ED-209 (1987) 3D Printing Model | Assembly + Action

cm: 27.8 w x 28 d x 30.8 h
in: 10.945 w x 11.024 d x 12.126 h

Source Files




Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

ED-209 (1987) 3D Printing Model comes in 2 versions for different 3D printer types (FFF/FDM, DLP/SLA/SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_foot_R_FDM (repaired).s tl
1.63 MiB 7 h 41 min 5 m 51 x 96 x 48 Download
2_finger_back_R_FDM (repa ired).stl
1.02 MiB 47 min <1 m 15 x 39 x 21 Download
3_finger_front_R_FDM (rep aired).stl
3.69 MiB 3 h 51 min 2 m 45 x 58 x 31 Download
4_finger_1_R_FDM (repaire d).stl
3.32 MiB 3 h 27 min 2 m 55 x 45 x 31 Download
5_finger_2_R_FDM (repaire d).stl
3.32 MiB 3 h 24 min 2 m 55 x 45 x 31 Download
9_foot_L_FDM (repaired).s tl
1.63 MiB 7 h 41 min 5 m 51 x 96 x 48 Download
10_finger_back_L_FDM (rep aired).stl
1.02 MiB 47 min <1 m 15 x 39 x 21 Download
11_finger_front_L_FDM (re paired).stl
3.69 MiB 3 h 51 min 2 m 45 x 58 x 31 Download
12_finger_1_L_FDM (repair ed).stl
3.32 MiB 3 h 24 min 2 m Download
13_finger_2_L_FDM (repair ed).stl
3.32 MiB 3 h 27 min 2 m Download
17_shin_R_FDM (repaired). stl
7.13 MiB 19 h 23 min 12 m Download
18_shin_flap_1_R_FDM (rep aired).stl
0.08 MiB 13 min <1 m 16 x 24 x 4 Download
19_shin_flap_2_R_FDM (rep aired).stl
0.08 MiB 13 min <1 m 16 x 24 x 4 Download
20_shin_L_FDM (repaired). stl
7.14 MiB 19 h 33 min 12 m Download
21_shin_flap_1_L_FDM (rep aired).stl
0.08 MiB 13 min <1 m 16 x 24 x 4 Download
22_shin_flap_2_L_FDM (rep aired).stl
0.08 MiB 13 min <1 m 16 x 24 x 4 Download
23_rail_R_FDM (repaired). stl
9.35 MiB 10 h 24 min 5 m Download
24_rail_cap_R_FDM (repair ed).stl
0.26 MiB 1 h 22 min 1 m 31 x 33 x 18 Download
26_rail_L_FDM (repaired). stl
9.35 MiB 10 h 26 min 5 m Download
27_rail_cap_L_FDM (repair ed).stl
0.26 MiB 1 h 22 min 1 m 31 x 33 x 18 Download
29_leg_2_R_FDM (repaired) .stl
1.61 MiB 16 h 43 min 10 m 43 x 56 x 88 Download
33_leg_2_L_FDM (repaired) .stl
1.61 MiB 16 h 32 min 10 m 43 x 56 x 88 Download
37_pelvis_pipe_R_FDM (rep aired).stl
0.15 MiB 2 h 36 min 1 m 47 x 47 x 19 Download
38_pelvis_pipe_L_FDM (rep aired).stl
0.15 MiB 2 h 36 min 1 m 47 x 47 x 19 Download
39_pelvis_FDM (repaired). stl
0.93 MiB 21 h 53 min 13 m 64 x 86 x 82 Download
40_body_1_FDM (repaired). stl
75.19 MiB 58 h 12 min 37 m 145 x 83 x 131 Download
41_body_2_FDM (repaired). stl
6.53 MiB 32 h 15 min 22 m Download
42_body_3_FDM (repaired). stl
1.83 MiB 4 h 10 min 2 m 94 x 63 x 18 Download
43_flap_R_FDM (repaired). stl
1.52 MiB 1 h 8 min 1 m 45 x 43 x 9 Download
44_flap_L_FDM (repaired). stl
1.52 MiB 1 h 9 min 1 m 45 x 43 x 9 Download
45_pipe_R_FDM (repaired). stl
0.48 MiB 16 min <1 m 20 x 69 x 7 Download
46_pipe_L_FDM (repaired). stl
0.48 MiB 16 min <1 m 20 x 69 x 7 Download
47_pipe_center_FDM (repai red).stl
1.00 MiB 12 min <1 m 31 x 33 x 8 Download
48_shoulder_R_FDM (repair ed).stl
14.01 MiB 5 h 27 min 3 m 58 x 58 x 43 Download
49_arm_R_FDM (repaired).s tl
8.34 MiB 11 h 41 min 7 m 51 x 51 x 96 Download
50_arm_gun_R_FDM (repaire d).stl
0.84 MiB 1 h 14 min 1 m 35 x 17 x 33 Download
53_arm_kit_1_R_FDM (repai red).stl
0.19 MiB 43 min <1 m 32 x 28 x 15 Download
54_arm_kit_2_R_FDM (repai red).stl
0.19 MiB 41 min <1 m 32 x 31 x 15 Download
55_arm_L_FDM (repaired).s tl
8.34 MiB 11 h 45 min 7 m 51 x 51 x 96 Download
56_arm_gun_L_FDM (repaire d).stl
0.84 MiB 1 h 15 min 1 m 35 x 17 x 33 Download
59_arm_kit_1_L_FDM (repai red).stl
0.19 MiB 43 min <1 m Download
60_arm_kit_2_L_FDM (repai red).stl
0.19 MiB 43 min <1 m 32 x 31 x 15 Download
61_shoulder_L_FDM (repair ed).stl
14.01 MiB 5 h 27 min 3 m 58 x 58 x 43 Download
62_Ge_lock_10H_x33_FDM (r epaired).stl
0.03 MiB n.a.
19 x 11 x 2 Download
50_v2_arm_gun_R_FDM (repa ired).stl
0.66 MiB 55 min <1 m Download
25_leg_1_R_FDM (repaired) .stl
0.67 MiB 7 h 59 min 5 m 49 x 70 x 49 Download
28_leg_1_L_FDM (repaired) .stl
0.67 MiB 7 h 59 min 5 m 49 x 70 x 49 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min 1 m 150 x 18 x 5 Download
40_1_body_1_FDM (repaired ).stl
9.99 MiB 47 h 32 min 31 m 145 x 82 x 130 Download
40_2_body_1_FDM (repaired ).stl
84.77 MiB n.a.
104 x 127 x 56 Download
63_arm_R_ammo_x3_FDM (rep aired).stl
0.08 MiB 2 min <1 m 3 x 3 x 7 Download
64_arm_R_base_FDM (repair ed).stl
6.66 MiB 52 min <1 m 26 x 34 x 15 Download
65_arm_R_grid_FDM (repair ed).stl
0.76 MiB 6 min <1 m 3 x 11 x 14 Download
66_arm_R_radar_FDM (repai red).stl
0.50 MiB 8 min <1 m 36 x 14 x 2 Download
67_arm_R_rocket_FDM (repa ired).stl
1.56 MiB 45 min <1 m 13 x 24 x 22 Download
6_foot_joint_part_a_R_FDM (repaired).stl
1.23 MiB 2 h 17 min 2 m 39 x 55 x 13 Download
7_foot_joint_part_b_R_FDM (repaired).stl
1.14 MiB 1 h 28 min 1 m 39 x 41 x 13 Download
8_foot_joint_part_c_R_FDM (repaired).stl
0.98 MiB 14 min <1 m 10 x 5 x 13 Download
14_foot_joint_part_a_L_FD M (repaired).stl
1.23 MiB 2 h 17 min 2 m 39 x 55 x 13 Download
15_foot_joint_part_b_L_FD M (repaired).stl
1.14 MiB 1 h 28 min 1 m 39 x 41 x 13 Download
16_foot_joint_part_c_L_FD M (repaired).stl
0.98 MiB 14 min <1 m 10 x 5 x 13 Download
30_leg_joint_part_a_R_FDM (repaired).stl
1.57 MiB 1 h 15 min 1 m 39 x 42 x 9 Download
31_leg_joint_part_b_R_FDM (repaired).stl
1.40 MiB 1 h 12 min 1 m 39 x 42 x 9 Download
34_leg_joint_part_a_L_FDM (repaired).stl
1.57 MiB 1 h 15 min 1 m 39 x 42 x 9 Download
35_leg_joint_part_b_L_FDM (repaired).stl
0.98 MiB 14 min <1 m 10 x 5 x 13 Download
32_leg_joint_part_c_R_FDM (repaired).stl
2.09 MiB 14 min <1 m 10 x 5 x 13 Download
36_leg_joint_part_c_L_FDM (repaired).stl
2.09 MiB 14 min <1 m 10 x 5 x 13 Download
51_arm_joint_R_FDM (repai red).stl
1.79 MiB 37 min <1 m 11 x 12 x 34 Download
52_arm_claw_R_FDM (repair ed).stl
10.10 MiB 34 min <1 m 6 x 26 x 25 Download
57_arm_joint_L_FDM (repai red).stl
1.79 MiB 37 min <1 m 11 x 12 x 34 Download
58_arm_claw_L_FDM (repair ed).stl
10.10 MiB 34 min <1 m 6 x 26 x 25 Download


