Premium Stock

UD-4L Cheyenne Dropship 3D Printing Model | Assembly

(18)
cm: 21.5 w x 41.9 d x 11.5 h
in: 8.465 w x 16.496 d x 4.528 h

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • STL files of UD-4L Cheyenne Dropship 3D Model for 3D printing which consist of 133 parts;
  • 3 versions of files for this model for FFF/FDM, DLP/SLA/SLS;
  • High-poly detailed model of UD-4L Cheyenne Dropship;
  • Detailed settings that we provide for Cura , Simplify3D and Slic3r for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_nose_FDM (repaired).stl
10.69 MiB 41 min <1 m 22 x 21 x 35 Download
3_nose_cap_FDM (repaired) .stl
0.15 MiB 6 min <1 m 13 x 13 x 3 Download
4_cockpit_1_FDM (repaired ).stl
0.36 MiB 22 min <1 m 13 x 35 x 8 Download
5_cockpit_2_FDM (repaired ).stl
6.55 MiB 1 h 11 min <1 m 13 x 37 x 28 Download
6_cabine_cap_1_FDM (repai red).stl
0.39 MiB 1 h <1 m 19 x 16 x 46 Download
7_cabine_cap_2_FDM (repai red).stl
0.44 MiB 42 min <1 m 19 x 46 x 16 Download
8_wind_1_R_FDM (repaired) .stl
0.04 MiB 4 min <1 m 12 x 17 x 1 Download
9_wind_2_L_FDM (repaired) .stl
0.02 MiB 2 min <1 m 14 x 15 x 1 Download
10_wind_1_L_FDM (repaired ).stl
0.04 MiB 4 min <1 m 12 x 17 x 1 Download
11_wind_2_R_FDM (repaired ).stl
0.02 MiB 2 min <1 m 14 x 15 x 1 Download
12_wind_1_mid_FDM (repair ed).stl
0.05 MiB 10 min <1 m 10 x 19 x 12 Download
13_wind_2_mid_FDM (repair ed).stl
0.01 MiB 4 min <1 m 12 x 19 x 1 Download
14_front_cap_1_FDM (repai red).stl
5.23 MiB 22 min <1 m 21 x 14 x 24 Download
15_front_cap_2_FDM (repai red).stl
5.23 MiB 23 min <1 m 21 x 14 x 24 Download
16_wing_front_R_FDM (repa ired).stl
18.19 MiB 3 h 47 min 2 m 31 x 32 x 44 Download
17_wing_front_L_FDM (repa ired).stl
18.19 MiB 3 h 47 min 2 m 31 x 32 x 44 Download
18_hull_mid_FDM (repaired ).stl
14.67 MiB 16 h 41 min 11 m 72 x 53 x 89 Download
19_wing_mount_mid_1_FDM ( repaired).stl
0.94 MiB 24 min <1 m 12 x 22 x 16 Download
20_wing_mount_mid_2_FDM ( repaired).stl
0.94 MiB 24 min <1 m 12 x 22 x 16 Download
21_wing_mid_1_R_FDM (repa ired).stl
5.17 MiB 1 h 46 min 1 m 9 x 55 x 82 Download
22_wing_mid_2_R_FDM (repa ired).stl
6.09 MiB 5 h 26 min 4 m 30 x 52 x 52 Download
23_wing_mid_3_R_FDM (repa ired).stl
2.06 MiB 2 h 52 min 1 m 23 x 52 x 22 Download
24_wing_mid_4_R_FDM (repa ired).stl
0.43 MiB 4 min <1 m 12 x 9 x 2 Download
25_wing_mid_1_L_FDM (repa ired).stl
5.07 MiB 1 h 46 min 1 m 9 x 55 x 82 Download
26_wing_mid_2_L_FDM (repa ired).stl
6.07 MiB 5 h 23 min 4 m 30 x 52 x 52 Download
27_wing_mid_3_L_FDM (repa ired).stl
2.06 MiB 2 h 52 min 1 m 23 x 52 x 22 Download
28_wing_mid_4_L_FDM (repa ired).stl
0.42 MiB 4 min <1 m 12 x 9 x 2 Download
29_hull_3_FDM (repaired). stl
6.66 MiB 11 h 35 min 7 m 65 x 44 x 116 Download
30_ld_right_1_FDM (repair ed).stl
2.90 MiB 18 min <1 m 11 x 41 x 4 Download
31_ld_right_2_FDM (repair ed).stl
0.12 MiB 5 min <1 m 10 x 17 x 2 Download
32_ld_right_3_FDM (repair ed).stl
1.22 MiB 1 h 32 min 1 m 17 x 55 x 43 Download
33_ld_left_1_FDM (repaire d).stl
2.90 MiB 18 min <1 m 11 x 41 x 4 Download
34_ld_left_2_FDM (repaire d).stl
0.12 MiB 5 min <1 m 10 x 18 x 2 Download
35_ld_left_3_FDM (repaire d).stl
1.22 MiB 1 h 30 min 1 m 17 x 55 x 43 Download
36_ld_back_1_FDM (repaire d).stl
2.60 MiB 5 h 53 min 3 m 51 x 90 x 65 Download
37_ld_back_2_FDM (repaire d).stl
17.46 MiB 2 h 23 min 1 m 37 x 80 x 14 Download
38_ld_cap_right_FDM (repa ired).stl
0.01 MiB 17 min <1 m 11 x 41 x 4 Download
39_ld_cap_left_FDM (repai red).stl
0.01 MiB 17 min <1 m 11 x 41 x 4 Download
40_ld_cap_back_FDM (repai red).stl
4.76 MiB 2 h 17 min 1 m 37 x 80 x 14 Download
41_trap_FDM (repaired).st l
0.39 MiB 5 h 3 min 2 m 67 x 130 x 5 Download
42_exhaust_mid_x4_FDM (re paired).stl
2.12 MiB 11 min <1 m 15 x 15 x 9 Download
43_hull_top_FDM (repaired ).stl
33.39 MiB 16 h 57 min 9 m 102 x 187 x 22 Download
44_exhaust_top_1_FDM (rep aired).stl
2.19 MiB 14 min <1 m 17 x 17 x 8 Download
45_exhaust_top_2_FDM (rep aired).stl
2.19 MiB 14 min <1 m 17 x 17 x 8 Download
46_hull_top_cap_1_FDM (re paired).stl
2.07 MiB 12 min <1 m 5 x 12 x 23 Download
47_hull_top_cap_2_FDM (re paired).stl
2.07 MiB 12 min <1 m 5 x 12 x 23 Download
48_wing_back_mid_1_FDM (r epaired).stl
5.73 MiB 5 h 13 min 3 m 98 x 7 x 133 Download
49_wing_back_mid_R_FDM (r epaired).stl
2.98 MiB 1 h 33 min 1 m 25 x 49 x 62 Download
50_wing_back_mid_L_FDM (r epaired).stl
2.98 MiB 1 h 31 min 1 m 25 x 49 x 62 Download
51_wing_top_1_R_FDM (repa ired).stl
13.88 MiB 55 min 1 m 4 x 70 x 52 Download
52_wing_top_1_L_FDM (repa ired).stl
13.88 MiB 55 min 1 m 4 x 70 x 52 Download
53_Ge_lock_10H_x18_FDM (r epaired).stl
0.03 MiB 4 min <1 m 10 x 18 x 2 Download
2_hull_front_FDM_no water mark (repaired).stl
37.50 MiB 29 h 47 min 19 m 161 x 57 x 109 Download
6_cabine_cap_1_FDM_no wat ermark (repaired).stl
0.29 MiB 60 min <1 m 19 x 16 x 46 Download
7_cabine_cap_2_FDM_no wat ermark (repaired).stl
0.35 MiB 1 h 3 min <1 m 19 x 16 x 46 Download
18_hull_mid_FDM_no waterm ark (repaired).stl
14.63 MiB 16 h 38 min 11 m 71 x 53 x 89 Download
31_ld_right_2_FDM_no wate rmark (repaired).stl
0.03 MiB 5 min <1 m 10 x 17 x 2 Download
34_ld_left_2_FDM_no water mark (repaired).stl
0.03 MiB 5 min <1 m 10 x 18 x 2 Download
43_hull_top_FDM_no waterm ark (repaired).stl
45.76 MiB 16 h 51 min 9 m 102 x 187 x 22 Download
2_hull_front_FDM (repaire d).stl
22.18 MiB 31 h 26 min 19 m 161 x 57 x 109 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min 1 m Download
2_hull_front_and_nose_FDM (repaired).stl
45.58 MiB 32 h 11 min 19 m 161 x 57 x 135 Download
...

HISTORY OF UD-4L

The UD-4L Cheyenne Dropship is a versatile landing combat spacecraft from the ‘Alien’ movie series primarily used during the United States Colonial Marine Corps operations. It entered into service at the end of the Tientsin conflict when an all-purpose light aerospace shuttle with huge carrying capacity was requested. The Dropship is capable of delivering troops and equipment to unprepared sites, relying on its impressive power and its ability to take off vertically. The spacecraft is also equipped with powerful weapons bays that fold out on extended pylons so that UD-4L can also be used as a gunship during attacks.

ABOUT THIS 3D MODEL

The model is saved in STL files, a format supported by most 3D printers

FFF/FDM 1.1 version features:

  • Contains 66 parts;
  • A printed model is 115 mm tall, 215 mm wide, 419 mm deep;
  • New, upgraded design;
  • Highly-detailed cockpit interior;
  • Alternative cockpit design - solid and with cutouts for windows;
  • Upgraded missile modules;
  • The landing module opens;
  • Movable front wings;
  • You can either mount the model on a chassis or use the caps;
  • Tunnels for LED wiring to light up the cockpit.

FFF/FDM 1.0 version features:

  • Contains 53 parts;
  • Assembly kit includes locks. One part of  Lock (53_Ge_lock_10H_x18) needs to be printed 18 times;
  • Two variants of cockpit - a solid one and a cockpit with insertable glass designed to be printed with transparent filament;
  • High-poly cockpit;
  • Folding front wings with rockets;
  • Folding central wings with powerful weapon bays;
  • Opening cargo door to deliver the M113 armoured personnel carrier;
  • Landing gear to display the dropship standing;
  • Covers to replace the landing gear to depict the dropship in-flight;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA/SLS 1.0 version features:

  • Same as FFF/FDM but smaller, also made as 14 parts;
  • Has few details, to keep printing costs down.

All STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for CuraSimplify3D or Slic3r Software.

Scale: UD-4L actual length is 25180 mm. The model’s chosen scale is 1/60 for the FDM version and 1/100 for the DLP/SL/SLS versions.

FFF/FDM version dimensions:

  • A printed model with wings is 136 mm tall, 276 mm wide, 420 mm deep;
  • A printed model without wings is 95 mm tall, 197 mm wide, 420 mm deep.

DLP/SLA/SLS version dimensions:

  • A printed model with wings is 82 mm tall, 166 mm wide, 252 mm deep;
  • A printed model with fully unfolded wings is 81 mm tall, 131 mm wide, 251 mm deep;
  • A printed model without wings is 57 mm tall, 118 mm wide, 252 mm deep.

You can get Model of UD-4L Cheyenne Dropship for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble UD-4L Cheyenne Dropship 3D Printing Model at Gambody YouTube channel.

Also, you may like other Space Ships 3D Printing Models as well as other Alien vs Predator 3D Printing Figurines.

_______

FAQ: 

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.5. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.8.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings