Counter-Terrorist Soldier 3D Model | Static Figure

Counter-Terrorist Soldier 3D printing design will certainly become the centerpiece of your 3D models collection. Descending from the widely played shooter video game, this fearless fighter will take any challenge, plunging into the thick of battle, defeating the enemy and foiling terrorist plans. 

Known for his well-trained fighting techniques and shooting abilities, this soldier is the best help an army troop fighting terrorism can have. 

If you are a true fan of the game, you will definitely love to have this Counter-Terrorist Soldier 3D Model in your collection. The model comes in static form and is mounted on a support. It is 7.921cm wide, 5.079cm deep and 11.002cm tall. 

The printing files have been adapted for all types of 3D printers (SLA/SLS and FFF) which will enable you to get outstanding results, regardless of the type of printer you possess.

Buy the Counter-Terrorist 3D print files zipped in .STL file format and begin printing out your own terrorist fighting soldier!

Generic

This model was tested in Cura 15.06.Beta. To avoid printing problems, we recommend the following settings:

Quality

• Layer height: 0.1mm
• Initial layer thickness: 0.3mm
• Wall line count: 2
• Infill line width: 0.3mm
• Support line width: 0.3mm
• Top layers: 3
• Bottom layers: 3
• Bottom/Top pattern: Lines
• Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). The model was tested in PLA.

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why, we only test print the most difficult segments of the model’s parts.

 Material:

• Printing temperature: 190°C
• Bed temperature: 65°C
• Enable retraction: Check
• Retraction retract speed: 30mm/s
• Retraction prime speed: 30mm/s
• Retraction distance: 3mm
• Retraction minimum travel: 2.5mm
• Enable combing: Check
• Minimal extrusion retraction: 0.02mm

 Speed setups:

• Infill speed: 50mm/s
• Outer shell speed: 20mm/s
• Inner shell speed; 20mm/s
• Top/bottom speed: 20mm/s
• Support speed: 30mm/s
• Travel speed: 150mm/s
• Skirt speed: 30mm/s
• Amount of slower layers: 4 

Infill:

• Infill pattern: Grid
• Line distance: 2mm
• Infill overlap: 20%
• Infill layers: 0

Support:

• Enable support: check
• Placement: Everywhere
• Overhang angle: 15°
• X/Y distance: 0.7mm
• Top distance: 0.2mm
• Bottom distance: 0.2mm
• Stair step height: 0.5mm
• Join distance: 0.7mm
• Area smoothing: 0.6mm
• Use towers: check
• Pattern: Grid
• Line distance: 1.5mm

Platform adhesion:

• Type: Brim
•  Brim Line Count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations: 

Other settings: By default.

This model has been printed out at a height of 11cm. If you want it 16cm+ tall you should print it at Layer height: 0.2mm nd Support Line distance: 2mm for a similar quality.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.