Make pre-order

Tekkaman 3D Printing Figurine | Assembly

average
cm: 16.4 w x 16.4 d x 28 h
in: 6.457 w x 6.457 d x 11.024 h
5
BUY FOR  $24.99

Source Files

|

Description

|

Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Tekkaman 3D Printing Figurine comes in 4 versions for FFF/FDM and DLP/SLA/SLS 3D printers. Files for each version are available for download after purchase.

Detailed information about this 3D printing figurine is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
20.84 MiB 1 h 59 min
1 m
29 x 34 x 52 Download
2_body_FDM(repaired).stl
27.38 MiB 6 h 55 min
4 m
55 x 52 x 57 Download
3_pelvis_FDM(repaired).st l
17.40 MiB 2 h 37 min
1 m
Download
4_arm_R_1_FDM(repaired).s tl
16.42 MiB 2 h 5 min
1 m
Download
5_arm_R_2_FDM(repaired).s tl
17.72 MiB 1 h 1 min
1 m
24 x 30 x 44 Download
6_hand_R_FDM(repaired).st l
9.51 MiB 27 min
<1 m
15 x 15 x 21 Download
7_arm_L_1_FDM(repaired).s tl
16.51 MiB 1 h 56 min
1 m
47 x 31 x 39 Download
8_arm_L_2_FDM(repaired).s tl
15.78 MiB 1 h 2 min
1 m
26 x 24 x 43 Download
9_hand_L_FDM(repaired).st l
9.41 MiB 21 min
<1 m
15 x 11 x 17 Download
10_leg_R_FDM(repaired).st l
19.79 MiB 1 h 58 min
1 m
30 x 26 x 66 Download
11_leg_L_FDM(repaired).st l
19.02 MiB 1 h 52 min
1 m
Download
12_foot_R_FDM(repaired).s tl
18.32 MiB n.a.
n.a.
37 x 38 x 66 Download
13_spur_R_FDM(repaired).s tl
8.84 MiB 13 min
<1 m
Download
14_foot_L_FDM(repaired).s tl
19.35 MiB 1 h 50 min
1 m
Download
15_spur_L_FDM(repaired).s tl
9.24 MiB 13 min
<1 m
3 x 13 x 18 Download
16_shoulder_strap_R_FDM(r epaired).stl
16.21 MiB 3 h 10 min
2 m
Download
17_shoulder_strap_L_FDM(r epaired).stl
16.48 MiB 3 h 15 min
2 m
Download
18_knife_R_FDM(repaired). stl
9.53 MiB 20 min
<1 m
13 x 31 x 13 Download
19_knife_L_FDM(repaired). stl
8.62 MiB 19 min
<1 m
30 x 12 x 12 Download
20_blade_1_FDM(repaired). stl
20.19 MiB 40 min
<1 m
Download
21_blade_2_FDM(repaired). stl
25.43 MiB 40 min
<1 m
Download
22_handle_FDM(repaired).s tl
4.97 MiB 11 min
<1 m
5 x 4 x 21 Download
23_platform_FDM(repaired) .stl
28.00 MiB 13 h 40 min
8 m
Download
24_ge_lock_7S(x1)_FDM.stl
0.02 MiB 3 min
<1 m
7 x 18 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min
1 m
150 x 18 x 5 Download

ABOUT THIS 3D FIGURINE

Tekkaman is the titular character of the 1975 Japanese anime series, a super-human cyborg transformed into a weapon against the unexpected Waldaster alien threat. In order to thwart Waldaster's fleets, the scientific genius Dr Amachi reveals the Pegas, a formidable semi-sentient robot that is equipped with a highly advanced transformation chamber. The human being who is subjected to the transformation into a Tekkaman becomes a super cyborg, covered in an invulnerable armour and equipped with deadly weapons such as the Tek Lance, the Tek Whip, and the Voltekker that are capable of cutting and melting metals like butter. The author of the Tekkaman figurine for 3D printing mentioned being inspired by Tatsuo Yoshida’s design of the powerful cyborg and decided to prepare the Space Knight model for 3D printing rejoicing all anime fans within the community. The 3D artist carefully outlined the signature features of the Tekkaman armour design, making sure that the super-human sculpt is strong and brawny. Thus, the protagonist of the anime series for 3D printing is depicted holding a long “Tek Lance” that comprises two sharp triangular blades connected by a handle in the middle. The 3D printing figurine is proudly showcasing its large shoulder pads with sharp accents that clearly wait impatiently for being printed red. Tekkaman’s signature head crest and the star protruding from the centre of the cyborg’s belt are depicted in the design of the 3D printing figurine without fail as well. The 3D artist also paid close attention to such fine details like the armour’s weapon holsters and blade-like spurs guaranteeing an exciting 3D printing project that is interesting to print, assemble and paint. With the abundance of sharp elements like thorns on the armours shins, forearms, helmet or shoulders and with the Tek Lance on high alert, Tekkaman figurine for 3D printing looks perfectly ready to impale all alien foes on his way! 

ADAPTATION FOR 3D PRINTING

Tekkaman figurine for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 42 hours in total. The figurine’s anatomy was thoroughly reviewed during the moderation process for the mighty knight to be depicted harmoniously in the intended pose in his complex suit of armour. The figurine’s cutting was chosen by our team to minimise the amount of filament needed for generated support and some of the parts were hollowed out for you to save resin in the model’s Eco version. In order to conceal the places where assembly parts of the model must be connected, Tekkaman model was cut along the contour of its armour seams. For you to achieve the cleanest 3D printed result, Tekkaman’s spiky helm, shoulder pads, forearm armour, hands, weapon holsters, boots, blade-like spurs, Tek Lance etc. are provided as separate assembly pieces. All assembly parts are provided in STL files in recommended positions that were worked out so to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any figurine's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format.

The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from Tekkaman's actual height that is 1850 mm. The 3D printing figurine's chosen scale is 1/8 for the FFF/FDM version and 1/16 for the DLP/SLA/SLS versions.

VERSION SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 24 parts;
- A printed model is 280 mm tall, 164 mm wide, 164 mm deep;
- Assembly kit includes lock 24_ge_lock_7S(x1) to attach the figurine's body to legs securely without glue that needs to be printed once;
- Tek Lance that is to be inserted into knight's hands comes in two separate parts;
- Made with a platform to resemble Tekkaman's signature head crest;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 11 parts;
- A printed model is 140 mm tall, 82 mm wide, 82 mm deep;
- Tek Lance that is to be inserted into knight's hands comes in two separate parts;
- Made with a platform to resemble Tekkaman's signature head crest;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:
- Contains 11 parts;
- A printed model is 140 mm tall, 82 mm wide, 82 mm deep;
- Tek Lance that is to be inserted into knight's hands comes in two separate parts;
- Made with a platform to resemble Tekkaman's signature head crest;
- Contains some hollowed out parts to save resin.

SLS 1.0 version features:
- Made as a solid one-piece figurine;
- A printed model is 140 mm tall, 82 mm wide, 82 mm deep;
- Contains 3 parts - a one-piece model and the figurine with the platform separated.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Tekkaman Figurine for 3D printing which consist of 49 parts;
- 4 versions of files for this model for FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS;
- High-poly detailed figurine of Tekkaman;
Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format;
- Detailed settings that we provide as a recommendation for Cura 3.5.1, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the figurine of Tekkaman​ for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the figurine's page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Tekkaman 3D Printing Figurine at Gambody YouTube channel.

Also, you may like other Robot 3D Printing Models, as well as other Anime 3D Printing Figurines.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.5.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill 
Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material 
Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Speed 
Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
    Support Speed: 45 mm/s 
     Support Infill Speed: 45 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 45 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.6562 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 2.2 mm
Support Z Distance: 0.13 mm
    Support Top Distance: 0.13 mm
    Support Bottom Distance: 0.13 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 15 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings