Scout Trooper 3D Printing Figurine | Assembly

ABOUT THIS 3D MODEL

Scout Troopers, also known as Biker Scouts, are specialized reconnaissance soldiers from the Star Wars universe, first appearing in "Return of the Jedi." These Imperial troops are equipped with streamlined, lightweight armour tailored for mobility, crucial for missions on speeder bikes through challenging terrains. Their helmets feature enhanced visors with navigation and tracking sensors, making them exceptional trackers and pathfinders.

The 3D printing figure of a Scout Trooper captures the dynamic essence and detailed aesthetics of these forest assault soldiers. The figure is positioned in a dynamic pose, with every crease and detail of the iconic white armour meticulously recreated. This 3D printing representation not only highlights the advanced technology of the Galactic Empire but also evokes the intrigue and mystery of the diverse environments within the galaxy.

ADAPTATION FOR 3D PRINTING

Scout Trooper for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 62 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the commander to be depicted harmoniously in the intended pose.

The figurine’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, the soldier was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and "Assembly Manual" before getting down to Scout Trooper.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The figurine’s scale was calculated from the height of the Scout Trooper. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 versions features:

• Contains 28 parts;
• A printed figurine is 250 mm tall, 156 mm wide, 135 mm deep;
• All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 versions features:

• Contains 23 parts;
• A printed figurine is 125 mm tall, 78 mm wide, 68 mm deep;
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 versions features:

• Contains 23 parts;
• A printed figurine is 125 mm tall, 78 mm wide, 68 mm deep;
• Some parts are manually hollowed out to save resin.

SLS 1.0 versions features:

• A printed figurine is 125 mm tall, 78 mm wide, 68 mm deep;
• Contains 3 parts - a solid Scout Trooper figurine on and separately from the stand.

You can get the figurine of Scout Trooper for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble the Scout Trooper 3D Printing Figurine on Gambody YouTube channel.

Also, you may like Clone Trooper 3D Printing Figurines, Lord Darth Vader 3D Printing Figurine and other Star Wars 3D Printing Models.

_______

FAQ: 

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning? 
• How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download