Community (fb) 
es 
ua 
Files
3D model format
Stereolithography (.stl)
Total files
Slicer settings
Mesh error check
not specified
Support
Lifetime support from Gambody team
Update requests
not specified
Model versions
DLP/SLA
Eco parts
Assembly method
Connectors
Features
The STL files that this version comprises are pre-supported, hollowed out, and have drain holes where needed. You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate. The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots;
DLP/SLA
Eco parts
Assembly method
Connectors
Features
2 variants of the wings to assemble either Viserion or Ice Dragon;
The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots;
SLS
Assembly method
Connectors
Features
Contain 3 parts: 3D printer files of Viserion, Ice Dragon, and a separate platform. The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots;
FFF/FDM
Assembly method
Connectors
Features
2 variants of the wings to assemble either Viserion or Ice Dragon. The claw (40_wing_claws_2(x10)_FDM) needs to be printed 10 times. Wings are available in 4 pieces or in 6 pieces for smaller print-beds. The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots;
DLP/SLA
Eco parts
Assembly method
Connectors
Features
Contains some hollowed out parts to save resin;
The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots;
Additional details
Part of diorama
No
Special pack included
No
You can get the STL files of Viserion Ice Dragon for 3D printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model's page. You can pay with PayPal or your credit card.
Watch the tutorial on how to assemble the 3D printed Viserion Ice Dragon model from the provided 3D print files on Gambody YouTube channel.
Also, you may like other Game of Thrones 3D printer designs.
_______
FAQ:
This 3D model comes with StereoLithography (.STL) files optimized for 3D printing. You'll get digital files, not a physical product
Before printing, take a look at Printing Details for recommended settings and tips to achieve better results.
Viserion Ice Dragon 3D Printer Files | Assembly includes 3 version(s) for the supported 3D printer type(s): DLP/SLA, SLS, FFF/FDM. Files are available for download after purchase.
See the Description and Specifications sections for more details about this model.
| File name | Size (mm | in) | Size(mb) | Printing Time / Resin | |||
|---|---|---|---|---|---|---|
 | 1_head_presupported_SLA(repaired).stl 37.66 x 63.14 x 39.65 mm | 1.48 x 2.49 x 1.56 in | Size: 37.66 x 63.14 x 39.65 mm | 1.48 x 2.49 x 1.56 in | File size: 48.79 mb | Printing Time / Resin: — / — | ||
 | 2_body_presupported_SLA(repaired).stl 36.36 x 44.94 x 37.34 mm | 1.43 x 1.77 x 1.47 in | Size: 36.36 x 44.94 x 37.34 mm | 1.43 x 1.77 x 1.47 in | File size: 40.38 mb | Printing Time / Resin: — / — | ||
 | 3_leg_L_presupported_SLA(repaired).stl 36.26 x 24.96 x 31.57 mm | 1.43 x 0.98 x 1.24 in | Size: 36.26 x 24.96 x 31.57 mm | 1.43 x 0.98 x 1.24 in | File size: 33.24 mb | Printing Time / Resin: — / — | ||
 | 4_leg_R_presupported_SLA(repaired).stl 32.23 x 25.7 x 39.51 mm | 1.27 x 1.01 x 1.56 in | Size: 32.23 x 25.7 x 39.51 mm | 1.27 x 1.01 x 1.56 in | File size: 33.29 mb | Printing Time / Resin: — / — | ||
 | 5_tail_1_presupported_SLA(repaired).stl 61.89 x 38.55 x 57.54 mm | 2.44 x 1.52 x 2.27 in | Size: 61.89 x 38.55 x 57.54 mm | 2.44 x 1.52 x 2.27 in | File size: 53.72 mb | Printing Time / Resin: — / — | ||
 | 6_tail_presupported_2_SLA(repaired).stl 39.93 x 53.14 x 50.82 mm | 1.57 x 2.09 x 2 in | Size: 39.93 x 53.14 x 50.82 mm | 1.57 x 2.09 x 2 in | File size: 46.19 mb | Printing Time / Resin: — / — | ||
 | 7_wing_undead_R_presupported_SLA(repaired).stl 49.62 x 151.47 x 117.38 mm | 1.95 x 5.96 x 4.62 in | Size: 49.62 x 151.47 x 117.38 mm | 1.95 x 5.96 x 4.62 in | File size: 82.79 mb | Printing Time / Resin: — / — | ||
 | 8_wing_undead_L_presupported_SLA(repaired).stl 76.8 x 140.87 x 119.22 mm | 3.02 x 5.55 x 4.69 in | Size: 76.8 x 140.87 x 119.22 mm | 3.02 x 5.55 x 4.69 in | File size: 57.20 mb | Printing Time / Resin: — / — | ||
 | 9_wing_R_presupported_SLA(repaired).stl 81.83 x 144.52 x 108.5 mm | 3.22 x 5.69 x 4.27 in | Size: 81.83 x 144.52 x 108.5 mm | 3.22 x 5.69 x 4.27 in | File size: 73.63 mb | Printing Time / Resin: — / — | ||
 | 10_wing_L_presupported_SLA(repaired).stl 85.49 x 139.5 x 113.01 mm | 3.37 x 5.49 x 4.45 in | Size: 85.49 x 139.5 x 113.01 mm | 3.37 x 5.49 x 4.45 in | File size: 55.68 mb | Printing Time / Resin: — / — | ||
 | 11_platform_presupported_SLA(repaired).stl 63.66 x 81.18 x 58.15 mm | 2.51 x 3.2 x 2.29 in | Size: 63.66 x 81.18 x 58.15 mm | 2.51 x 3.2 x 2.29 in | File size: 81.47 mb | Printing Time / Resin: — / — | ||
3D model history
Viserion is one of the three dragons born to Daenerys of the House Targaryen and named after Khaleesi's deceased elder brother. The choice of the name Mother of Dragons is explained as her child's destiny to do what her cruel and weak brother couldn't. And as expected, just as his two brothers, Viserion was Daenerys' faithful protector and loyal companion until the fateful events from Beyond the Wall. With the single intention to get hold of the proof that the White Walkers are not a legend but a very terrifying reality, Jon Snow and fellow volunteers set off for what seems to be a suicide mission. Being surrounded by the innumerable Army of the Dead, Khaleesi and her two dragons were the only aid the could hope for. And what seemed to be a victorious escape resulted in Viserion being struck with an ice spear thrown by the Night King. Upon the King's touch dragon's eyes and flames turn glowing-blue—Viserion is resurrected becoming an Ice Dragon.
3D printing model features
Model-specific features:
- Made with 2 variants of wings to assemble either Viserion or Ice Dragon;
- Special platform stylized as a part of a mountain;
- Can be combined with the Night King and Wight Horse 3D models into diorama.
Printing & assembly details:
- Provided as error-free STL files compatible with most 3D printers;
- Optimized part division minimizes support material and ensures smooth surface detail;
- The assembly parts in the FFF/FDM version come in the recommended print orientations for easy bed placement;
- Hollowed-out parts in the DLP/SLA Eco version of the model to save resin;
- Pre-supported parts in the DLP/SLA Pre-Supported version, with the parts also being hollowed out and have the drain holes. When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact;
- Assembly manual in video format is included for both FFF/FDM and DLP/SLA versions;
- The model is available in recommended scales of 1:50 for the FFF/FDM versions and 1:100 for the DLP/SLA/SLS versions, based on the actual height of Viserion Ice Dragon, which is 4000 mm.
What will you get after purchase?
- 5 versions of Viserion Ice Dragon STL files for FFF/FDM, DLP/SLA, DLP/SLA Eco, DLP/SLA Pre-supported, and SLS — files for all versions are available for download after the purchase;
- STL files of high-poly Viserion Ice Dragon model for 3D printing consist of 84 files;
- Sizes for:
- FFF/FDM: 582 mm wide, 354 mm high, 188 mm deep;
- DLP/SLA/SLS: 291 mm wide, 177 mm high, 94 mm deep;
- Assembly Manual for FFF/FDM 1.0 and SLS 1.0 versions in video format;
- Detailed settings that we provide as a recommendation for Bambu Studio, Cura, Orca Slicer, PrusaSlicer, Simplify3D, and Slic3r for the best print;
- Full technical support from the Gambody Support Team.
Average customer rating (63 reviews)
4.6
Ratings breakdown
Click a star rating to filter reviews
Overall experience
Level of detail in the model
4.6
Model cut quality and assembly guide
4.6
Clarity and accuracy of the model page
4.6
Verified purchase Level of detail in the model
5
Model cut quality and assembly guide
3.5
Clarity and accuracy of the model page
5
Verified purchase Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Verified purchase Level of detail in the model
1
Model cut quality and assembly guide
1
Clarity and accuracy of the model page
1
Verified purchase Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Verified purchase Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Verified purchase Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
This feedback is from a user who hasn't purchased this model Level of detail in the model
3
Model cut quality and assembly guide
3
Clarity and accuracy of the model page
3
Verified purchase Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Verified purchase Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Verified purchase Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
This feedback is from a user who hasn't purchased this model Level of detail in the model
4
Model cut quality and assembly guide
4
Clarity and accuracy of the model page
4
This feedback is from a user who hasn't purchased this model Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Verified purchase Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
This feedback is from a user who hasn't purchased this model Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
This feedback is from a user who hasn't purchased this model Level of detail in the model
1
Model cut quality and assembly guide
1
Clarity and accuracy of the model page
1
Verified purchase Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
This feedback is from a user who hasn't purchased this model Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
This feedback is from a user who hasn't purchased this model Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
This feedback is from a user who hasn't purchased this model Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
This feedback is from a user who hasn't purchased this model Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Below you'll find detailed slicing settings for Bambu Studio 2.0+, Orca Slicer 2.0+, UltiMaker Cura 5.0+, PrusaSlicer 2.0+, Slic3r 1.3+, Simplify3D 5.0+ to help you get the best results when printing this model. These settings are optimized specifically for this 3D model, but please note they may need slight adjustments depending on your printer or filament. When in doubt, refer to your printer's user manual.
To avoid printing issues and achieve the best quality, we highly recommend applying the following settings:
Bambu Studio 2.0+ For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
120-150% of your Layer Height
But you can paint the seam if you want.
You have to calibrate this parameter
You have to calibrate this parameter
You have to calibrate this parameter
For pins and power elements of the structure, such as the vehicle frame, use 3 loop
Disabled for vehicles and enabled for characters
For 0,2 Layer Height
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v2, you can select the maximum recommended values
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise
Enable this parameter if your model requires supports
We also recommend placing and removing supports manually in some places using special button
1-2 loops for more thick support
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Bottom Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
You have to calibrate this parameter which one is better for your filament
Increase this parameter if the supports are hard to remove from walls
For PLA and PETG filament types
5-8 mm is optional for small prints that have bad adhesion to the build plate
You have to calibrate this parameter
Read the description on your filament roll
Read the description on your filament roll and increase this parameter for fast printers
Read the description on your filament roll and increase this parameter for fast printers
Orca Slicer 2.0+ For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
120-150% of your Layer Height
But you can paint the seam if you want.
0.01-0.05 You have to calibrate this parameter
0.01-0.05 You have to calibrate this parameter
0.1-0.2 You have to calibrate this parameter
For pins and power elements of the structure, such as the vehicle frame, use 3 loop
Disabled for vehicles and ships, enabled for characters
For 0,2 Layer Height
For 0,2 Layer Height
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example, Anycubic Kobra 3 Or Bambulab A1, you can select the maximum recommended values.
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise
Enable this parameter if your model requires supports
We also recommend placing and removing supports manually in some places using special button
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Bottom Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Increase this parameter if the supports are hard to remove from walls
For PLA and PETG filament types
5-8 mm is optional for small prints that have bad adhesion to the build plate
Read the description on your filament roll
Read the description on your filament roll and increase this parameter for fast printers
You have to calibrate this parameter
Read the description on your filament roll and increase this parameter for fast printers
Read the description on your filament roll
This field is filled in according to your printer specifications when you add it to the slicer.
You can add custom G-code here for the start and end of the print. However, be careful - this is for advanced users only!
You have to calibrate your printer using Ge retraction test models
Retraction Length: For direct-drive setups use 0.5 mm to 2.5 mm; for Bowden extruders use 5 to 7 mm
This is how fast the filament is pulled back—40-60 mm/s for direct drive and 30-50 mm/s for Bowden setups.
You have to calibrate this parameter: Reduce it until the printer starts to hit the parts with the nozzle during printing, then increase it by 0.2.
UltiMaker Cura 5.0+ For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
120-150% of your Layer Height
To increase the strength of the print parts, use wall line count: 3
For pins and connectors use 50% Infill
These parameters are for standard PLA plastic. If you are using a different type of plastic, check the printing temperature recommended by the manufacturer. Also, read the description on your filament spool. For fast printers, add +30 °C to the current parameters.
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v3, you can select the maximum recommended values
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise.
You need to calibrate this parameter using Gambody test models. These values are average values for a Direct Drive extruder; for a Bowden extruder, the values should be increased.
You need to calibrate this parameter using Gambody test models. These values are average values for a Direct Drive extruder; for a Bowden extruder, the values should be increased.
Use this value other than 0 if your nozzle catches on the internal infill during travel moves. Try to keep this value as low as possible in height.
Use normal supports to support large, straight surfaces (most mechanical or technical parts).
You have to calibrate this parameter according to the capabilities of your printer and your filament, using a Gambody test models.
Use 1 instead of 0 if your supports are thin and tall. They will be harder to remove, but much stronger.
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Increase this parameter if the supports are hard to remove from walls
Use tree supports to support complex objects, such as characters.
You have to calibrate this parameter according to the capabilities of your printer and your filament, using a Gambody test models.
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Increase this parameter if the supports are hard to remove from walls
Use a skirt for all parts when printing on outdated printers.
Use a brim when printing thin but tall parts, as well as parts with a small bed adhesion area.
PrusaSlicer 2.0+ For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
120-150% of your Layer Height
for 0.2 Layer Height
But you can paint the seam if you want.
(for PLA and PETG)
(5-8 mm is optional for small prints that have bad adhesion to the build plate)
Enable this parameter if your model requires supports
(45-50 degree)You have to calibrate this parameter according to the capabilities of your printer
and your filament, using a Gambody test models.
Top contact Z distance = 1-1.3 layer Height. If the supports are hard to remove, try
increasing this setting by 0.1-0,4 mm
Top contact Z distance = 1-1.3 layer Height. If the supports are hard to remove, try
increasing this setting by 0.1-0,4 mm
Increase this parameter if the supports are hard to remove from walls
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v3, you can select the maximum recommended values
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise. Use the minimum value for outdated printers without acceleration calibration, and the maximum value for modern printers if you need it.
These settings only work for 3D printers with multiple extruders
You can try setting all parameters in this section, except the First layer, to values between 0.75% of your nozzle diameter and 1.25% of your nozzle diameter. Adjusting them will help you work out the optimal parameters for the best quality for your print. As for the First layer, you can set it to 150% of the diameter of your nozzle for better adhesion to the build plate (for a nozzle with a diameter of 0.4 mm, the First layer extrusion width can be from 0.3 mm to 0.5 mm)
For better printing quality you have to calibrate this parameter using Gambody test model.
Check your filament manufacturer's temperature recommendations on the spool.
Cooling parameters depends on the material you use for printing.
*for PLA
Slic3r 1.3+ For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
120-150% of your Layer Height
For 0.12 Layer Height
For 0.12 Layer Height
For pins and connectors use 50% Infill
Use skirt for outdated 3d printers
(5-8 mm is optional for small prints that have bad adhesion to the build plate)
Enable this parameter if your model requires supports
(45-60 degree)You have to calibrate this parameter according to the capabilities of your printer and your filament, using a Gambody test models
Contact Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v3, you can select the maximum recommended values
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise. Use the minimum value for outdated printers without acceleration calibration, and the maximum value for modern printers if you need it.
You have to calibrate this parameter from 0.9 to 1.1 according to the capabilities of your printer and your filament, using a Gambody test models.
Check your filament manufacturer's temperature recommendations on the spool.
Cooling parameters depends on the material you use for printing.
Calibrate this value if you need to reduce or improve the adhesion between the plastic and the heat bed
Your current nozzle diameter
You need to calibrate this parameter using Gambody test models. These values are average values for a Direct Drive extruder; for a Bowden extruder, the values should be increased.
Simplify3D 5.0+ Your current nozzle diameter
You have to calibrate this parameter using Gambody test models.
You need to calibrate this parameter using Gambody test models. These values are average values for a Direct Drive extruder; for a Bowden extruder, the values should be increased.
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
For 0,2 Layer Height
For 0,2 Layer Height
To increase the strength of the print parts, use Outline Perimeters: 3
You can enable this parameter to print rounded or spherical models, as well as character models.
Use this option only if your parts are too tight. but better calibrate your printer extrusion
Use this option only if your parts are too tight. but better calibrate your printer extrusion
Use 2 and more if you want to create skirt instead brim
1-2 for skirt and 10-20 for brim
Use for wipe nozzle if you need
Use For ABS filament
For pins and connectors use 50% Infill
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Calibrate your filament and detect optimal temperature for it
Average temperature for PLA filament
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v3, you can select the maximum recommended values
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise.
DLP/SLA
The STL files that this version comprises are pre-supported, hollowed out, and have drain holes where needed. You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate. The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots;
FFF/FDM
2 variants of the wings to assemble either Viserion or Ice Dragon. The claw (40_wing_claws_2(x10)_FDM) needs to be printed 10 times. Wings are available in 4 pieces or in 6 pieces for smaller print-beds. The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots;
DLP/SLA
Contains some hollowed out parts to save resin;
The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots;
SLS
Contain 3 parts: 3D printer files of Viserion, Ice Dragon, and a separate platform. The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots;
DLP/SLA
2 variants of the wings to assemble either Viserion or Ice Dragon;
The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots;
