Wrath of the Lich King 3D Printing Figurine | Assembly

cm: 46.1 w x 24 d x 39.6 h
in: 18.15 w x 9.449 d x 15.591 h

Source Files




Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Wrath of the Lich King 3D Printing Figurine comes in 4 versions for each 3D printer type (FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing figurine is available in the DESCRIPTION section.


File Name File Size Time / Filament Object Size
(x/y/z mm)
2.47 MiB 4 h 47 min 3 m 45 x 42 x 72 Download
3.19 MiB 5 h 35 min 3 m 40 x 40 x 81 Download
3_Ge_lock_7S (x12).STL
0.02 MiB 3 min <1 m 8 x 18 x 2 Download
8.97 MiB 25 h 26 min 16 m 80 x 68 x 105 Download
6.20 MiB 10 h 30 min 6 m 187 x 172 x 67 Download
4.47 MiB 6 h 8 min 4 m 178 x 134 x 58 Download
2.29 MiB 4 h 11 min 2 m 35 x 39 x 82 Download
3.17 MiB 6 h 7 min 4 m 38 x 46 x 80 Download
3.40 MiB 5 h 43 min 3 m 58 x 85 x 48 Download
3.96 MiB 6 h 11 min 3 m 55 x 86 x 59 Download
2.48 MiB 5 h 3 m 38 x 58 x 70 Download
13.93 MiB 35 h 17 min 23 m 124 x 94 x 120 Download
8.50 MiB 16 h 36 min 10 m 61 x 72 x 105 Download
8.44 MiB 17 h 29 min 11 m 63 x 71 x 107 Download
22.35 MiB 121 h 16 min 93 m 404 x 118 x 215 Download
6.24 MiB 47 h 6 min 35 m 126 x 140 x 171 Download
3.88 MiB 29 h 26 min 22 m 119 x 121 x 89 Download
5.81 MiB 46 h 47 min 35 m 135 x 157 x 117 Download
4.36 MiB 33 h 52 min 25 m 154 x 119 x 107 Download
11.19 MiB 38 h 59 min 24 m 195 x 177 x 198 Download
11.43 MiB 36 h 2 min 22 m 171 x 174 x 167 Download
30_Ge_lock_7S (x16).STL
0.02 MiB 3 min <1 m 7 x 18 x 2 Download
20_platform_base_1_FDM.st l
23.27 MiB 31 h 20 min 19 m 126 x 150 x 64 Download
21_platform_base_2_FDM.st l
23.69 MiB 35 h 24 min 21 m 156 x 136 x 64 Download
22_platform_base_3_FDM.st l
22.99 MiB 32 h 7 min 19 m 134 x 147 x 64 Download
23_platform_base_4_FDM.st l
21.54 MiB 28 h 43 min 17 m 141 x 126 x 63 Download
18.15 MiB 59 h 25 min 35 m 124 x 138 x 187 Download
18.44 MiB 55 h 45 min 32 m 188 x 128 x 131 Download
19.07 MiB 57 h 31 min 34 m 137 x 139 x 135 Download
19.50 MiB 58 h 8 min 34 m 190 x 112 x 132 Download


Lich King comprised of Arthas and Ner'zhul, the Lich King was ruthless, cynical and unimaginably cruel. He made no attempt to hide this, even from his own minions, openly regarding them as worthless cannon fodder to be sacrificed in his name. The Lich King also possessed an unending hatred of the living, especially of those who oppose him, and does not hesitate to inflict sadistic punishments upon them. It is unknown what personality the Lich King currently possesses, considering the benevolent intentions of Bolvar Fordragon when he upheld the responsibilities. It can be inferred after Legion's death knight class hall quests that Bolvar is at least somewhat influenced by Ner'zhul's presence within the Helm of Domination.


The model is saved in STL files, a format supported by most 3D printers

FDM version features:
- Contain 25 parts;
- Made with Locks. One part of Lock (3_Ge_lock_7S (x12)) you need to print 12 times;
- Made with the cloak that you can print with the flexible material;
- Made with a removable sword that you can put in different hands;
- Made with a stylized platform that divided into 8 pieces for ease of printing;
- All parts are divided in such way that you will print them with the smallest amount of supports.

DLP/SLA version features:
- Same as FDM but smaller, also made as 6 parts;

SLS version features:
- Same as SLA but made as 1 part for economy your material;

DLP/SLA 1.1 Pre-supported version features:
- Contains 8 parts;
- A printed model is 198 mm tall, 230 mm wide, 120 mm deep;
- The STL files that this version comprises are pre-supportedhollowed out, and have drain holes where needed;
- You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate;
- When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact.

All STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for CURA 3.2.1. Software.

There are 25 parts for FFF/FDM version, 6 parts for SLA version and 1 part for SLS.

Scale: His tall is 2300 mm. Model made as 1/8 for FDM version and 1/16 for SLS/SLA version.

FDM version dimensions:
After being printed will stand - 396 mm tall, 461 mm wide, 240 mm deep;

SLS/DLP/​SLA version dimensions:
After being printed will stand - 198 mm tall, 230 mm wide, 120 mm deep;
- Has only one detail, to keep printing costs down.


- STL files of Wrath of the Lich King 3D Miniature for 3D printing which consist of 32 parts;
- 3 versions of files for this model for FFF/FDM, SLS, and SLA;
- Made with platform; 
- High-poly detailed miniature of Wrath of the Lich King;
- Detailed settings that we provide for Cura 3.2.1. for the best print;
- Full technical support from the Gambody Support Team.

Watch the tutorial video on how to assemble Wrath of the Lich King 3D Printing Miniature at Gambody YouTube channel.

You can get Model of Wrath of the Lich King for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Also, you may like other WoW 3D Printing Miniatures, as well as 3D Figurine of Lich King Lord Of Terror in another pose.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.2.1 and printed on an Ultimaker 2 in PLA material.

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Print Speed: 45 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
Travel Speed: 120 mm/s
Initial Layer Speed: 30 mm/s
  Initial Layer Print Speed: 30 mm/s
  Initial Layer Travel Speed: 60 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 1.3333 mm
Support Z Distance: 0.3 mm
    Support Top Distance: 0.3 mm
    Support Bottom Distance: 0.3 mm
Support X/Y Distance: 0.7 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.2 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.


comments powered by Disqus

Similar items

Browse more newly listed 3D printings