Make pre-order

Gigahorse 3D Printing Model | Assembly + Active

big
cm: 25.4 w x 67 d x 33.5 h
in: 10 w x 26.378 d x 13.189 h

Source Files

|

Description

|

Printing Details

This 3D Model of Gigahorse from Mad Max: Fury Road consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

- 1 version of Immortan Joe's Gigahorse STL files for FFF/FDM 3D printers - the files of this version will be available for download after the purchase​​​​​​.

- STL files of high-poly Mad Max Gigahorse 3D Model for 3D printing consist of 120 parts
- Size:
FFF/FDM: 335 mm tall, 254 mm wide, 670 mm deep

Assembly Manual for FFF/FDM 1.0 version in PDF format
- Detailed settings that we provide as a recommendation for Cura, Simplify3D and Slic3r for the best print
- Full technical support from the Gambody Support Team

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
_1_wheel_front_disk_in_R (repaired).stl
0.46 MiB 55 min
<1 m
30 x 30 x 20 Download
_2_wheel_front_disk_in_L (repaired).stl
0.46 MiB 55 min
<1 m
30 x 30 x 20 Download
_3_wheel_front_connector_ x2 (repaired).stl
0.17 MiB 9 min
<1 m
25 x 7 x 5 Download
_4_wheel_front_disk_out_x 2 (repaired).stl
4.04 MiB 2 h 47 min
2 m
44 x 40 x 26 Download
_5_wheel_front_tire_R (re paired).stl
22.67 MiB 7 h 47 min
4 m
74 x 74 x 31 Download
_6_wheel_front_tire_L (re paired).stl
22.67 MiB 7 h 46 min
4 m
74 x 74 x 31 Download
_7_wheel_back_rotor_R (re paired).stl
0.61 MiB 54 min
<1 m
42 x 42 x 10 Download
_8_wheel_back_rotor_L (re paired).stl
0.61 MiB 54 min
<1 m
42 x 42 x 10 Download
_9_wheel_back_disk_in_x2 (repaired).stl
7.24 MiB 5 h 59 min
3 m
66 x 62 x 40 Download
_10_wheel_back_disk_out_x 2 (repaired).stl
8.36 MiB 5 h 53 min
3 m
66 x 62 x 27 Download
_11_wheel_back_tire_x2_R (repaired).stl
23.28 MiB 14 h 5 min
7 m
Download
_12_wheel_back_tire_x2_L (repaired).stl
23.28 MiB 14 h 56 min
7 m
104 x 104 x 30 Download
_13_suspension_back_conne ctor_a_x4 (repaired).stl
0.12 MiB 4 min
<1 m
14 x 6 x 4 Download
_14_suspension_back_conne ctor_b_x2 (repaired).stl
0.08 MiB 5 min
<1 m
14 x 7 x 5 Download
_15_suspension_back_conne ctor_c_x4 (repaired).stl
0.09 MiB 3 min
<1 m
23 x 4 x 3 Download
_16_suspension_back_pisto n_out_x4 (repaired).stl
0.31 MiB 34 min
<1 m
9 x 9 x 32 Download
_17_suspension_back_pisto n_in_x4 (repaired).stl
0.13 MiB 11 min
<1 m
5 x 35 x 8 Download
_18_suspension_back_1 (re paired).stl
4.99 MiB 9 h 57 min
6 m
156 x 43 x 46 Download
_19_suspension_back_2_x2 (repaired).stl
0.75 MiB 45 min
<1 m
122 x 33 x 6 Download
_20_suspension_back_3_x2 (repaired).stl
0.56 MiB 29 min
<1 m
118 x 20 x 5 Download
_21_suspension_back_4 (re paired).stl
0.52 MiB 30 min
<1 m
21 x 43 x 8 Download
_22_suspension_back_5_x2 (repaired).stl
0.09 MiB 10 min
<1 m
17 x 31 x 4 Download
_23_suspension_back_6 (re paired).stl
0.29 MiB 14 min
<1 m
13 x 13 x 16 Download
_24_suspension_mid_1 (rep aired).stl
0.53 MiB 30 min
<1 m
21 x 43 x 8 Download
_25_suspension_mid_2 (rep aired).stl
0.68 MiB 1 h 18 min
1 m
132 x 45 x 8 Download
_26_suspension_mid_3_x2 ( repaired).stl
0.24 MiB 12 min
<1 m
12 x 6 x 12 Download
_27_suspension_front_conn ector_a_x4 (repaired).stl
0.12 MiB 4 min
<1 m
14 x 6 x 4 Download
_28_suspension_front_conn ector_b_x2 (repaired).stl
0.12 MiB 4 min
<1 m
16 x 6 x 4 Download
_29_suspension_front_conn ector_c_x2 (repaired).stl
0.10 MiB 3 min
<1 m
6 x 15 x 3 Download
_30_suspension_front_conn ector_d_x2 (repaired).stl
0.08 MiB n.a.
n.a.
5 x 9 x 3 Download
_31_suspension_front_conn ector_e_x4 (repaired).stl
0.10 MiB 2 min
<1 m
Download
_32_suspension_front_pist on_out_x4 (repaired).stl
0.31 MiB 35 min
<1 m
9 x 9 x 33 Download
_33_suspension_front_pist on_in_x4 (repaired).stl
0.13 MiB 10 min
<1 m
Download
_34_suspension_front_1 (r epaired).stl
1.85 MiB 3 h 7 min
1 m
115 x 33 x 15 Download
_35_suspension_front_2 (r epaired).stl
0.13 MiB 27 min
<1 m
Download
_36_suspension_front_3_x2 (repaired).stl
0.10 MiB 11 min
<1 m
14 x 29 x 5 Download
_37_suspension_front_4_x2 (repaired).stl
0.55 MiB 29 min
<1 m
109 x 53 x 5 Download
_38_suspension_front_5_x2 (repaired).stl
0.40 MiB 29 min
<1 m
107 x 49 x 5 Download
_39_frame_1 (repaired).st l
3.13 MiB 11 h 58 min
6 m
Download
_40_frame_beams_x6 (repai red).stl
0.02 MiB 7 min
<1 m
30 x 9 x 5 Download
_41_frame_2 (repaired).st l
5.75 MiB 13 h 5 min
6 m
74 x 197 x 51 Download
_42_frame_connector_x4 (r epaired).stl
0.12 MiB 4 min
<1 m
6 x 17 x 4 Download
_43_frame_rail_R (repaire d).stl
0.41 MiB 1 h 6 min
1 m
19 x 48 x 44 Download
_44_frame_rail_L (repaire d).stl
0.41 MiB 1 h 7 min
1 m
19 x 48 x 44 Download
_45_frame_body_beams_x10 (repaired).stl
0.01 MiB 2 min
<1 m
4 x 8 x 3 Download
_46_engine_connector_x2 ( repaired).stl
0.16 MiB 3 min
<1 m
11 x 6 x 3 Download
_47_engine_front_1 (repai red).stl
0.43 MiB 3 h 27 min
2 m
65 x 54 x 23 Download
_48_engine_front_2 (repai red).stl
0.31 MiB 1 h 3 min
1 m
41 x 28 x 5 Download
_49_engine_front_3_x2 (re paired).stl
0.60 MiB 1 h 14 min
1 m
50 x 33 x 6 Download
_50_engine_side_1_R (repa ired).stl
1.28 MiB 1 h 59 min
1 m
54 x 31 x 19 Download
_51_engine_side_2_R (repa ired).stl
0.53 MiB 2 h 23 min
2 m
33 x 35 x 84 Download
_52_engine_side_3_R (repa ired).stl
1.72 MiB 6 h 13 min
4 m
85 x 42 x 40 Download
_53_engine_side_1_L (repa ired).stl
1.27 MiB 1 h 59 min
1 m
54 x 31 x 19 Download
_54_engine_side_2_L (repa ired).stl
0.53 MiB 2 h 28 min
2 m
34 x 35 x 84 Download
_55_engine_side_3_L (repa ired).stl
1.73 MiB 6 h 14 min
4 m
85 x 42 x 40 Download
_56_engine_base_1 (repair ed).stl
6.93 MiB 11 h 21 min
10 m
81 x 62 x 55 Download
_57_engine_base_2 (repair ed).stl
0.09 MiB 13 min
<1 m
10 x 21 x 8 Download
_58_engine_base_3 (repair ed).stl
13.40 MiB 12 h 32 min
6 m
82 x 67 x 54 Download
_58_engine_base_4 (repair ed).stl
14.13 MiB 12 h 51 min
6 m
82 x 67 x 54 Download
_59_engine_pipe_1_x4 (rep aired).stl
0.34 MiB 1 h 18 min
1 m
14 x 14 x 85 Download
_60_engine_pipe_2_L (repa ired).stl
0.64 MiB 47 min
<1 m
29 x 54 x 30 Download
_61_engine_pipe_3_L (repa ired).stl
0.84 MiB 2 h 51 min
2 m
72 x 48 x 67 Download
_62_engine_pipe_2_R (repa ired).stl
0.64 MiB 47 min
<1 m
Download
_63_engine_pipe_3_R (repa ired).stl
0.82 MiB 2 h 55 min
2 m
72 x 48 x 67 Download
_64_engine_box_1_x2 (repa ired).stl
1.04 MiB 14 min
<1 m
9 x 8 x 14 Download
_65_engine_box_2_x2 (repa ired).stl
0.66 MiB 8 min
<1 m
18 x 10 x 4 Download
_66_engine_box_3_x2 (repa ired).stl
1.98 MiB 1 h 12 min
1 m
Download
_67_engine_box_4_x2 (repa ired).stl
1.39 MiB 41 min
<1 m
26 x 11 x 29 Download
_68_engine_stuff_1_x2 (re paired).stl
0.63 MiB 6 min
<1 m
15 x 39 x 3 Download
_69_engine_stuff_2_x4 (re paired).stl
0.14 MiB 14 min
<1 m
6 x 7 x 20 Download
_70_engine_stuff_3_R (rep aired).stl
2.67 MiB 1 h 17 min
1 m
31 x 44 x 46 Download
_71_engine_stuff_3_L (rep aired).stl
2.67 MiB 1 h 17 min
1 m
31 x 44 x 46 Download
_72_engine_stuff_4_R (rep aired).stl
0.37 MiB 9 min
<1 m
Download
_73_engine_stuff_4_L (rep aired).stl
0.37 MiB 9 min
<1 m
Download
_74_engine_stuff_5_x4 (re paired).stl
0.10 MiB 5 min
<1 m
7 x 7 x 7 Download
_75_engine_stuff_6_x2_R ( repaired).stl
0.82 MiB 17 min
<1 m
15 x 13 x 18 Download
_76_engine_stuff_6_x2_L ( repaired).stl
0.82 MiB 17 min
<1 m
Download
_77_engine_stuff_7_x4 (re paired).stl
6.41 MiB 19 min
<1 m
11 x 11 x 17 Download
_78_engine_stuff_8 (repai red).stl
1.16 MiB 27 min
<1 m
Download
_79_engine_stuff_pipes_1_ R (repaired).stl
0.38 MiB 34 min
<1 m
19 x 128 x 5 Download
_80_engine_stuff_pipes_2_ R (repaired).stl
3.06 MiB 1 h 3 min
1 m
61 x 35 x 44 Download
_81_engine_stuff_pipes_3_ R (repaired).stl
3.26 MiB 60 min
1 m
41 x 39 x 38 Download
_82_engine_stuff_pipes_4_ R (repaired).stl
2.68 MiB 18 min
<1 m
16 x 22 x 15 Download
_83_engine_stuff_pipes_5_ R (repaired).stl
3.07 MiB 39 min
<1 m
Download
_84_engine_stuff_pipes_1_ L (repaired).stl
0.38 MiB 34 min
<1 m
19 x 128 x 5 Download
_85_engine_stuff_pipes_2_ L (repaired).stl
3.06 MiB 1 h 3 min
1 m
61 x 35 x 44 Download
_86_engine_stuff_pipes_3_ L (repaired).stl
3.26 MiB 58 min
1 m
41 x 39 x 36 Download
_87_engine_stuff_pipes_4_ L (repaired).stl
2.68 MiB 18 min
<1 m
Download
_88_2_engine_stuff_pipes_ 6_L (repaired).stl
0.36 MiB 45 min
<1 m
26 x 21 x 43 Download
_88_2_engine_stuff_pipes_ 6_R (repaired).stl
0.36 MiB 46 min
<1 m
28 x 21 x 43 Download
_88_engine_stuff_pipes_5_ L (repaired).stl
3.07 MiB 39 min
<1 m
27 x 35 x 29 Download
_89_body_front_headlight_ x4 (repaired).stl
2.70 MiB 7 min
<1 m
Download
_90_body_front (repaired) .stl
51.91 MiB 46 h 54 min
27 m
168 x 99 x 91 Download
_91_body_1 (repaired).stl
26.27 MiB 7 h 32 min
4 m
149 x 49 x 14 Download
_92_body_2 (repaired).stl
32.23 MiB 37 h 33 min
21 m
154 x 51 x 128 Download
_93_body_3 (repaired).stl
21.70 MiB 12 h 26 min
7 m
Download
_94_body_4_R (repaired).s tl
72.64 MiB 45 h 40 min
26 m
76 x 98 x 174 Download
_95_2_body_4_luke (repair ed).stl
0.11 MiB 53 min
1 m
36 x 35 x 6 Download
_96_body_beam_1_x8 (repai red).stl
0.01 MiB 7 min
<1 m
18 x 6 x 6 Download
_97_body_beam_2_x13 (repa ired).stl
0.01 MiB 3 min
<1 m
8 x 13 x 1 Download
_98_body_beam_3 (repaired ).stl
0.02 MiB 22 min
<1 m
7 x 55 x 7 Download
_99_body_door_R (repaired ).stl
7.00 MiB 3 h 29 min
2 m
21 x 64 x 47 Download
_100_body_door_L (repaire d).stl
7.00 MiB 3 h 43 min
2 m
21 x 64 x 47 Download
_101_body_gun_R (repaired ).stl
2.60 MiB 2 h 44 min
2 m
23 x 96 x 55 Download
_102_body_gun_L (repaired ).stl
2.60 MiB 2 h 52 min
2 m
23 x 96 x 55 Download
_103_body_flag_1_x2 (repa ired).stl
2.97 MiB 12 h 24 min
10 m
111 x 117 x 155 Download
_104_body_flag_2_x2 (repa ired).stl
0.59 MiB 21 min
<1 m
131 x 141 x 3 Download
_105_cockpit_seat_1 (repa ired).stl
9.46 MiB 7 h 34 min
4 m
112 x 38 x 43 Download
_106_cockpit_seat_2 (repa ired).stl
8.94 MiB 7 h 44 min
5 m
114 x 42 x 44 Download
_107_cockpit_stearing (re paired).stl
18.30 MiB 39 min
<1 m
24 x 24 x 18 Download
_108_cockpit_spedals (rep aired).stl
0.76 MiB 29 min
<1 m
Download
_109_cockpit_scarpet_1_x2 (repaired).stl
2.30 MiB 37 min
<1 m
43 x 40 x 2 Download
_110_cockpit_scarpet_2_x2 (repaired).stl
2.41 MiB 27 min
<1 m
43 x 29 x 2 Download
_111_window_front_bot (re paired).stl
4.12 MiB 2 h 1 min
1 m
115 x 24 x 19 Download
_112_window_bot_1_R (repa ired).stl
0.30 MiB 10 min
<1 m
Download
_113_window_bot_2_R (repa ired).stl
1.14 MiB 44 min
<1 m
6 x 20 x 62 Download
_114_window_bot_1_L (repa ired).stl
0.30 MiB 10 min
<1 m
Download
_115_window_bot_2_L (repa ired).stl
1.14 MiB 44 min
<1 m
Download
_116_window_front_top (re paired).stl
1.18 MiB 53 min
1 m
88 x 18 x 17 Download
_117_window_top_1_R (repa ired).stl
0.28 MiB 8 min
<1 m
7 x 16 x 10 Download
_118_window_top_2_R (repa ired).stl
1.06 MiB 42 min
<1 m
4 x 18 x 62 Download
_119_window_top_1_L (repa ired).stl
0.28 MiB 8 min
<1 m
Download
_120_window_top_2_L (repa ired).stl
1.06 MiB 42 min
<1 m
Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min
1 m
150 x 18 x 5 Download
_95_body_4_L (repaired).s tl
72.65 MiB 45 h 30 min
26 m
76 x 98 x 174 Download

