Make pre-order

(3)
big
cm: 14 w x 7.7 d x 29.2 h
in: 5.512 w x 3.031 d x 11.496 h
5
BUY FOR  $24.99

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Version 1 and Version 2 are the files for Gipsy Avenger 3D Model optimized for 3D printing, the preview pictures of which you see above.

It is recommended:

  • to print Version 1 STL files on FDM/FFF 3D printers;
  • to print Version 2 STL files on DLP/SLA/SLS 3D printers.
File Name File Size Time / Filament
2_back_w_R.stl
0.14 MiB 1 h 10 min
1 m
Download
3_back_w_L.stl
0.14 MiB 1 h 8 min
1 m
Download
4_reactor_1.stl
0.38 MiB 32 min
<1 m
Download
5_reactor_2.stl
0.56 MiB 9 min
<1 m
Download
6_body_shield.stl
0.53 MiB 26 min
<1 m
Download
7_head.stl
5.17 MiB 1 h 53 min
1 m
Download
8_hand_R.stl
1.06 MiB 46 min
<1 m
Download
9_arm_1_R.stl
3.95 MiB 1 h 44 min
1 m
Download
10_hand_L.stl
1.07 MiB 47 min
<1 m
Download
11_arm_1_L.stl
3.95 MiB 1 h 43 min
1 m
Download
12_cubit_twin_claw (x2).s tl
0.07 MiB 6 min
<1 m
Download
13_arm_2_R.stl
2.99 MiB 1 h 35 min
1 m
Download
14_arm_2_L.stl
2.99 MiB 1 h 35 min
1 m
Download
15_shoulder_connector_R.s tl
0.29 MiB 23 min
<1 m
Download
16_shoulder_connector_L.s tl
0.29 MiB 23 min
<1 m
Download
17_shoulder_R.stl
6.59 MiB 2 h 32 min
2 m
Download
18_shoulder_L.stl
6.59 MiB 2 h 30 min
2 m
Download
19_pelvis.stl
2.74 MiB 4 h 53 min
3 m
Download
20_leg_1_R.stl
7.08 MiB 4 h 28 min
3 m
Download
21_leg_1_L.stl
7.08 MiB 4 h 31 min
3 m
Download
22_A_Claw (x4).STL
0.15 MiB 8 min
<1 m
Download
23_Axis_2_A_Joint (x4).st l
0.38 MiB 24 min
<1 m
Download
24_Ge_lock_7S (x2).STL
0.02 MiB 3 min
<1 m
Download
25_knee_twin_claw (x2).st l
0.08 MiB 10 min
<1 m
Download
26_leg_2_R.stl
4.54 MiB 3 h 17 min
2 m
Download
27_leg_2_L.stl
4.53 MiB 3 h 19 min
2 m
Download
28_foot_R.stl
3.14 MiB 1 h 23 min
1 m
Download
29_foot_L.stl
3.14 MiB 1 h 22 min
1 m
Download
30_Axis_2_A_Joint_v2 (x2) .stl
0.27 MiB 22 min
<1 m
Download
31_A_Claw_v2 (x2).STL
0.30 MiB 9 min
<1 m
Download
1_body.stl
25.74 MiB 20 h 44 min
14 m
Download

HISTORY OF GIPSY AVANGER

Gipsy Avenger is a huge robot from the movie where there is a large-scale conflict between otherworldly monsters that destroy everything in their path. Gipsy Avenger is one of those who was created to deal with them. Jake Pentecost is a young and promising pilot of the Jaeger. His father became a legend giving his life for the sake of ensuring the victory of mankind in the battle against the monstrous Kaiju. The guy gets the last chance to become a worthy heir to his father and he was entrusted to manage Gipsy Avenger. He joins other pilots and with the help of these incredible machines, armed with the most modern weapons that are the achievement of all mankind they must face danger and save the whole world.

ABOUT THIS 3D MODEL

The model is saved in STL files, a format supported by most 3D printers

FDM version features:
- Contain 31 parts;
- Made with Locks for better fixing. One part of Lock (24_Ge_lock_7S (x2)) you need to print twice.
- Made with Claws and Joints for saving all movable details as in original robot.
  -One part of Twin Claw (12_cubit_twin_claw (x2)) you need to print twice.
  -One part of Claw (22_A_Claw (x4)) you need to print 4 times.
  -One part of Joint (23_Axis_2_A_Joint (x4)) you need to print 4 times.
  -One part of Twin Claw (25_knee_twin_claw (x2)) you need to print twice.
  -One part of Joint (30_Axis_2_A_Joint_v2 (x2)) you need to print twice.
  -One part of Claw_v2 (31_A_Claw_v2 (x2)) you need to print twice;
- All parts are divided in such way that you will print them with the smallest amount of supports.

SLS/SLA version features:
- Same as FDM but smaller and made as 17 parts with saving al movable elements.

All STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for CURA 3.2.1. Software.

There are 31 parts for FFF/FDM version and 17 parts for SLS/SLA version.

Scale: His tall in life is 58500 mm. Model made as 1/200 scale in FDM version and 1/400 in SLS/SLA version.

FDM version dimensions:
After being printed will stand - 292 mm tall, 140 mm wide, 77 mm deep;

SLS/SLA version dimensions:
After being printed will stand - 146 mm tall, 70 mm wide, 39 mm deep;

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Gipsy Avenger 3D Model for 3D printing which consist of 48 parts;
- 2 versions of files for this model for FFF/FDM and SLS/SLA;
- Made with saving all movable elements
- Model fixed by the Locks, Joints, and Claws;
- High-poly detailed model of Gipsy Avenger;
- Detailed settings that we provide for Cura 3.2.1. for the best print;
- Full technical support from the Gambody Support Team.

Watch the tutorial video on how to assemble Gipsy Avenger 3D Printing Model at Gambody YouTube channel.

You can get Model of Gipsy Avenger for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Also, you may like other Jaegers 3D Printing Models.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.2.1 and printed on an Ultimaker 2 in PLA material.

Recommendations: For all parts of Locks and Claws you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill 
Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material 
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Speed 
Print Speed: 45 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
Travel Speed: 120 mm/s
Initial Layer Speed: 30 mm/s
  Initial Layer Print Speed: 30 mm/s
  Initial Layer Travel Speed: 60 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 1.3333 mm
Support Z Distance: 0.3 mm
    Support Top Distance: 0.3 mm
    Support Bottom Distance: 0.3 mm
Support X/Y Distance: 0.7 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.2 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus
Other author's 3D printings

Tags

Pacific Rim, Jaeger, Gipsy Avenger, Assembly, Robot

Similar items

Browse more newly listed 3D printings