The large Enforcement Droid of 209 Series, better known as ED-209, was a large robot programmed for law enforcement that starred in the iconic 1987 RoboCop film. There were only a few scenes featuring the armoured ED-209 in the movie but that turned out to be enough for the malfunctioning Droid to acquire the iconic status and take its firm stand in VFX film history. Immediately after the release of the ED-209 model from the 2014 RoboCop remake our team was overwhelmed with the franchise fans’ requests who were eager to see the original and well-loved Enforcement Droid. Thankfully, the author of the first peacekeeping machine for 3D printing was delighted with general enthusiasm so wasted no time and got down to the project at once. It took the 3D artist circa 145 hours for all RoboCop fans to get the very original menacing Droid for 3D printing. ED-209 model is made with patrol robot’s signature radar-like head, “metal” grating around the front of the head and a grill mouth. As expected, the bossy street fighter for 3D printing is depicted with large machine guns for arms that are equipped with two left 20 mm cannons, right 20 mm cannon and heat-seeking missile launcher. The machine-gun wielding ED-209 for 3D printing looks absolutely ready to wreak havoc while engaged in its ”urban pacification” duty! Order the STL files of the classic villainous Droid and 3D print your own coolest movie robot of all time!


ED-209 (1987) 3D printing model is an action assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 46 hours in total. In order to ensure the droid’s multidirectional movement, the model was divided into many assembly parts and special mechanisms were introduced into all model’s joints to give you an opportunity to display ED-209 in a variety of positions, i.e. robot’s body, hips, front and rear toes etc. are movable and knee joints slide up to make the robot taller. With the same purpose, the robot’s gun pods can make a full rotation. To allow the multidirectional movement and rotation of the droid model, the ball-and-socket joints were introduced. For the articulated robot to stand firm in any position you may choose, the feet and hip joints are provided with locking mechanism. The joints that ensure the robot’s movability are provided as separate files as well for you to be able to print them again if the joints' friction happens to lose rigidity. All assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. Model’s assembly requires additional “pins” to secure the parts. These pins do not come in STL files but can be made out of short pieces of regular 1.75 PLA. We highly recommend that you watch "Assembly video" in the photo preview section before assembling the Droid. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from ED-209's actual height that is 2400 mm. The 3D printing model's chosen scale is 1/8 for FFF/FDM version and 1/16 for DLP/SLA/SLS version.


FFF/FDM 1.0 version features:
- Contains 62 parts;
- A printed model is 308 mm tall, 278 mm wide, 280 mm deep;
- Made with several sets of special joints to ensure the model's articulation;
- Assembly kit includes lock 62_Ge_lock_10H_x33 to connect the parts without glue that needs to be printed 33 times;
- Model’s assembly requires additional “pins” to secure the parts. These pins do not come in STL files but can be made out of short pieces of regular 1.75 PLA;
- It is recommended to print parts 30_leg_joint_part_a_R and 34_leg_joint_part_a_L with 100% Infill;
- All parts are divided in such a way that you will print them with the smallest number of support structures and so to ensure the smoothness of the details’ surfaces.

DLP/SLA/SLS 1.0 version features:
- Contains 27 parts;
- A printed model is 154 mm tall, 139 mm wide, 140 mm deep;
- Made with special joints to ensure the model's articulation;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.


- STL files of ED-209​ (1987)​ 3D Printing Model which consist of 89 parts;
- 2 versions of files of this model for FFF/FDM and DLP/SLA/SLS printers;
- High-poly detailed model of ED-209​ (1987)​;
Assembly Manual for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format;
- Detailed settings that we provide as a recommendation for Cura , Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the model of ED-209​ (1987)​ for 3D printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble ED-209​ (1987) 3D Printing Model at Gambody YouTube channel.

Also, you may like ED-209 (2014) 3D Printing Model as well as other Robot 3D Printing Models.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at support@gambody.com)


You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
  Detect thin walls: Check
  Detect bridging perimeters: Check
  Seam position: Random
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
  Infill/Perimeters overlap: 20%
  Bridge flow ratio: 0.95
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm


comments powered by Disqus

Similar items

Browse more newly listed 3D printings