Make pre-order

Warcraft Durotan 3D Model | Assembly

cm: 25.26 w x 23.96 d x 29.56 h
in: 9.945 w x 9.433 d x 11.638 h
BUY FOR  $24.99

Source Files




Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
15.41 MiB 15 h 40 min
10 m
8.97 MiB 11 h 12 min
7 m
8.39 MiB 11 h 1 min
8 m
39.50 MiB 62 h 40 min
46 m
1.48 MiB 59 min
<1 m
1.54 MiB 1 h
<1 m
1.46 MiB 50 min
<1 m
7.71 MiB 19 h 38 min
14 m
8.02 MiB 16 h 17 min
11 m
19.54 MiB 38 h 3 min
23 m
34.61 MiB 91 h 56 min
54 m
2.70 MiB 1 h 24 min
1 m
platform (empty).STL
57.29 MiB n.a.

Here is the 3D model of Durotan – the chieftain of Frostwolf inspired by the character from the “Warcraft” movie which is based on this video game, which is actually one of the most popular RPG of today.
Though he is considered to be a character that represents good, Durotan is also a warrior.  So, fighting is definitely his strong side. That is why the toy stands in his fighting stand and holds the axe tightly. Look at how similar to movie character the model is – the hair, the fangs, the clothes are worked out to the last detail.

Durotan belongs to orcs race in the “World of Warcraft”. The orcs stand out among another races – they are fierce warriors. That’s why the Horde arrived – a powerful alliance of orcs clans. Its main goal was to conquer new territories. Durotan and his clan had to join the Horde in order to save his clan from dying. But then he decided to unite with peoples’ clan and resist the Horde together.  What did it result in? If you watched the movie, you definitely remember an epic fight between Durotan and Gul’Dan, Horde’s chieftain. It is a real masterpiece of computer graphics. 

The model is split into 13 pieces to make the process of assembling easy and comfortable, and the process of printing – ergonomic. The height of the model after printing is quite big – 252.6mm wide, 295.6mm high, 239.6mm deep. That makes it look impressively.

Wanna have one of the WoW mightiest warriors standing on your shelf? Then click the green Buy button the top-right corner of the model's page and buy Durotan model for 3D print right now! The possible ways of payment are with PayPal system or with your credit card.

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 2.3.1. To avoid printing problems, we recommend the following settings:


Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm


Wall Thickness: 0.8 mm
Wall Line Count: 2
Top/Bottom Thickness: 0.8 mm
Top Thickness: 0.8 mm
Top Layers: 8
Bottom Thickness: 0.8 mm
Bottom Layers: 8
Top/Bottom Pattern: Lines
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
Compensate Outer Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check
Horizontal Expansion: 0 mm
Z Seam Alignment: Shortest


Infill Density: 25%
Infill Line Distance: 3.2 mm
Infill Pattern: Grid
Infill Overlap Percentage: 10%
Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 0
Infill Before Walls: Check


Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Standby Temperature: 175°C
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
Nozzle Switch Retract Speed: 20 mm/s
Nozzle Switch Prime Speed: 20 mm/s


Print Speed: 60 mm/s
Infill Speed: 80 mm/s
Wall Speed: 30 mm/s
Outer Wall Speed: 30 mm/s
Inner Wall Speed: 60 mm/s
Top/Bottom Speed 15 mm/s
Support Speed: 60 mm/s
Support Infill Speed: 60 mm/s
Travel Speed: 120 mm/s
Initial Layer Speed: 15 mm/s
Initial Layer Print Speed: 15 mm/s
Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed 15 mm/s
Maximum Z Speed: 0 mm/s


Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm


Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Regular Fan Speed at Height: 0.3 mm
Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s


Enable Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 30 %
Support Line Distance: 1.3333 mm
Support Z Distance: 0.1 mm
Support Top Distance: 0.1 mm
Support Bottom Distance: 0.1 mm
Support X/Y Distance: 0.7 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.2 mm
Support Stair Step Height: 0.3 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion

Build Plate Adhesion Type: Brim
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
Brim Line Count: 20
Brim Only on Outside: Check

Mesh Fixes

Union Overlapping Volumes: Check

Special Modes

Print Sequence: All at Once
Surface Mode: Normal


Extra Skin Wall Count: 0

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.


comments powered by Disqus
Other author's 3D printings


Blizzard, Warcraft, Durotan, Orc, Assembly, Game Model

Similar items

Browse more newly listed 3D printings