Make pre-order

Anguirus 3D Printing Figurine | Assembly

cm: 31.1 w x 56 d x 24.5 h
in: 12.244 w x 22.047 d x 9.646 h
BUY FOR  $24.99

Source Files




Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Anguirus 3D printing figurine comes in 4 versions for each 3D printer type (FFF/FDM, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing figurine is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
54.73 MiB 22 h 39 min
15 m
2_jaw_top_FDM(repaired).s tl
22.24 MiB 56 min
<1 m
25 x 41 x 18 Download
3_tongue_FDM(repaired).st l
5.90 MiB 38 min
<1 m
16 x 17 x 41 Download
4_horn_1_FDM(repaired).st l
1.59 MiB 6 min
<1 m
7 x 10 x 10 Download
5_horn_2_FDM(repaired).st l
3.16 MiB 12 min
<1 m
9 x 15 x 22 Download
6_horn_3_FDM(repaired).st l
3.98 MiB 19 min
<1 m
13 x 14 x 21 Download
7_horn_4_FDM(repaired).st l
5.62 MiB 26 min
<1 m
13 x 18 x 28 Download
8_horn_5_FDM(repaired).st l
5.34 MiB 27 min
<1 m
9_horn_6_FDM(repaired).st l
3.68 MiB 20 min
<1 m
10_horn_7_FDM(repaired).s tl
2.73 MiB 16 min
<1 m
11_body_1_FDM(repaired).s tl
48.62 MiB 47 h 55 min
30 m
12_body_2_FDM(repaired).s tl
51.69 MiB 48 h 14 min
30 m
13_arm_R_FDM(repaired).st l
34.35 MiB 13 h 3 min
8 m
14_hand_R_FDM(repaired).s tl
27.42 MiB 3 h 46 min
2 m
43 x 60 x 28 Download
15_arm_L_FDM(repaired).st l
36.96 MiB 14 h 32 min
10 m
61 x 104 x 85 Download
16_hand_L_FDM(repaired).s tl
36.24 MiB 3 h 14 min
2 m
47 x 69 x 25 Download
17_leg_L_1_FDM(repaired). stl
36.05 MiB 15 h 40 min
9 m
18_leg_L_2_FDM(repaired). stl
30.84 MiB 5 h 23 min
3 m
19_foot_L_FDM(repaired).s tl
34.72 MiB 3 h 48 min
2 m
20_leg_R_1_FDM(repaired). stl
39.75 MiB 15 h 20 min
9 m
74 x 74 x 92 Download
21_leg_R_2_FDM(repaired). stl
35.58 MiB 7 h 54 min
5 m
49 x 86 x 46 Download
22_foot_R_FDM(repaired).s tl
35.34 MiB 3 h 38 min
2 m
55 x 53 x 43 Download
23_carapace_1_FDM(repaire d).stl
47.88 MiB 28 h 22 min
19 m
113 x 122 x 64 Download
24_carapace_2_FDM(repaire d).stl
47.49 MiB 22 h 2 min
15 m
95 x 116 x 58 Download
25_carapace_3_FDM(repaire d).stl
43.62 MiB 19 h 22 min
13 m
90 x 114 x 57 Download
26_carapace_4_FDM(repaire d).stl
44.21 MiB 23 h 17 min
15 m
110 x 115 x 62 Download
27_tail_1_FDM(repaired).s tl
46.79 MiB 32 h 11 min
23 m
71 x 110 x 162 Download
28_tail_2_FDM(repaired).s tl
33.75 MiB 16 h 23 min
12 m
42 x 108 x 173 Download
29_spike_1_FDM(repaired). stl
2.67 MiB 11 min
<1 m
30_spike_2_FDM(repaired). stl
2.39 MiB 8 min
<1 m
7 x 6 x 23 Download
31_spike_3_FDM(repaired). stl
1.90 MiB 9 min
<1 m
32_spike_4_FDM(repaired). stl
1.72 MiB 7 min
<1 m
6 x 5 x 21 Download
33_spike_5_FDM(repaired). stl
2.01 MiB 10 min
<1 m
10 x 7 x 24 Download
34_spike_6_FDM(repaired). stl
1.85 MiB 10 min
<1 m
7 x 7 x 23 Download
35_spike_7_FDM(repaired). stl
1.99 MiB 10 min
<1 m
36_spike_8_FDM(repaired). stl
1.62 MiB 8 min
<1 m
7 x 7 x 20 Download
37_spike_9_FDM(repaired). stl
2.76 MiB 14 min
<1 m
9 x 9 x 27 Download
38_spike_10_FDM(repaired) .stl
2.24 MiB n.a.
7 x 7 x 24 Download
39_spike_11_FDM(repaired) .stl
1.49 MiB 7 min
<1 m
40_spike_12_FDM(repaired) .stl
1.48 MiB 7 min
<1 m
7 x 6 x 18 Download
41_spike_13_FDM(repaired) .stl
2.74 MiB 9 min
<1 m
8 x 7 x 21 Download
42_spike_14_FDM(repaired) .stl
2.36 MiB 8 min
<1 m
43_spike_15_FDM(repaired) .stl
3.05 MiB 9 min
<1 m
8 x 7 x 23 Download
44_spike_16_FDM(repaired) .stl
2.63 MiB 9 min
<1 m
6 x 7 x 22 Download
45_spike_17_FDM(repaired) .stl
2.86 MiB 9 min
<1 m
10 x 6 x 24 Download
46_spike_18_FDM(repaired) .stl
2.54 MiB 8 min
<1 m
7 x 8 x 23 Download
47_spike_19_FDM(repaired) .stl
2.38 MiB 8 min
<1 m
48_spike_20_FDM(repaired) .stl
1.51 MiB 4 min
<1 m
4 x 5 x 16 Download
49_platform_1_FDM(repaire d).stl
39.17 MiB 33 h 5 min
19 m
201 x 156 x 40 Download
50_platform_2_FDM(repaire d).stl
37.67 MiB 31 h 47 min
19 m
156 x 201 x 34 Download
51_platform_3_FDM(repaire d).stl
38.34 MiB 31 h 58 min
18 m
52_platform_4_FDM(repaire d).stl
38.98 MiB 33 h 36 min
19 m
53_ge_lock_10H(x33)_FDM(r epaired).stl
0.03 MiB 4 min
<1 m
18 x 10 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min
1 m
150 x 18 x 5 Download


No one had dared confront the mighty King of Monsters before him - the one and only Anguirus! This legendary kaiju, who later became Godzilla’s loyal ally and closest friend, is a quadrupedal dinosaur, who had remained dormant until he was awakened and irradiated by nuclear bomb tests in the modern era. This spiky fellow is a wild mix of various reptiles such as ankylosaurus, a styracosaurus, and even a crocodile. The tenacious prehistoric warrior, who never backs down in the face of danger and is ready to put up a fight against even the strongest monsters, was embodied in the Anguirus 3D Printing Figurine by one of our talented contributing 3D artists. The author’s boundless love for the Kaiju universe encouraged him to spend circa 200 hours in order to recreate the monster with utmost precision. The Anguirus 3D Printing Figurine boasts an immense level of detail and exquisitely realistic depiction of the creature. The monster is portrayed letting out a fierce roar, while his sharp serrated teeth are bare in a threat. The snout of Anguirus is decorated with a rhino-like horn and head of the kaiju - with a graceful yet dangerous crown of horns. Anguirus for 3D printing has his carapace and the tremendously long tail studded with a plethora of spikes that will come in handy when confronting yet another nemesis. Just like his movie counterpart, the Anguirus 3D Printing Figurine’s hind limbs are almost twice as long as the forelimbs and allow him to launch attacks and leap at incredible speed. In order to make the model even more dynamic, the author depicted Anguirus with one of the clawed feet ready to strike. Should the Anguirus 3D Printing Figurine join your kaiju army, together they will be indestructible!


Anguirus is a static assembly figurine and its moderation and adaptation for different types of 3D printers took Gambody team 52 hours in total. The huge figurine in its assembly version was divided into as many assembly parts as needed to fit even the smallest 3D printers' build plates and for you to nevertheless receive a giant 3D printed kaiju after assembly. The cutting of Anguirus figurine was chosen by our team to minimise the amount of filament needed for generated support and some of the model’s parts were hollowed out for you to save resin in the model’s Eco version. For you to achieve the cleanest 3D printed result, kaiju’s feet, long spiky tail, carapace, etc. are provided as separate assembly pieces. For the same purpose, the monster’s tongue and upper jaw were extracted from the mouth and are now provided as two separate parts. A lot of bigger spikes on Anguirus’ tail and the horns on the head have also been separated. The model’s rocky platform was divided into four parts to fit the build plates of the average 3D printers. All assembly parts are provided in STL files in recommended positions that were worked out so to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any figurine's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format.

The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from Anguirus' length that is 160000 mm. The 3D printing figurine's chosen scale is 1/250 for the FFF/FDM version and 1/500 for the DLP/SLA/SLS versions.


FFF/FDM 1.0 version features:
- Contains 53 parts;
- A printed model is 245 mm tall, 311 mm wide, 560 mm deep;
- The assembly kit includes lock 53_ge_lock_10H(x33) to connect the model's parts securely without glue that needs to be printed 33 times;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 13 parts;
- A printed model is 124 mm tall, 157 mm wide, 280 mm deep;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:
- Contains 13 parts;
- A printed model is 124 mm tall, 157 mm wide, 280 mm deep;
- Contains some hollowed out parts to save resin.

SLS 1.0 version features:
- Made as solid one-piece figurine;
- A printed model is 124 mm tall, 157 mm wide, 280 mm deep;
- Contains 2 parts - a one-piece Anguirus with the platform separated.


- STL files of Anguirus 3D printing figurine which consist of 81 parts;
- 4 versions of files for this model for FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS;
- High-poly detailed figurine of Anguirus;
Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format;
- Detailed settings that we provide as a recommendation for Cura 3.5.1, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get Anguirus 3D printing figurine​ immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Anguirus 3D printing figurine at Gambody YouTube channel.

Also, you may like other Kaiju Figurines for 3D Printing.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.5.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
    Support Speed: 45 mm/s 
     Support Infill Speed: 45 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 45 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.6562 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 2.2 mm
Support Z Distance: 0.13 mm
    Support Top Distance: 0.13 mm
    Support Bottom Distance: 0.13 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 15 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
  Detect thin walls: Check
  Detect bridging perimeters: Check
  Seam position: Random
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
  Infill/Perimeters overlap: 20%
  Bridge flow ratio: 0.95
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm


comments powered by Disqus

Similar items

Browse more newly listed 3D printings