ABOUT THIS 3D MODEL

In the spectacular post-apocalyptic setting of Mad Max: Fury Road, the showcase of Immortan Joe's power introduced a plethora of fantastic custom-built vehicles, such as the monstrous War Rig. As if antagonising it, the Gigahorse appeared on stage as the crown jewel of Joe's collection and his weapon of war against the rebellious Furiosa. And while we watched the enemies water the sandy landscapes with blood, our contributing 3D artist could not take his eyes off the vehicle and felt inspired to turn it into a 3D printing project!

The 3D model of Gigahorse recreates the jaw-dropping vehicle built out of two 1959 Cadillac Coupe de Villes, a rare find in a world where there's barely one of anything. The two elaborately detailed donor cars stacked on top of each other rest on immense tractor tyres that elevate them above the ground and represent the militant Colonel's authority. So don't miss out on the opportunity to 3D print an addition to your furious armada and discover all of its cool features!

ADAPTATION FOR 3D PRINTING

Gigahorse for 3D printing is an active assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 120 hours in total. For you to receive the cleanest 3D printing result possible and to minimize the amount of filament needed for generated support, the desert monster car was divided into many assembly parts that are provided as separate STL files. And for you to create an impressive piece for display, our team equipped the model with an active suspension and lots of articulated elements that you can interact with.

All assembly parts are provided in STL files of FFF/FDM version in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won’t face difficulties when placing the parts on a build plate. When downloading any model’s file you will also receive “Assembly Manual” for FFF/FDM 1.0 version in PDF format. We highly recommend that you get acquainted with the “Assembly video” and “Assembly Manual” before getting down to the Gigahorse model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model’s scale was calculated from the approximate length of the Gigahorse which is 7000 mm. The 3D printing model’s chosen scale is 1:16 for the FFF/FDM version.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 120 parts;
- A printed model stands 335 mm tall, 254 mm wide, 670 mm deep;
- Fully active suspension system allows bouncing motion of the car’s body;
- The active suspension can be assembled with regular ball pen springs for better shock-absorption or without them;
- Design of the front axle allows synchronised movement of front wheels;
All wheels of the car rotate;
Authentic design of the custom-built engine;
Highly-detailed exterior of the car;
- Opening doors;
- Rotating harpoon guns;
- You can 3D print the flagpoles or substitute them with thick wire pieces;
- You can 3D print the flags or make them from scratch using fabric;
- Elaborate interior, dashboard, decorated steering wheel;
- The steering wheel rotates;
- The windscreen comes as a separate assembly part to be printed with transparent material;
- You can display Gigahorse with or without the door windows 3D printed with transparent material;
- There is a slot in the floorpan to hide the battery for you to wire up the Gigahorse with LED and light up the headlights;
- Assembly of the model requires additional “pins” that do not come in STL files but can be made out of short pieces of regular 1.75mm filament;
- All parts are divided in such a way that you will print them with the smallest number of support structures and assemble the complex vehicle with ease.

You can get the model of Mad Max Gigahorse for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Gigahorse 3D Printing Model at Gambody YouTube channel.

Also, you may like the War Rig for 3D printing or other Fiction 3D Printing Models.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

Note:
- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Quality
Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill 
Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Material 
Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at support@gambody.com)

Speed 

You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Travel 
Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

Similar items

Browse more newly listed 3D printings