Make pre-order

cm: 11.153 w x 12.992 d x 16 h
in: 4.391 w x 5.115 d x 6.299 h
BUY FOR  $14.99

Source Files




Printing Details

This 3D model consists of files in StereoLithography (.STL) format that have been optimized for 3D printing.

Download parts kratos_sword_L and kratos_wolf_R for free to check the printability and test the quality before buying all STL files of the 3D model.

Download Free Samples

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
kratos_kratos body (repai red) (repaired).stl
28.17 MiB 24 h 24 min
15 m
kratos_sword_L (repaired) (repaired).stl
34.63 MiB 2 h 9 min
1 m
kratos_sword_R (repaired) (repaired).stl
31.71 MiB 2 h 4 min
1 m
kratos_wolf_L (repaired) (repaired).stl
10.89 MiB 2 h 51 min
2 m
kratos_wolf_R (repaired) (repaired).stl
10.89 MiB 2 h 56 min
2 m
kratos_kratos body_v2 (re paired) (repaired).STL
28.63 MiB 24 h 54 min
15 m

Ruthless and feared even by the Gods, Kratos model is the 3D representation of the epic action character that will become the best item in any collection. He is wise, dark and daring and he is not afraid to challenge Titans and Zeus himself and defeat all of them.

We created this 3D model in all its glory, taking into account all the small details. It is 111,5mm wide, 160mm tall and 130mm deep, it is available in static form and is mounted on a watermarked base.

Kratos 3D design has been adapted and tested for 3D printing. Therefore Kratos 3D model you create from our design will be printed seamlessly and without problems. More importantly, you will be able to print this model on two different types of printers: FFF and SLA/SLS, which will eliminate the necessity to waste a lot of cash on the expensive 3D printing machine to get a decent result.

Kratos will be a great addition to any action figure scene or collection. You will also be able to use him as a board piece for any God of War related board game.

Buy God of War Kratos 3D model by clicking on the “Buy” button in the top-right corner of the page. Proceed to checkout, enter your PayPal account of credit card details and download STL files.

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:


  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups for figure:

  • Infill speed: 50mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4

Speed setups for axes: It is recommended to print the axes at 0.1mm layer height.

  • Infill speed: 50mm/s
  • Outer shell speed: 20mm/s
  • Inner shell speed: 20mm/s
  • Top/Bottom speed: 20mm/s
  • Support speed: 30mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 20mm/s
  • Amount of slower layers: 4


  • Infill pattern: Grid
  • Line distance: 3mm
  • Infill overlap: 20%
  • Infill layers: 0


  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Lines
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.


comments powered by Disqus
Other author's 3D printings


god of war, Kratos, video games, games characters, ascension, games models, scale models, action figures

Similar items

Browse more newly listed 3D printings