33 min <1 m 13 x 24 x 29 Download
37_e3_L (repaired).stl
1.51 MiB 36 min <1 m 13 x 25 x 29 Download
38_e4_L (repaired).stl
1.47 MiB 36 min <1 m 13 x 25 x 29 Download
39_e5_L (repaired).stl
0.53 MiB 50 min <1 m 13 x 42 x 29 Download
40_e6_L (repaired).stl
0.48 MiB 50 min <1 m 13 x 42 x 29 Download
41_e7_L (repaired).stl
1.52 MiB 51 min <1 m 13 x 43 x 29 Download
42_e8_L (repaired).stl
1.48 MiB 51 min <1 m 13 x 43 x 29 Download


MWO Locust is a 20-ton Battletech classic with powerful hind legs that is able to outrun most enemies by leaping vigorously and taking advantage of its phenomenal speed. The smallest Mech ever built might not be able to carry armament comparable to Mechs with heavier chassis weight but easily makes up for a small profile by an abundance of speed. Tiny and always ready to spring into action, Locust climbs with ease slopes that other robots won’t dare approach. And if you were looking for a nice loadout to equip the 3D printed Locust to best advantage, this Weapon Pack for 3D printing offers everything for you to create your most desirable Locust build. The author of the MWO Locust model spent circa 32 hours to prepare all the weapons you may want to equip your speedy Mech with. Here is a full list of weapons array that comprises the pack and that you can mount your 3D printed Locust Mech’s hardpoints with:
   1. Medium Lasers
   2. Small Lasers
   3. LRM 5 launchers (Long Range Missiles)
   4. Streak SRM 2 (Short Range Missiles)
   5. Machine Guns
Choose your favourite weapons assortment for Locust and set off for the next strike mission with your preferred variant of the light Mech. More weapon packs to switch between other BattleMechs’ variants are stored in Gambody’s rich MWO collection for 3D printing.


MWO Locust Weapon Pack for 3D Printing is a set of weapons of different types that can be used to assemble various Locust variants. The whole moderation process and adaptation of the weapon pack for different types of 3D printers took Gambody team 10 hours in total. Due to the design of the default loadout and hardpoints of the MWO Locust, every initial gun the Mech is equipped with can easily be replaced with the respective weapon from the pack. During the moderation process, it was made sure that having printed the weapons that comprise the kit you will be able to easily insert them into the corresponding slots of the Locust's specially designed hardpoints. Every weapon in the pack comes in STL file in a recommended position that was worked out in order to ensure the smoothness of the detail’s surface after printing and so that 3D printing beginners won't face difficulties when placing the part on a build plate. When downloading any kit's file you will also receive "Assembly Manual" for FFF/FDM 1.0 version in PDF format.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The weapon's scale was calculated from Locust's actual height that is 8000 mm. The 3D printing model's chosen scale is 1/60 for the FFF/FDM version.


FFF/FDM 1.0 version features:
- Contains 42 parts;
- The pack is comprised of loadout weapon options to assemble the following Locust variants
   1. LCT-1V
   2. LCT-3M
   3. LCT-3S
   4. LCT-1E
   5. LCT-1M
   6. LCT-PB
   7. LCT-3V
   8. LCT-1E(C) etc.
- All parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing;
- Once printed every weapon from the pack can be inserted into its designated place to modify the MWO Locust 3D Printing Model.


- STL files of MWO Locust Weapon Pack for 3D Printing​ which consist of 42 parts;
- 1 version of files of this weapon pack for FFF/FDM printers;
- High-poly detailed model of MWO Locust Weapon Pack;
Assembly Manual for FFF/FDM 1.0 version in PDF format;
- Detailed settings that we provide as a recommendation for Cura , Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get Weapon Pack for MWO Locust for 3D Printing​ immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble MWO Locust Weapon Pack for 3D Printing​ at Gambody YouTube channel.

Also, you may like other Mech Warrior 3D Printing Models.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?


This model was tested in Cura 3.4.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

To avoid printing problems, we recommend the following settings:

Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s

Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 3 mm
Support Z Distance: 0.1 mm
    Support Top Distance: 0.1 mm
    Support Bottom Distance: 0.1 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
  Detect thin walls: Check
  Detect bridging perimeters: Check
  Seam position: Random
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
  Infill/Perimeters overlap: 20%
  Bridge flow ratio: 0.95
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm


comments powered by Disqus

Similar items

Browse more newly listed 3D printings