Make pre-order

(9)
average
cm: 24.1 w x 13.1 d x 32.4 h
in: 9.488 w x 5.157 d x 12.756 h
27
BUY FOR  $26.99

Source Files

|

Description

|

Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Version 2 and Version 3 are the new files for MWO Atlas 3D Model optimized for 3D printing, the preview pictures of which you see above.

It is recommended:

  • Version 1 STL files on FDM/FFF 3D printers - old version with old joints;
  • Version 2 STL files on FDM/FFF 3D printers - new version with new slace and new joints;
  • Version 3 STL files on DLP/SLA/SLS 3D printers - new version with new slace and new joints.
File Name File Size Time / Filament
1_head.stl
1.46 MiB 5 h 43 min
3 m
Download
2_body.stl
3.74 MiB 50 h 57 min
32 m
Download
3_body_weapon_4.stl
0.69 MiB 1 h 15 min
1 m
Download
4_body_weapon_3.stl
0.69 MiB 1 h 14 min
1 m
Download
5_body_weapon_5.stl
0.13 MiB 12 min
<1 m
Download
6_body_weapon_6.stl
0.13 MiB 12 min
<1 m
Download
7_body_weapon_1.stl
1.35 MiB 6 h 3 min
4 m
Download
8_body_weapon_2.stl
0.47 MiB 2 h 29 min
2 m
Download
9_arm_weapons_R.stl
0.66 MiB 43 min
<1 m
Download
10_arm_2_R.stl
1.96 MiB 7 h 47 min
5 m
Download
11_arm_weapons_L.stl
0.66 MiB 43 min
<1 m
Download
12_arm_2_L.stl
1.96 MiB 7 h 48 min
5 m
Download
13_arm_1_R.stl
1.81 MiB 10 h 41 min
6 m
Download
14_arm_1_L.stl
1.81 MiB 10 h 38 min
6 m
Download
15_GE_connector_C_4_R.stl
0.06 MiB 19 min
<1 m
Download
16_GE_connector_C_4_L.stl
0.06 MiB 19 min
<1 m
Download
17_Axis_2_B_claw_1.stl
0.23 MiB 15 min
<1 m
Download
18_Axis_2_B_joint_6.stl
0.71 MiB 35 min
<1 m
Download
19_Axis_2_B_joint_5.stl
0.71 MiB 35 min
<1 m
Download
20_Axis_2_B_claw_2.stl
0.23 MiB 15 min
<1 m
Download
21_leg_3_L.stl
2.40 MiB 7 h 7 min
4 m
Download
22_leg_3_R.stl
2.40 MiB 7 h 6 min
4 m
Download
23_Axis_2_B_claw_5.stl
0.23 MiB 23 min
<1 m
Download
24_Axis_2_B_claw_6.stl
0.23 MiB 22 min
<1 m
Download
25_Axis_2_B_joint_2.stl
0.71 MiB 36 min
<1 m
Download
26_Axis_2_B_joint_1.stl
0.71 MiB 36 min
<1 m
Download
27_leg_2_R.stl
1.23 MiB 10 h 22 min
6 m
Download
28_leg_2_L.stl
1.23 MiB 10 h 22 min
6 m
Download
29_GE_connector_C_2_R.stl
0.06 MiB 16 min
<1 m
Download
30_GE_connector_C_3_R.stl
0.06 MiB 16 min
<1 m
Download
31_GE_connector_C_3_L.stl
0.06 MiB 16 min
<1 m
Download
32_GE_connector_C_2_L.stl
0.06 MiB 16 min
<1 m
Download
33_leg_1_R.stl
1.61 MiB 9 h 21 min
5 m
Download
34_leg_1_L.stl
1.61 MiB 9 h 23 min
5 m
Download
35_Axis_2_B_joint_4.stl
0.71 MiB 35 min
<1 m
Download
36_Axis_2_B_claw_3.stl
0.23 MiB 15 min
<1 m
Download
37_pelvis.stl
2.70 MiB 18 h 11 min
11 m
Download
38_Axis_2_B_claw_4.stl
0.23 MiB 15 min
<1 m
Download
39_Axis_2_B_joint_3.stl
0.71 MiB 35 min
<1 m
Download
41_pelvis_armor_R.stl
0.19 MiB 53 min
<1 m
Download
42_pelvis_armor_L.stl
0.19 MiB 53 min
<1 m
Download
43_GE_connector_C.stl
0.04 MiB 14 min
<1 m
Download
1_1_head_v2 (repaired).st l
1.46 MiB 5 h 30 min
3 m
Download
1_2_anten_L_v2 (repaired) .stl
0.03 MiB 4 min
<1 m
Download
1_3_anten_R_v2 (repaired) .stl
0.04 MiB 3 min
<1 m
Download

MWO Atlas 3D model is inspired by the most powerful and feared Mech of all time. Being equipped with an Autocannon 20 and Medium Lasers, the Mech can take down any lighter Mechs in one shot. This ability makes it sought after by fans of the video game, enabling them to gain additional power and an ally in their online BattleMech Universe.  

Creating Mech Warrior Atlas 3D model STL files

The in-game 10-ton Mech has been optimized and stylized for 3D printing for all those who have dreamed having it in their collection. The 3D print model features the prototype’s looks and design, with optimization to be easily printed on any type of 3D printers.

MWO Atlas 3D model is created in Autodesk May 3D modeling software. The model is saved and converted in STL files. There are 49 separate parts which you must print and assemble together. 

All the files have passed thorough checking and correction in Netfabb. The Atlas STL files can be easily handled in any slicing program, be it CURA 15.06 or Simplify3D.

Size of Mech Warrior Atlas 3D model

After 3D printing and assembling all parts, the model will stand 250mm tall, 101mm deep, and 186mm wide. Your 3D printed Mech Warrior Atlas model will feature a rotating torso and workable hands and legs. Upgraded joints are designed and fitted into the model to ensure its operability.

Buy Mech Warrior Atlas 3D model STL files for printing by clicking the green Buy button. Proceed to checkout. Provide your PayPal or credit card details, download the files, and print them on your home printer. 

Or, print them with 3DHubs directly from our website. Check the STL files you want to print and click Print with 3DHubs button. 

On 26.12.2016 the model files have been optimized and made solid. They now are adapted to be 3D printed using any slicing program. 3D model files are already available for purchase and download.

________________________

On 31.10.2017 new scale and new version of joints have been added.

 

Now, the MWO Atlas 3D Model is available in two scale: 1/60 for Version 2 (FDM/FFF) and 1/100 for Version 3 (DLP/SLA/SLS).

There are 43 parts in Version 2 (FDM/FFF) and 8 parts for Version 3 (DLP/SLA/SLS).

Version 2 (FDM/FFF):
- Is 1:60 scale and after being printed will stand 324 mm tall, 241 mm wide, 131 mm deep;
- Made with new joints;
- All movable elements of the Mech were saved.

Version 3 (DLP/SLA/SLS):
- Is 1:100 scale and will stand 194 mm tall, 145 mm wide, 78.6 mm deep;
- Made with new joints;
- All movable elements of the Mech were saved;
- Has as few details as possible to keep printing costs down.

With new joints from Version 2 and Version 3 you will get next advantages:
1. Increases frictional force;
2. Possible to up scale or down scale the whole model;
3. Printable from any type of material;
4. Higher strength;
5. Material shrinkage does not affect at strength and friction.

STL files with new scale and new joints are already available for download in “Source files” tab for:
- Version 2 - STL files on FDM/FFF 3D printers;
- Version 3 - STL files on DLP/SLA/SLS 3D printers.

Watch the tutorial video on how to assemble Atlas MWO 3D Printing Miniature at Gambody YouTube channel

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 2.7.0. and print on an Ultimaker 2 in PLA material.

Note:

- You can print new joints from Version 2 and Version 3 with 20-30% infill. 
- With the new joints from Version 2 and Version 3 you can up scale or down scale the whole model.

To avoid printing problems, we recommend the following settings:

Quality 
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
   Top/Bottom Line Width: 0.4 mm
   Infill Line Width: 0.4 mm
   Skirt/Brim Line Width: 0.4 mm
   Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Shortest
Ignore Small Z Gaps: Check

Infill 
Infill Density: 20%

Infill Line Distance: 3.5 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill Overlap Percentage: 10%
    Infill Overlap: 0.4 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Material 
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 20 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Speed 
Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 40 mm/s
      Outer Wall Speed: 30 mm/s
      Inner Wall Speed: 40 mm/s
    Top/Bottom Speed 20 mm/s
    Support Speed: 30 mm/s
      Support Infill Speed: 30 mm/s
Travel Speed: 120 mm/s
Initial Layer Speed: 30 mm/s

    Initial Layer Print Speed: 30 mm/s
    Initial Layer Travel Speed: 72 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.6562 mm 

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.27 mm
    Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Enable Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 2.3333 mm
Support Z Distance: 0.15 mm
    Support Top Distance: 0.15 mm
    Support Bottom Distance: 0.15 mm
Support X/Y Distance: 0.8 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.2 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 15 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental 
Extra Skin Wall Count: 0

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus
Other author's 3D printings

Tags

mechwarrior, battlemech, mwo, battletech, atlas, atlas mech, 3d printing, action figure, robots, video games, 3d printing miniatures, New Joints, New Scale

Similar items

Browse more newly listed 3D printings