Make pre-order

Robby the Robot 3D Printing Model | Assembly + Action

average
cm: 15.6 w x 16.8 d x 26.4 h
in: 6.142 w x 6.614 d x 10.394 h

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

- 3 versions of Robby the Robot STL files for FFF/FDM and DLP/SLA/SLS - files for all versions are available for download after the purchase

- STL files of high-poly Robby the Robot 3D Model for 3D printing consist of 125 parts
- Sizes:
FFF/FDM: 264 mm tall, 156 mm wide, 168 mm deep
DLP/SLA/SLS: 132 mm tall, 78 mm wide, 84 mm deep

Assembly Manual for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format
- Detailed settings that we provide as a recommendation for Cura, Simplify3D and Slic3r for the best print
- Full technical support from the Gambody Support Team

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
_1_foot_R (repaired).stl
9.88 MiB 3 h 46 min
2 m
37 x 52 x 51 Download
_2_foot_connector_1_R_FDM (repaired).stl
0.29 MiB 28 min
<1 m
11 x 39 x 11 Download
_3_foot_connector_2_R_FDM (repaired).stl
0.77 MiB 3 min
<1 m
11 x 6 x 4 Download
_4_foot_connector_3_R_FDM (repaired).stl
0.58 MiB 4 min
<1 m
9 x 9 x 3 Download
_5_foot_connector_4_R_FDM (repaired).stl
0.55 MiB 21 min
<1 m
11 x 28 x 11 Download
_6_leg_a_R_FDM (repaired) .stl
9.61 MiB 3 h 37 min
2 m
36 x 37 x 56 Download
_7_leg_b_R_FDM (repaired) .stl
2.42 MiB 50 min
1 m
17 x 43 x 14 Download
_8_leg_conncetor_1_R_FDM (repaired).stl
1.03 MiB 3 min
<1 m
12 x 5 x 3 Download
_9_leg_conncetor_2_R_FDM (repaired).stl
0.47 MiB 6 min
<1 m
10 x 10 x 3 Download
_10_leg_conncetor_3_R_FDM (repaired).stl
0.28 MiB 9 min
<1 m
15 x 17 x 5 Download
_11_foot_L (repaired).stl
9.88 MiB 3 h 46 min
2 m
37 x 52 x 51 Download
_12_foot_connector_1_L_FD M (repaired).stl
0.29 MiB 28 min
<1 m
11 x 39 x 11 Download
_13_foot_connector_2_L_FD M (repaired).stl
0.77 MiB 4 min
<1 m
11 x 6 x 4 Download
_14_foot_connector_3_L_FD M (repaired).stl
0.58 MiB 4 min
<1 m
9 x 9 x 3 Download
_15_foot_connector_4_L_FD M (repaired).stl
0.55 MiB 21 min
<1 m
11 x 28 x 11 Download
_16_leg_a_L_FDM (repaired ).stl
9.61 MiB 3 h 37 min
2 m
36 x 37 x 56 Download
_17_leg_b_L_FDM (repaired ).stl
2.42 MiB 50 min
1 m
17 x 43 x 14 Download
_18_leg_conncetor_1_L_FDM (repaired).stl
1.03 MiB 3 min
<1 m
12 x 5 x 3 Download
_19_leg_conncetor_2_L_FDM (repaired).stl
0.47 MiB 6 min
<1 m
10 x 10 x 3 Download
_20_leg_conncetor_3_L_FDM (repaired).stl
0.28 MiB 10 min
<1 m
15 x 17 x 5 Download
_21_pelvis_FDM (repaired) .stl
28.66 MiB 7 h 16 min
4 m
65 x 56 x 45 Download
_22_body_FDM (repaired).s tl
32.79 MiB 24 h 19 min
16 m
88 x 88 x 50 Download
_23_body_connector_1_x2_F DM (repaired).stl
1.03 MiB 5 min
<1 m
8 x 16 x 4 Download
_24_body_connector_2_x2_F DM (repaired).stl
0.09 MiB 22 min
<1 m
22 x 24 x 7 Download
_25_body_connector_3_x2_F DM (repaired).stl
0.47 MiB 11 min
<1 m
15 x 14 x 4 Download
_26_body_connector_4_x2_F DM (repaired).stl
0.39 MiB 23 min
<1 m
22 x 24 x 8 Download
_27_body_cap_FDM (repaire d).stl
4.13 MiB 1 h 34 min
1 m
30 x 37 x 12 Download
_28_body_cap_light_L_FDM (repaired).stl
0.40 MiB 5 min
<1 m
9 x 9 x 4 Download
_29_body_cap_light_R_FDM (repaired).stl
0.35 MiB 6 min
<1 m
9 x 9 x 6 Download
_30_head_FDM (repaired).s tl
43.05 MiB 13 h 54 min
8 m
Download
_31_head_grid_FDM (repair ed).stl
13.43 MiB 1 h 47 min
1 m
65 x 15 x 24 Download
_32_head_window_FDM (repa ired).stl
19.00 MiB 4 h 12 min
3 m
Download
_33_head_knobs_R_FDM (rep aired).stl
2.61 MiB 18 min
<1 m
12 x 18 x 9 Download
_34_head_knobs_L_FDM (rep aired).stl
2.61 MiB 18 min
<1 m
12 x 18 x 9 Download
_35_head_pipe_a_1_R_FDM ( repaired).stl
2.42 MiB 34 min
<1 m
Download
_36_head_pipe_a_2_R_FDM ( repaired).stl
1.59 MiB 8 min
<1 m
7 x 7 x 15 Download
_37_head_pipe_a_3_R_FDM ( repaired).stl
1.59 MiB 10 min
<1 m
Download
_38_head_pipe_a_4_R_FDM ( repaired).stl
3.80 MiB 17 min
<1 m
Download
_39_head_pipe_a_5_R_FDM ( repaired).stl
0.57 MiB 5 min
<1 m
26 x 17 x 3 Download
_40_head_pipe_a_1_L_FDM ( repaired).stl
2.54 MiB 34 min
<1 m
Download
_41_head_pipe_a_2_L_FDM ( repaired).stl
1.59 MiB 9 min
<1 m
7 x 7 x 15 Download
_42_head_pipe_a_3_L_FDM ( repaired).stl
1.59 MiB 8 min
<1 m
Download
_43_head_pipe_a_4_L_FDM ( repaired).stl
3.80 MiB 17 min
<1 m
Download
_44_head_pipe_a_5_L_FDM ( repaired).stl
0.57 MiB 6 min
<1 m
17 x 30 x 3 Download
_45_head_lever_1_FDM (rep aired).stl
0.13 MiB 5 min
<1 m
Download
_46_head_lever_2_FDM (rep aired).stl
0.13 MiB 5 min
<1 m
Download
_47_head_light_1_FDM (rep aired).stl
2.11 MiB 17 min
<1 m
Download
_48_head_light_2_FDM (rep aired).stl
1.00 MiB 3 min
<1 m
5 x 5 x 8 Download
_49_head_light_3_FDM (rep aired).stl
4.19 MiB 10 min
<1 m
Download
_50_head_light_4_FDM (rep aired).stl
4.19 MiB 10 min
<1 m
Download
_51_head_light_5_FDM (rep aired).stl
4.19 MiB 10 min
<1 m
Download
_52_head_engine_FDM (repa ired).stl
1.95 MiB 44 min
<1 m
Download
_53_head_engine_pipe_1_R_ FDM (repaired).stl
0.45 MiB 7 min
<1 m
4 x 22 x 7 Download
_54_head_engine_pipe_1_L_ FDM (repaired).stl
0.45 MiB 7 min
<1 m
4 x 22 x 7 Download
_55_head_engine_pipe_2_R_ FDM (repaired).stl
0.46 MiB 10 min
<1 m
Download
_56_head_engine_pipe_2_L_ FDM (repaired).stl
0.46 MiB 10 min
<1 m
Download
_57_head_engine_pipe_3_FD M (repaired).stl
0.97 MiB 10 min
<1 m
Download
_58_head_engine_light_R_F DM (repaired).stl
0.34 MiB 2 min
<1 m
Download
_59_head_engine_light_L_F DM (repaired).stl
0.34 MiB 3 min
<1 m
Download
_60_arm_connector_1_R_FDM (repaired).stl
1.05 MiB 6 min
<1 m
Download
_61_arm_connector_2_R_FDM (repaired).stl
0.47 MiB 11 min
<1 m
Download
_62_arm_connector_3_R_FDM (repaired).stl
0.12 MiB 30 min
<1 m
Download
_63_arm_R_FDM (repaired). stl
13.07 MiB 2 h 45 min
2 m
Download
_64_wrist_R_FDM (repaired ).stl
6.85 MiB 52 min
<1 m
19 x 17 x 42 Download
_65_arm_connector_1_L_FDM (repaired).stl
1.05 MiB 6 min
<1 m
8 x 21 x 4 Download
_66_arm_connector_2_L_FDM (repaired).stl
0.47 MiB 11 min
<1 m
15 x 14 x 4 Download
_67_arm_connector_3_L_FDM (repaired).stl
0.12 MiB 30 min
<1 m
Download
_68_arm_L_FDM (repaired). stl
13.07 MiB 2 h 46 min
2 m
Download
_69_wrist_L_FDM (repaired ).stl
6.85 MiB 51 min
<1 m
19 x 17 x 42 Download
_70_platform (repaired).s tl
19.00 MiB 17 h 1 min
9 m
Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min
1 m
150 x 18 x 5 Download

ABOUT THIS 3D MODEL

Robby the Robot is a real science fiction icon with a Hollywood career so long and distinguished that other robots may now be green with envy! The impressive and extremely expensive robot prop first appeared in the 1956 MGM film Forbidden Planet and quickly achieved iconic status, with the film becoming a cult sci-fi classic. The mechanical servant of the mysterious Dr Morbius was one of the first movie robots to play an actual well-developed supporting character with distinct personality! No wonder Robby the Robot still appears in modern films and television shows to the delight of sci-fi fans.

