Make pre-order

(5)
average
cm: 39 w x 27 d x 30 h
in: 15.354 w x 10.63 d x 11.811 h
9
BUY FOR  $29.99

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Hobbiton Bonsai Pot 3D Printing Model comes in 2 versions for different 3D printer types (FFF/FDM, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament
1_tree_1_FDM(repaired).st l
22.39 MiB n.a.
n.a.
Download
2_tree_2_FDM(repaired).st l
18.14 MiB 35 h 28 min
28 m
Download
3_tree_3_FDM(repaired).st l
22.16 MiB 17 h 25 min
11 m
Download
4_tree_4_FDM(repaired).st l
21.29 MiB 12 h 55 min
8 m
Download
5_tree_5_FDM(repaired).st l
10.50 MiB 1 h 51 min
1 m
Download
6_tree_6_FDM(repaired).st l
21.37 MiB 21 h 18 min
14 m
Download
7_tree_7_FDM(repaired).st l
15.39 MiB 4 h 45 min
3 m
Download
8_tree_8_FDM(repaired).st l
14.94 MiB 6 h 13 min
4 m
Download
9_tree_9_FDM(repaired).st l
7.75 MiB 50 min
<1 m
Download
10_tree_10_FDM(repaired). stl
16.11 MiB 1 h 9 min
1 m
Download
11_tree_11_FDM(repaired). stl
8.40 MiB 39 min
<1 m
Download
12_cap_1_FDM (repaired).s tl
20.33 MiB 36 h 9 min
20 m
Download
13_cap_2_FDM (repaired).s tl
18.48 MiB 26 h 51 min
15 m
Download
14_cap_3_FDM(repaired).st l
14.33 MiB 12 h 9 min
6 m
Download
15_cap_4_FDM(repaired).st l
13.83 MiB 13 h 27 min
7 m
Download
16_pot_1_FDM(repaired).st l
18.95 MiB 26 h 37 min
16 m
Download
17_pot_2_FDM(repaired).st l
14.88 MiB 60 h 53 min
38 m
Download
18_lawn_1_FDM(repaired).s tl
21.26 MiB n.a.
n.a.
Download
19_lawn_2_FDM(repaired).s tl
21.55 MiB 42 h 45 min
23 m
Download
20_lawn_3_FDM(repaired).s tl
23.17 MiB 31 h 57 min
17 m
Download
21_wall_1_FDM(repaired).s tl
22.76 MiB 51 h 35 min
31 m
Download
22_wall_2_FDM(repaired).s tl
22.65 MiB 54 h 42 min
33 m
Download
23_wall_3_FDM(repaired).s tl
17.45 MiB 38 h 49 min
23 m
Download
24_wall_4_FDM(repaired).s tl
12.54 MiB 23 h 17 min
13 m
Download
25_wall_5_FDM(repaired).s tl
12.21 MiB 21 h 26 min
13 m
Download
26_bench_1_FDM(repaired). stl
4.86 MiB 39 min
<1 m
Download
27_bench_2_FDM(repaired). stl
4.75 MiB 39 min
<1 m
Download
28_Bilbo_Baggins_FDM(repa ired).stl
27.54 MiB 43 min
<1 m
Download
29_window_1_FDM(repaired) .stl
0.46 MiB 5 min
<1 m
Download
30_window_2_FDM(repaired) .stl
0.43 MiB 24 min
<1 m
Download
31_window_3_FDM(repaired) .stl
0.54 MiB 4 min
<1 m
Download
32_window_4_FDM(repaired) .stl
0.67 MiB 4 min
<1 m
Download
33_window_5_FDM(repaired) .stl
0.87 MiB 25 min
<1 m
Download
34_window_6_FDM(repaired) .stl
0.59 MiB 4 min
<1 m
Download
35_lattice_1_FDM(repaired ).stl
0.95 MiB 4 min
<1 m
Download
36_lattice_2_FDM(repaired ).stl
1.23 MiB 10 min
<1 m
Download
37_lattice_3_FDM(repaired ).stl
0.94 MiB 3 min
<1 m
Download
38_lattice_4_FDM(repaired ).stl
0.86 MiB 2 min
<1 m
Download
39_lattice_5_FDM(repaired ).stl
0.93 MiB 9 min
<1 m
Download
40_lattice_6_FDM(repaired ).stl
0.93 MiB 2 min
<1 m
Download
41_lantern_FDM(repaired). stl
2.91 MiB 10 min
<1 m
Download
42_doorhandle_FDM(repaire d).stl
3.95 MiB 2 min
<1 m
Download
43_ge_lock_10H(x82)_FDM(r epaired).stl
0.03 MiB 4 min
<1 m
Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
Download
Tag (repaired).stl
1.70 MiB 1 h 16 min
1 m
Download

ABOUT THIS 3D MODEL

At the end of Bagshot Row in Hobbiton, a village in the centre of the Shire, there is a cosy smial with a perfectly round green door, a shiny brass knob in the exact middle and round windows that lead to countless rooms. Just above the Hobbit-hole, there is an old huge tree overlooking “the most luxurious hobbit-hole in the local area”. And if you happen to pay a visit on the owner’s birthday, you may be welcomed by the sign “no admittance, except on party business”. While many of Tolkien’s fans have already travelled all the way to New Zealand to visit a 12-acre movie set “Hobbiton”, the author of this 3D printing model gives any willing enthusiast a chance to create a very own replica of Bilbo Baggins’ home! The 3D artist spent 240 hours to create the model of the Baggins’ Bag End that comes with a trick! You can either print the whole Bag End model including its roof with the tree mounted on top of it or you can choose the other variant without the roof to plant a real bonsai tree inside of the hobbit-hole! The model for 3D printing comes with everything you need - there is an extra 3D printing pot with holes to wire the bonsai to it. Once the bonsai is planted you can put it into the bowl that also can be 3D printed and filled with expanded clay to aggregate for drainage and aeration. Your bonsai project is ready to be fixed into the hobbit-hole! Both bowl and pot can be taken out any time you need to replant the tree or when you want to rotate the pot given that the bonsai grows in the direction of the light. We are sure any LOTR fans would be stunned to have such a unique flowerpot at home! By the way, have you noticed Bilbo Baggins sitting on the bench?

ADAPTATION FOR 3D PRINTING

Hobbiton Bonsai Pot for 3D printing is an assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 42 hours in total. The model’s cutting was chosen to ensure the cleanest 3D printed result, e.g. window-frames, benches, doorknob, lamp and even Bilbo Baggins’ figurines are available as separate assembly parts. Besides, the model’s windows are provided as separate files for you to be able to print them in transparent filament and add LEDs inside to light the Hobbit-hole up in the evenings. When choosing the tree for your 3D printed pot it is recommended that you take the following general rules into account: the pot’s depth should be equal to the diameter of the trunk just above soil level. For oval pots, the length of the pot should be 2/3 the height of the tree. The author of the model wants to emphasise that it is important to buy bonsai first and then figure out what scale to print the Bag End at.

The author of the Bonsai Pot model prepared a set of video instructions on how to assemble and paint the model and even on how to plant the tree inside.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 43 parts;
- A printed model is 300 mm tall, 390 mm wide, 270 mm deep;
- Assembly kit includes lock 43_ge_lock_10H(x82)​ to connect parts securely without glue that needs to be printed 82 times;
- Comes with a bowl and a pot for you to plant your own bonsai tree;
- Windows are provided separately to print them in transparent filament:
- Can be assembled with the roof and a tree on it if you don't want to plant the bonsai;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA/SLS 1.0 version features:
- Contains 6 parts for those who have 3D printers with large build plates to print with fewer assembly parts;
- A printed model is 300 mm tall, 390 mm wide, 270 mm deep;
- Comes with a bowl and a pot for you to plant your own bonsai tree;
- Can be assembled with the roof and a tree on it if you don't want to plant the bonsai;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Hobbiton Bonsai Pot model for 3D printing which consist of 49 parts;
- 2 versions of files for this model for FFF/FDM, DLP/SLA/SLS printers;
- High-poly detailed model of Hobbiton Bonsai Pot;
- Detailed settings that we provide as a recommendation for Cura 3.5.1, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the model of Hobbiton Bonsai Pot for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Hobbiton Bonsai Pot 3D Printing Model at Gambody YouTube channel.

Also, you may like the other LOTR 3D Printing Models.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.4.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell
Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill
Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material
Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s

Speed 
Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 3 mm
Support Z Distance: 0.1 mm
    Support Top Distance: 0.1 mm
    Support Bottom Distance: 0.1 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus
Other author's 3D printings

Tags

bilbo baggins, bag end, hobbiton, the lord of the rings, pot, hobbit, tolkien, LOTR, assembly

Similar items

Browse more newly listed 3D printings