The Nux Car 3D Printing Model | Assembly + Action

cm: 12.6 w x 33.8 d x 23.1 h
in: 4.961 w x 13.307 d x 9.094 h

Source Files




Printing Details

This 3D Model of the Nux Car from Mad Max: Fury Road consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.
Before printing the files, we strongly recommend reading the PRINTING DETAILS section.


- 1 version of Chevrolet 5 Window Coupe 1934 "The Nux Car STL files for FFF/FDM 3D printers - the files of this version will be available for download after the purchase.

- STL files of high-poly Mad Max Nux Car 3D Model for 3D printing consist of 128 parts
- Size:
FFF/FDM: 231 mm tall, 126 mm wide, 338 mm deep

Assembly Manual for FFF/FDM 1.0 version in PDF format
- Detailed settings that we provide as a recommendation for Cura, Simplify3D and Slic3r for the best print
- Full technical support from the Gambody Support Team

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_back_platform_(repaired ).stl
17.82 MiB 1 h 53 min 1 m Download
2_back_platform_tube_left _(repaired).stl
1.60 MiB 21 min <1 m Download
3_back_platform_tube_righ t_(repaired).stl
1.60 MiB 21 min <1 m Download
5.87 MiB 38 min <1 m Download
4.49 MiB 40 min <1 m Download
1.70 MiB 6 min <1 m Download
7_body_pin#1_(repaired).s tl
0.00 MiB 9 min <1 m Download
8_body_pin#2_(repaired).s tl
0.00 MiB 5 min <1 m Download
9_body_pin#3_(repaired).s tl
0.00 MiB 3 min <1 m Download
10_body_pin#4_(repaired). stl
0.00 MiB 5 min <1 m Download
11_body_pin#5_(repaired). stl
0.00 MiB 2 min <1 m Download
12_body_pin#6_(repaired). stl
0.00 MiB 5 min <1 m Download
13_body_pin#7_(repaired). stl
0.00 MiB 9 min <1 m Download
14_body_pin#8_(repaired). stl
0.00 MiB 9 min <1 m Download
15_body_pin#9_(repaired). stl
0.00 MiB 4 min <1 m Download
16_body_pin#10_(repaired) .stl
0.00 MiB 4 min <1 m Download
17_car frame front_(repai red).stl
1.81 MiB 10 h 45 min 7 m Download
18_car_frame_pin#1_X2 (re paired).stl
0.00 MiB 5 min <1 m Download
19_car_frame_pin#2_X10_(r epaired).stl
0.01 MiB 1 min <1 m Download
20_car_frame_rear (repair ed).stl
0.58 MiB 5 h 20 min 3 m Download
21_door_handle_X2_(repair ed).stl
0.60 MiB 2 min <1 m Download
22_door_left_(repaired).s tl
4.90 MiB 1 h 35 min 1 m Download
23_door_left_glass_(repai red).stl
0.83 MiB 18 min <1 m Download
24_door_right_(repaired). stl
6.37 MiB 1 h 38 min 1 m Download
25_door_right_glass_(repa ired).stl
0.83 MiB 18 min <1 m Download
26_engine_air_filter_left _(repaired).stl
0.65 MiB 8 min <1 m Download
27_engine_air_filter_righ t_(repaired).stl
0.66 MiB 11 min <1 m Download
28_engine_air_intake_(rep aired).stl
0.92 MiB 29 min <1 m Download
29_engine_air_pipe#1_left _(repaired).stl
0.86 MiB 37 min <1 m Download
30_engine_air_pipe#2_left _(repaired).stl
0.78 MiB 10 min <1 m Download
31_engine_air_pipe_right_ (repaired).stl
0.95 MiB 34 min <1 m Download
32_engine_belt_(repaired) .stl
0.10 MiB 4 min <1 m Download
33_engine_detail#1_(repai red).stl
2.28 MiB 8 min <1 m Download
34_engine_detail#2_(repai red).stl
0.76 MiB 3 min <1 m Download
35_engine_exhaust_collect or_left_(repaired).stl
2.93 MiB 22 min <1 m Download
36_engine_exhaust_collect or_right_(repaired).stl
2.84 MiB 24 min <1 m Download
37_engine_exhaust_ connec tor_left_(repaired).stl
2.54 MiB 31 min <1 m Download
38_engine_exhaust_connect or_right_(repaired).stl
2.54 MiB 31 min <1 m Download
39_engine_exhaust_ pipe#1 _left_(repaired).stl
0.88 MiB 51 min <1 m Download
40_engine_exhaust_pipe#1_ right_(repaired).stl
0.76 MiB 25 min <1 m Download
41_engine_exhaust_pipe#2_ left_(repaired).stl
0.52 MiB 51 min <1 m Download
42_engine_exhaust_ pipe#2 _right_(repaired).stl
0.52 MiB 51 min <1 m Download
43_engine_exhaust_pipe_ti p_left_(repaired).stl
79.32 MiB 1 h 48 min 1 m Download
44_engine_exhaust_pipe_ti p_pin_X2_(repaired).stl
0.00 MiB 3 min <1 m Download
45_engine_exhaust_pipe_ti p_right_(repaired).stl
79.31 MiB 1 h 46 min 1 m Download
46_engine_fastening_back_ X2_(repaired).stl
0.03 MiB 6 min <1 m Download
47_engine_fastening_front _X2_(repaired).stl
0.03 MiB 6 min <1 m Download
48_engine_fastening_pin_X 4_(repaired).stl
0.08 MiB 1 min <1 m Download
49_engine_main_part_(repa ired).stl
20.59 MiB 3 h 19 min 2 m Download
50_engine_pallet_(repaire d).stl
1.96 MiB 40 min <1 m Download
51_engine_pallet_pin_X2_( repaired).stl
0.00 MiB 4 min <1 m Download
52_engine_sheave#1_(repai red).stl
0.73 MiB 4 min <1 m Download
53_engine_sheave#2_(repai red).stl
0.84 MiB 3 min <1 m Download
54_engine_sheave#3_(repai red).stl
0.84 MiB 4 min <1 m Download
55_engine_transmission_(r epaired).stl
18.38 MiB 35 min <1 m Download
56_engine_transmission_pa llet_(repaired).stl
1.51 MiB 8 min <1 m Download
57_engine_transmission_pa llet_pin_X2_(repaired).st l
0.01 MiB 1 min <1 m Download
58_engine_turbin_left_(re paired).stl
15.22 MiB 12 min <1 m Download
59_engine_turbin_right_(r epaired).stl
13.63 MiB 12 min <1 m Download
60_fender_left_(repaired) .stl
9.97 MiB 4 h 6 min 3 m Download
61_fender_right_(repaired ).stl
9.97 MiB 4 h 5 min 3 m Download
62_front_glass_(repaired) .stl
4.70 MiB 21 min <1 m Download
63_front_suspension_arm_b ottom_X2_(repaired).stl
3.11 MiB 13 min <1 m Download
64_front_suspension_arm_u p_X2_(repaired).stl
3.02 MiB 11 min <1 m Download
65_front_suspension_axis_ left_(repaired).stl
4.40 MiB 18 min <1 m Download
66_front_suspension_axis_ right_(repaired).stl
4.40 MiB 18 min <1 m Download
67_front_suspension_disk_ X2_(repaired).stl
1.63 MiB 1 h 13 min 1 m Download
68_front_suspension_lever _X2_(repaired).stl
0.04 MiB 7 min <1 m Download
69_front_suspension_sprin g_pin_X2_(repaired).stl
0.08 MiB 2 min <1 m Download
70_front_suspension_steer ing_beam_(repaired).stl
0.97 MiB 9 min <1 m Download
71_front_suspension_steer ing_beam_pin_X2_(repaired ).stl
0.08 MiB 1 min <1 m Download
72_front_suspension_tire_ X2_(repaired).stl
7.84 MiB 2 h 9 min 1 m Download
73_front_suspension_wheel _axis_X2_(repaired).stl
0.09 MiB 3 min <1 m Download
74_harpoon#1_nose_X2_(rep aired).stl
2.91 MiB 39 min <1 m Download
75_harpoon#1_trunk_X2_(re paired).stl
2.91 MiB 35 min <1 m Download
76_harpoon#2_nose_X2_(rep aired).stl
2.91 MiB 34 min <1 m Download
77_harpoon#2_trunk_X2_(re paired).stl
2.90 MiB 29 min <1 m Download
78_harpoon#3_trunk_X2_(re paired).stl
2.90 MiB 20 min <1 m Download
79_harpoon_tip_type_A_X6_ (repaired).stl
11.61 MiB 23 min <1 m Download
80_harpoon_tip_type_B_X4_ (repaired).stl
32.05 MiB 14 min <1 m Download
81_main_front_panel_(repa ired).stl
60.46 MiB 1 h 18 min 1 m Download
82_main_left_side_(repair ed).stl
58.31 MiB 22 h 3 min 15 m Download
83_main_right_side_(repai red).stl
80.29 MiB 22 h 13 min 14 m Download
84_nose_stend_(repaired). stl
3.80 MiB 2 h 54 min 1 m Download
85_nose_stend_big skull_( repaired).stl
54.59 MiB 53 min <1 m Download
86_nose_stend_pin_X4_(rep aired).stl
0.08 MiB 1 min <1 m Download
87_nose_stend_plane (repa ired).stl
41.69 MiB 1 h 9 min <1 m Download
88_nose_stend_small_skull _X2_(repaired).stl
1.18 MiB 3 min <1 m Download
89_pedal_accelerator_(rep aired).stl
0.91 MiB 9 min <1 m Download
90_pedal_brake_(repaired) .stl
1.20 MiB 9 min <1 m Download
91_radiator_(repaired).st l
8.92 MiB 1 h 44 min 1 m Download
92_radiator_tube_left_(re paired).stl
0.41 MiB 31 min <1 m Download
93_radiator_tube_right_(r epaired).stl
0.41 MiB 31 min <1 m Download
94_rear_suspension_axis_X 2_(repaired).stl
0.52 MiB 15 min <1 m Download
95_rear_suspension_cardan _(repaired).stl
0.01 MiB 11 min <1 m Download
96_rear_suspension_detail #1_left_(repaired).stl
0.06 MiB 10 min <1 m Download
97_rear_suspension_detail #1_right_(repaired).stl
0.06 MiB 10 min <1 m Download
98_rear_suspension_detail #2_left(repaired).stl
0.05 MiB 7 min <1 m Download
99_rear_suspension_detail #2_right_(repaired).stl
0.05 MiB 7 min <1 m Download
100_rear_suspension_disk_ X2_(repaired).stl
1.57 MiB 1 h 8 min 1 m Download
101_rear_suspension_pin_X 2_(repaired).stl
0.08 MiB 1 min <1 m Download
102_rear_suspension_reduc er_detail#1_(repaired).st l
0.41 MiB 27 min <1 m Download
103_rear_suspension_reduc er_detail#2_(repaired).st l
0.21 MiB 9 min <1 m Download
104_rear_suspension_reduc er_detail#3_(repaired).st l
0.26 MiB 4 min <1 m Download
105_rear_suspension_reduc er_pin_(repaired).stl
0.00 MiB 2 min <1 m Download
106_rear_suspension_sprin g_left_(repaired).stl
0.79 MiB 18 min <1 m Download
107_rear_suspension_sprin g_pin_X8_(repaired).stl
0.08 MiB 1 min <1 m Download
108_rear_suspension_sprin g_right_(repaired).stl
0.79 MiB 18 min <1 m Download
109_rear_suspension_tire_ X2_(repaired).stl
8.85 MiB 4 h 32 min 2 m Download
4.35 MiB 2 h 13 min 1 m Download
111_seat_type_A_(repaired ).stl
7.63 MiB 1 h 18 min 1 m Download
112_seat_type_B_detail#1_ (repaired).stl
3.99 MiB 1 h 3 min 1 m Download
113_seat_type_B_detail#2_ (repaired).stl
4.09 MiB 21 min <1 m Download
114_sun_roof_close_(repai red).stl
0.99 MiB 34 min <1 m Download
115_sun_roof_open_(repair ed).stl
3.64 MiB 10 min <1 m Download
116_tahometer_(repaired). stl
0.49 MiB 5 min <1 m Download
117_tail glass_(repaired) .stl
0.46 MiB 8 min <1 m Download
1.75 MiB 3 h 25 min 2 m Download
119_tank#2 (repaired).stl
3.10 MiB 1 h 14 min 1 m Download
120_tank#3_central_detail _(repaired).stl
0.29 MiB 30 min <1 m Download
121_tank#3_detail1_(repai red).stl
4.39 MiB 17 min <1 m Download
122_tank#3_detail2_(repai red).stl
1.48 MiB 13 min <1 m Download
1.86 MiB 1 h 6 min 1 m Download
1.30 MiB 5 min <1 m Download
125_transmission_clutcher _(repaired).stl
1.64 MiB 21 min <1 m Download
8.15 MiB 12 min <1 m Download
127_wheel_spindle_(repair ed).stl
0.25 MiB 5 min <1 m Download
128_window_grid_X2_(repai red).stl
0.73 MiB 6 min <1 m Download


Please welcome The Nux Car wonderfully modified hot rod of the brutal world from Mad Max: Fury Road.

The car driven by Nux is a Chevrolet 5 Window Coupe from 1934. Nux's car holds more mods and has "suicide doors" for its occupants. It also looks a bit meaner with the lifted suspension in the back. As for modes, this model is featured with an active leaf spring-like suspension, two sunroof options - open and closed, opening doors, rotating wheels, plus the synchronized turning of the front wheels, the construction of the front wheels’ mechanism, elaborate interior.

Our contributing author did a great job! This war-torn vehicle is super modified and certainly will make its impression on you, so what else do you really need in the desert except for a big engine and a machine gun anyways? Go ahead, and print it on your 3D printer!


The Nux Car for 3D printing is an active assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 95 hours in total. For you to receive the cleanest 3D printing result possible and to minimize the amount of filament needed for generated support, the desert monster car was divided into many assembly parts that are provided as separate STL files. And for you to create an impressive piece for display, our team equipped the model with an active suspension and lots of articulated elements that you can interact with.

All assembly parts are provided in STL files of FFF/FDM version in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won’t face difficulties when placing the parts on a build plate. When downloading any model’s file you will also receive “Assembly Manual” for FFF/FDM 1.0 version in PDF format. We highly recommend that you get acquainted with the “Assembly video” and “Assembly Manual” before getting down to the Nux Car model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model’s scale was calculated from the approximate length of the Nux Car which is 5408 mm. The 3D printing model’s chosen scale is 1:16 for the FFF/FDM version.


FFF/FDM 1.0 version features:
- Contains 128 parts;
- A printed model stands 231 mm tall, 126 mm wide, 338 mm deep;

-The active leaf spring-like suspension system allows bouncing motion of the car’s body;

- The active suspension can be assembled with regular ball pen springs for better shock-absorption or without them;

- Design of the front axle allows synchronized movement of front wheels;

- All wheels of the car rotate;

- Highly-detailed exterior of the car;

- Opening doors;
- Two sun roof options - open and closed;
- Elaborate interior;
- The windscreen comes as a separate assembly part to be printed with transparent material;

- You can display The Nux Car with or without the door windows 3D printed with transparent material;
- Assembly of the model requires additional “pins” that do not come in STL files but can be made out of short pieces of regular 1.75mm filament;
- All parts are divided in such a way that you will print them with the smallest number of support structures and assemble the complex vehicle with ease.

You can get the model of Mad Max Nux Car for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Nux Car 3D Printing Model at Gambody YouTube channel.

Also, you may like the War Rig for 3D printing or other Fiction 3D Printing Models.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at


You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
  Detect thin walls: Check
  Detect bridging perimeters: Check
  Seam position: Random
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
  Infill/Perimeters overlap: 20%
  Bridge flow ratio: 0.95
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm


comments powered by Disqus

Similar items