Make pre-order

(2)
average
cm: 21.4 w x 8 d x 31.2 h
in: 8.425 w x 3.15 d x 12.283 h
14
BUY FOR  $24.99

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Version 1 and Version 2 are the files for The Iron Giant 3D Model optimized for 3D printing, the preview pictures of which you see above.

It is recommended:

  • to print Version 1 STL files on FDM/FFF 3D printers;
  • to print Version 2 STL files on DLP/SLA/SLS 3D printers.
File Name File Size Time / Filament
1_f1 (x6).stl
0.18 MiB 2 min
<1 m
Download
2_f2 (x12).stl
0.66 MiB 3 min
<1 m
Download
3_f3 (x2).stl
0.18 MiB 2 min
<1 m
Download
4_f2_b (x2).stl
0.67 MiB 4 min
<1 m
Download
5_hand_R.stl
1.03 MiB 22 min
<1 m
Download
6_hand_L.stl
1.03 MiB 22 min
<1 m
Download
7_hand_Connector (x2).stl
0.21 MiB 12 min
<1 m
Download
8_arm_1_R.stl
3.15 MiB 1 h 41 min
1 m
Download
9_arm_1_L.stl
3.14 MiB 1 h 42 min
1 m
Download
10_A_Claw (x5).stl
0.15 MiB 8 min
<1 m
Download
11_arm_2_R.stl
0.31 MiB 44 min
<1 m
Download
12_arm_2_L.stl
0.31 MiB 44 min
<1 m
Download
13_arm_3_R.stl
0.56 MiB 1 h 3 min
1 m
Download
14_arm_3_L.stl
0.56 MiB 1 h 3 min
1 m
Download
15_arm_3_shell (x2).stl
0.09 MiB 13 min
<1 m
Download
16_Axis_2_A_2_Joint (x2). stl
0.28 MiB 34 min
<1 m
Download
17_torso.stl
27.23 MiB 34 h 26 min
24 m
Download
18_head.stl
1.35 MiB 1 h 35 min
1 m
Download
19_jaw.stl
0.43 MiB 28 min
<1 m
Download
20_Axis_2_A_Joint.stl
0.28 MiB 24 min
<1 m
Download
22_leg_cap (x2).stl
0.01 MiB 5 min
<1 m
Download
23_pelvis.stl
6.80 MiB 10 h 48 min
8 m
Download
28_piston_1 (x2).stl
0.15 MiB 16 min
<1 m
Download
29_piston_2 (x2).stl
0.11 MiB 5 min
<1 m
Download
30_Axis_2_A_3_Joint (x2). stl
0.28 MiB 34 min
<1 m
Download
31_foot_claw (x4).stl
0.02 MiB 4 min
<1 m
Download
32_foot_2_R.stl
0.89 MiB 40 min
<1 m
Download
33_foot_2_L.stl
0.89 MiB 40 min
<1 m
Download
35_foot_1_L.stl
0.59 MiB 1 h 45 min
1 m
Download
36_foot_1_R.stl
0.59 MiB 1 h 45 min
1 m
Download
37_Ge_lock_10S (x4).stl
0.02 MiB 4 min
<1 m
Download
38_belly.stl
0.97 MiB 6 h 19 min
4 m
Download
39_Axis_2_B_Joint.stl
0.35 MiB 35 min
<1 m
Download
40_B_Claw.STL
0.16 MiB 15 min
<1 m
Download
20_leg_3_R.stl
1.38 MiB 2 h 47 min
2 m
Download
21_leg_3_L.stl
1.38 MiB 2 h 47 min
2 m
Download
24_leg_2_R_v2 (repaired). stl
0.28 MiB 58 min
<1 m
Download
25_leg_2_L_v2 (repaired). stl
0.28 MiB 57 min
<1 m
Download
26_leg_1_L_v2 (repaired). stl
4.65 MiB 3 h 18 min
2 m
Download
27_leg_1_R_v2 (repaired). stl
4.65 MiB 3 h 18 min
2 m
Download

HISTORY OF THE IRON GIANT

A giant robot that comes to Earth from a distant cosmic galaxy. Despite its formidable appearance, the alien is the kindest creature. He makes friends with a brave boy. Hogarth explains to the giant what is good and evil. He shows to him comics like Superman and Atomo villain. Together with his friend Sculptor Dean, they hide the robot from everyone, including from secret agent Kent Mansley who found a boy's toy gun near the damaged power plant and began to suspect Hogarth. Later it turns out that the Giant reflexively attacks those who attack him and because of this, almost injures Hogarth. When Dean unravels it they go to look for him. Seeing the giant standing in the city where he had just saved two boys the military take this as an attack and begin to attack him. Mansley so wants to destroy the scary robot that he lied to General Rogard about the murder of giant Hogarth. As a result, the soldiers bring the giant to the transition to combat mode in which he continues to follow the same pattern as in self-defense. The general brings into combat mode the submarine Nautilus with the aim of destroying the giant. Hogarth succeeds in appeasing his friend and Dean explains to the general the true essence of things. The general understands everything and decides to cancel the attack but Mansley, who has been scared, orders to launch a nuclear missile involuntarily sending it directly to the city. The giant decides to save the city's population and flies into the stratosphere where it collides with a rocket and dies from a nuclear explosion. Subsequently, a monument to the Giant was built in the city by Dean. General Rogard gave Hogarth a bolt the only detail of the steel giant that he managed to find. However, on the same night, the robot begins to recover.

ABOUT THIS 3D MODEL

The model is saved in STL files, a format supported by most 3D printers

FDM version features:
- Contain 39 parts;
- Made with the maximum number of movable elements;
- Made with Locks for better fixing of model parts;
- Hands can rotate thanks to different parts of the joints;
- Head, torso, legs can also rotates thanks to special joints that are integrated into the design of the model;
- Special fingers that can bend will add more options to you to create the pose of this model;
- All parts are divided in such way that you will print them with the smallest amount of supports

SLS/SLA version features:
- Same as FDM but smaller and made as 1 part.

All STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for CURA 3.2.1. Software.

There are 39 parts for FFF/FDM version and 1 part for SLS/SLA version.

Scale: His tall in life is 15240 mm. Model made as 1/50 scale in FDM version and 1/100 in SLS/SLA version.

FDM version dimensions:
After being printed will stand - 312 mm tall, 214 mm wide, 80 mm deep;

SLS/SLA version dimensions:
After being printed will stand - 156 mm tall, 107 mm wide, 38 mm deep;

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of The Iron Giant 3D Model for 3D printing which consist of 40 parts;
- 2 versions of files for this model for FFF/FDM and SLS/SLA;
- Model with the maximum number of movable elements;
- Model fixed by the Locks, Joints, Claws and Pistons;
- High-poly detailed model of The Iron Giant;
- Detailed settings that we provide for Cura 3.2.1. for the best print;
- Full technical support from the Gambody Support Team.

Watch the tutorial video on how to assemble The Iron Giant 3D Printing Miniature at Gambody YouTube channel.

You can get Model of The Iron Giant​ for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Also, you may like other heroes 3D Printing Models.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.2.1 and printed on an Ultimaker 2 in PLA material.

Recommendations: For all parts of Locks and Claws you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill 
Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material 
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Speed 
Print Speed: 45 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
Travel Speed: 120 mm/s
Initial Layer Speed: 30 mm/s
  Initial Layer Print Speed: 30 mm/s
  Initial Layer Travel Speed: 60 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 1.3333 mm
Support Z Distance: 0.3 mm
    Support Top Distance: 0.3 mm
    Support Bottom Distance: 0.3 mm
Support X/Y Distance: 0.7 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.2 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks and claws use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus
Other author's 3D printings

Tags

Iron Giant, Robot, Assembly, Action, Mech

Similar items

Browse more newly listed 3D printings