Gambody’s contributing 3D artist dedicated circa 135 hours to the creation of the 3D printing Robby the Robot model that sports all the character’s trademark features. Robby’s legs are made out of large interlocking globes and a tall dome covers his highly detailed head with two cute scanner rings located to resemble the robot’s ears. The unmistakable star of the robot Hall of Fame, Robby the Robot secured for himself a fixed place in the film history and in fans’ hearts. Now the iconic robot can join your 3D printed selection!

ADAPTATION FOR 3D PRINTING

Robby the Robot for 3D printing is a highly detailed action assembly figurine and its moderation and adaptation for different types of 3D printers took the Gambody team 57 hours in total. 

In order to preserve the accurate likeness of the iconic sci-fi star, the model was divided into many parts that are to be assembled as if a real robot. Taking into account the willingness of our customers to make their 3D printing projects as detailed as possible, Gambody team worked on the highly-articulated assembly of the Robby the Robot that presupposes a variety of movable elements (please, see "Versions' specifications", "Assembly video" and photo preview slider). 

The cutting of the model was chosen to ensure the cleanest 3D printing result possible and to minimize the amount of material needed to print the generated support. All assembly parts are provided in STL files of FFF/FDM version in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. We highly recommend that you get acquainted with the “Assembly video” and "Assembly Manual" before getting down to the Robby the Robot model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the height of the Robby the Robot which is 2100 mm. The 3D printing model's chosen scale is 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS version.

VERSIONS' SPECIFICATIONS

FFF/FDM Advanced 1.0 version features:
- this version is cut into maximum assembly parts which allows the introduction of complex articulation mechanisms;
- Contains 70 parts;
- A printed model is 264 mm tall, 156 mm wide, 168 mm deep;
- Comes with a platform that resembles the surface of the Forbidden Planet;
- You can light up the model's dome lamp, "eyes" (two illuminated parts of the mechanical brain), voice tubes behind the front grille, and rotating devices on the indicator panel ("belly");
- The body and head are hollow for you to conceal the LED wiring and battery;
- It is recommended that you print the robot's dome, "eyes" (two illuminated parts of the mechanical brain), the front grille, and parts of the dome lamp with transparent filament;
- Robot's knees bend + hip and shoulder joints move up and down via an articulated mechanism with a ratchet;
- The wrists rotate on a peg, while the body and head rotate via a ratchet mechanism;
- Scanner rings and scanner fins ("ears") on the model's head are articulated; 
- The gyroscope on top of Robby's head rotates, as well as the valves under it;
- Start drive and Geneva movement device on the indicator panel ("belly") rotate as well;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

FFF/FDM Basic 1.0 version features:
- this version is adapted for FDM but is simplified in terms of cutting and articulation;
- Contains 36 parts;
- A printed model is 264 mm tall, 156 mm wide, 168 mm deep;
- Comes with a platform that resembles the surface of the Forbidden Planet;
- You can light up the model's dome lamp, "eyes" (two illuminated parts of the mechanical brain), voice tubes behind the front grille, and rotating devices on the indicator panel ("belly");
- The body and head are hollow for you to conceal the LED wiring and battery;
- It is recommended that you print the robot's dome, "eyes" (two illuminated parts of the mechanical brain), the front grille, and parts of the dome lamp with transparent filament;
- The robot's body, head, shoulders and wrists rotate on a peg;
- Scanner rings and scanner fins ("ears") on the model's head are articulated; 
- The gyroscope on top of Robby's head rotates, as well as the valves under it;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 19 parts;
- A printed model is 132 mm tall, 78 mm wide, 84 mm deep;
- Comes with a platform that resembles the surface of the Forbidden Planet;
- You can light up the model's dome lamp, "eyes" (two illuminated parts of the mechanical brain), voice tubes behind the front grille, and rotating devices on the indicator panel ("belly");
- The body and head are hollow for you to conceal the LED wiring and battery;
- It is recommended that you print robot's dome, "eyes" (two illuminated parts of the mechanical brain), the front grille, and the dome lamp with transparent filament;
- The robot's body, head, shoulders and wrists rotate on a peg;
- The gyroscope on top of Robby's head rotates, as well as the valves under it;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

You can get the model of Robby the Robot for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Robby the Robot 3D Printing Model at Gambody YouTube channel.

Also, you may like other Robot 3D Printing Models.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

Note:
- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Quality
Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill 
Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Material 
Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at support@gambody.com)

Speed 

You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Travel 
Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings