Premium Stock

MWO Timber Wolf 3D Printing Model | Assembly + Action

(30)
cm: 19 w x 15 d x 26.3 h
in: 7.48 w x 5.906 d x 10.354 h

Source Files

|

Description

|

Printing Details

This 3D model of MWO Timber Wolf consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 5 versions of MWO Timber Wolf STL files for FFF/FDM and DLP/SLA - files for all versions are available for download after the purchase;
  • STL files of high-poly MWO Timber Wolf Model for 3D printing consist of 188 files;
  • Sizes for:
  • FFF/FDM 3.0: 263 mm tall, 190 mm wide, 150 mm deep;
  • DLP/SLA: 158 mm tall, 115 mm wide, 90 mm deep;
  • Assembly Manual for FFF/FDM 3.0 and DLP/SLA 2.0 versions in PDF and video formats;
  • Detailed settings that we provide as a recommendation for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
Timber_1 (repaired) (repa ired).stl
2.09 MiB 9 h 4 min 5 m 81 x 95 x 29 Download
Timber_1L (repaired) (rep aired).stl
3.86 MiB 5 h 4 min 3 m 47 x 41 x 40 Download
Timber_1R (repaired) (rep aired).stl
3.86 MiB 5 h 5 min 3 m 47 x 41 x 40 Download
Timber_2 (repaired) (repa ired).stl
25.70 MiB 15 h 33 min 9 m 81 x 68 x 93 Download
Timber_2L (repaired) (rep aired).stl
0.54 MiB 2 h 42 min 2 m 29 x 37 x 46 Download
Timber_2R (repaired) (rep aired).stl
0.54 MiB 2 h 43 min 2 m 29 x 37 x 46 Download
Timber_3 (repaired) (repa ired).stl
7.01 MiB 8 h 20 min 5 m 56 x 64 x 42 Download
Timber_4 (repaired) (repa ired).stl
0.22 MiB 14 min <1 m 6 x 9 x 17 Download
Timber_4L (repaired) (rep aired).stl
0.06 MiB 8 min <1 m 14 x 18 x 4 Download
Timber_4R (repaired) (rep aired).stl
0.06 MiB 8 min <1 m 14 x 18 x 4 Download
Timber_5L (repaired) (rep aired).stl
0.38 MiB 56 min 1 m 24 x 20 x 29 Download
Timber_5R (repaired) (rep aired).stl
0.38 MiB 56 min 1 m 24 x 20 x 29 Download
Timber_6L (repaired) (rep aired).stl
1.28 MiB 3 h 23 min 2 m 39 x 33 x 50 Download
Timber_6R (repaired) (rep aired).stl
1.28 MiB 3 h 25 min 2 m 39 x 33 x 50 Download
Timber_7L (repaired) (rep aired).stl
2.75 MiB 4 h 39 min 3 m 22 x 53 x 78 Download
Timber_7R (repaired) (rep aired).stl
2.75 MiB 4 h 42 min 3 m 22 x 53 x 78 Download
Timber_8L (repaired) (rep aired).stl
0.40 MiB 48 min <1 m 24 x 24 x 39 Download
Timber_8R (repaired) (rep aired).stl
0.40 MiB 48 min <1 m 24 x 24 x 39 Download
Timber_9L (repaired) (rep aired).stl
0.31 MiB 15 min <1 m 16 x 16 x 9 Download
Timber_9R (repaired) (rep aired).stl
0.31 MiB 15 min <1 m 16 x 16 x 9 Download
Timber_10L (repaired) (re paired).stl
0.58 MiB 48 min <1 m 20 x 20 x 32 Download
Timber_10R (repaired) (re paired).stl
0.58 MiB 48 min <1 m 20 x 20 x 32 Download
Timber_11L (repaired) (re paired).stl
0.30 MiB 16 min <1 m 18 x 18 x 8 Download
Timber_11R (repaired) (re paired).stl
0.30 MiB 16 min <1 m 18 x 18 x 8 Download
Timber_12L (repaired) (re paired).stl
1.18 MiB 3 h 49 min 2 m 53 x 70 x 29 Download
Timber_12R (repaired) (re paired).stl
1.18 MiB 3 h 49 min 2 m 53 x 70 x 29 Download
Timber_13R (repaired) (re paired).stl
1.70 MiB 7 h 24 min 4 m 40 x 108 x 41 Download
Timber_14L (repaired) (re paired).stl
0.92 MiB 1 h 36 min 1 m 18 x 36 x 32 Download
Timber_14R (repaired) (re paired).stl
0.91 MiB 1 h 35 min 1 m 18 x 36 x 32 Download
Timber_15L (repaired) (re paired).stl
0.19 MiB 27 min <1 m 17 x 24 x 22 Download
Timber_15R (repaired) (re paired).stl
0.20 MiB 28 min <1 m 17 x 24 x 22 Download
Timber_16L (repaired) (re paired).stl
0.13 MiB 15 min <1 m 12 x 20 x 12 Download
Timber_16R (repaired) (re paired).stl
0.12 MiB 15 min <1 m 12 x 20 x 12 Download
Timber_17L (repaired) (re paired).stl
0.39 MiB 30 min <1 m 18 x 34 x 11 Download
Timber_17R (repaired) (re paired).stl
0.39 MiB 30 min <1 m 18 x 34 x 11 Download
3L (repaired).stl
0.95 MiB 2 h 35 min 1 m 25 x 26 x 51 Download
3R (repaired).stl
0.95 MiB 2 h 36 min 1 m 25 x 26 x 51 Download
centre torso plug.stl
0.09 MiB 10 min <1 m 8 x 9 x 10 Download
L arms plug.stl
0.82 MiB 1 h 30 min 1 m 18 x 32 x 36 Download
L shoulders plug.stl
0.09 MiB 1 h 3 min 1 m 37 x 21 x 16 Download
L torso plug.stl
0.09 MiB 10 min <1 m 8 x 18 x 8 Download
R arms plug.stl
0.82 MiB 1 h 30 min 1 m 18 x 32 x 36 Download
R shoulders plug.stl
0.09 MiB 1 h 4 min 1 m 37 x 21 x 16 Download
R torso plug.stl
0.09 MiB 10 min <1 m 8 x 18 x 8 Download
Timber_13L (repaired) (re paired).stl
1.71 MiB 7 h 53 min 4 m 40 x 108 x 41 Download
...

ABOUT THIS 3D MODEL

Timber Wolf 3D model, or MadCat 3D model as it is known by gamers, is a fast and heavy bipedal vehicle engaged in the battles that take place in the BattleTech Universe of the popular video game. This machine has more aggressive looks than the Catapult 3D model. Its design is a cross-over between the Marauder and the Catapult model designs, thus its name MadCat.

The in-game model is a powerful weapon in combats: it can shoot close and far-range fire; equipped with powerful weaponry and heavy armor, it is inconceivable how this seventy five tons mech could move swiftly on the battlefield and take part in most assaults. Just as with Catapult 3D printing gaming figurine, in-game MadCat can be customized with additional weaponry, as soon as the players level up.

ADAPTATION FOR 3D PRINTING

The Timber Wolf model for 3D printing is an active assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 97 hours in total.

For you to receive the cleanest 3D printing result possible, minimize the amount of filament needed for generated support, and make use of the active elements designed by Gambody Engineers, the mech was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 3.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won’t face difficulties when placing the parts on a build plate. When downloading any model’s file you will also receive “Assembly Manual” for FFF/FDM 3.0 and DLP/SLA 2.0 versions in PDF and video formats. We highly recommend that you get acquainted with the “Assembly Video” and “Assembly Manual” before getting down to the Timber Wolf 3D printing model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model’s scale was calculated from the height of the mech. The 3D printing model’s chosen scales are 1:60 for the FFF/FDM version and 1:100 for the DLP/SLA version.

VERSIONS’ SPECIFICATIONS

FFF/FDM 3.0 version features:

  • Contains 49 parts;
  • A printed model is 263 mm tall, 190 mm wide, 150 mm deep;
  • Posable torso on a ratchet mechanism;
  • Elbows can bend;
  • Movable shoulders;
  • Multidirectional movements of the hips;
  • Bendable knees;
  • Articulated feet;
  • You can install the battery and LED lighting inside the mech;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 2.0 version features:

  • Contains 29 parts;
  • A printed model is 158 mm tall, 115 mm wide, 90 mm deep;
  • New body cutting;
  • Reworked joints in legs and torso.

FFF/FDM 2.0 version features:

  • Contains 54 parts;
  • A printed model is 267 mm tall, 191 mm wide, 147 mm deep;
  • Made with new joints;
  • All movable elements of the Mech were saved.
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

  • Contains 11 parts;
  • A printed model is 161 mm tall, 115 mm wide, 88 mm deep;
  • Made with new joints;
  • All movable elements of the Mech were saved;
  • Has as few details as possible to keep printing costs down.

All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

You can get the MWO Timber Wolf model for 3D printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble a MWO Timber Wolf 3D Printing Model on Gambody YouTube channel.

Also, you may like other MechWarrior 3D Printing Models.

________

FAQ

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings