Inarius 3D Printing Figurine | Assembly

(3)
cm: 42.9 w x 32.6 d x 47 h
in: 16.89 w x 12.835 d x 18.504 h

Source Files

|

Description

|

Printing Details

This 3D model of Inarius consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 4 versions of Inarius STL files for FFF/FDM, DLP/SLA, DLP/SLA Eco, SLS - files for all versions are available for download after the purchase;
  • STL files of high-poly Inarius Figurine for 3D printing consist of 103 files;
  • Sizes for:
  • FFF/FDM: 470 mm tall, 429 mm wide, 326 mm deep;
  • DLP/SLA/SLS: 235 mm tall, 214 mm wide, 163 mm deep;
  • Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
  • Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
23.68 MiB 3 h 14 min 2 m 35 x 40 x 41 Download
2_body_FDM(repaired).stl
40.31 MiB 10 h 24 min 6 m 62 x 50 x 70 Download
3_legs_FDM(repaired).stl
24.80 MiB 7 h 10 min 4 m 48 x 45 x 81 Download
4_arm_R_FDM(repaired).stl
32.07 MiB 3 h 26 min 2 m 49 x 31 x 59 Download
5_hand_R_FDM(repaired).st l
20.04 MiB 1 h 21 min 1 m 19 x 23 x 31 Download
6_arm_L_FDM(repaired).stl
31.89 MiB 3 h 46 min 2 m 45 x 39 x 56 Download
7_hand_L_FDM(repaired).st l
17.95 MiB 1 h 9 min <1 m 22 x 22 x 33 Download
8_foot_R_FDM(repaired).st l
20.51 MiB 2 h 36 min 1 m 21 x 54 x 88 Download
9_foot_L_FDM(repaired).st l
20.22 MiB 3 h 19 min 2 m 21 x 75 x 72 Download
10_scapular_R_FDM(repaire d).stl
19.05 MiB 3 h 47 min 2 m 44 x 46 x 33 Download
11_scapular_1_L_FDM(repai red).stl
19.30 MiB 3 h 21 min 2 m 46 x 46 x 38 Download
12_scapular_2_L_FDM(repai red).stl
11.56 MiB 25 min <1 m 21 x 21 x 9 Download
13_armor_front_FDM(repair ed).stl
24.41 MiB 3 h 17 min 2 m 28 x 125 x 17 Download
14_armor_rear_FDM(repaire d).stl
23.03 MiB 18 h 45 min 13 m 156 x 160 x 31 Download
15_armor_right_FDM(repair ed).stl
17.70 MiB 4 h 8 min 3 m 71 x 47 x 44 Download
16_armor_left_FDM(repaire d).stl
17.32 MiB 3 h 22 min 2 m 75 x 45 x 28 Download
17_sword_1_FDM(repaired). stl
12.98 MiB 1 h 3 min <1 m 25 x 10 x 80 Download
18_sword_2_FDM(repaired). stl
11.18 MiB 1 h 47 min 1 m 32 x 123 x 54 Download
19_sword_3_FDM(repaired). stl
11.81 MiB 2 h 23 min 2 m 11 x 144 x 57 Download
20_energy_1_FDM(repaired) .stl
23.59 MiB 38 h 53 min 26 m 159 x 129 x 96 Download
21_energy_2_FDM(repaired) .stl
19.96 MiB 5 h 48 min 2 m 82 x 33 x 169 Download
22_energy_3_FDM (repaired ).stl
16.99 MiB 9 h 52 min 6 m 41 x 111 x 142 Download
23_energy_4_FDM(repaired) .stl
12.04 MiB 1 h 44 min 1 m 46 x 46 x 104 Download
24_energy_5_FDM(repaired) .stl
22.61 MiB 6 h 15 min 3 m 62 x 52 x 110 Download
25_energy_6_FDM(repaired) .stl
15.31 MiB 2 h 10 min 1 m 20 x 26 x 116 Download
26_energy_7_FDM(repaired) .stl
12.40 MiB 3 h 48 min 1 m 80 x 25 x 132 Download
27_energy_8_FDM(repaired) .stl
2.61 MiB 2 h 3 min 1 m 75 x 20 x 128 Download
28_energy_9_FDM(repaired) .stl
14.24 MiB 2 h 44 min 1 m 69 x 41 x 91 Download
29_energy_10_FDM(repaired ).stl
13.43 MiB 3 h 30 min 1 m 40 x 54 x 102 Download
30_energy_11_FDM(repaired ).stl
14.00 MiB 1 h 24 min 1 m 40 x 23 x 73 Download
31_energy_12_FDM(repaired ).stl
15.57 MiB 4 h 7 min 1 m 35 x 54 x 105 Download
32_energy_13_FDM(repaired ).stl
13.21 MiB 1 h 46 min 1 m 25 x 41 x 92 Download
33_energy_14_FDM(repaired ).stl
18.95 MiB 5 h 41 min 3 m 37 x 64 x 109 Download
34_energy_15_FDM(repaired ).stl
12.99 MiB 2 h 2 min <1 m 29 x 26 x 109 Download
35_energy_16_FDM(repaired ).stl
13.91 MiB 5 h 48 min 4 m 100 x 55 x 94 Download
36_energy_17_FDM(repaired ).stl
13.26 MiB 1 h 9 min <1 m 16 x 23 x 90 Download
37_energy_18_FDM (repaire d).stl
17.45 MiB 2 h 55 min 1 m 85 x 39 x 112 Download
38_energy_19_FDM (repaire d).stl
24.10 MiB 5 h 12 min 3 m 123 x 25 x 98 Download
39_energy_20_FDM(repaired ).stl
15.13 MiB 2 h 20 min 1 m 21 x 46 x 98 Download
40_energy_21_FDM(repaired ).stl
14.40 MiB 1 h 15 min <1 m 19 x 33 x 104 Download
41_platform_1_FDM(repaire d).stl
57.98 MiB 38 h 32 min 18 m 104 x 119 x 89 Download
42_hand_for_platform_1_FD M(repaired).stl
10.58 MiB 44 min <1 m 15 x 51 x 26 Download
43_platform_2_FDM(repaire d).stl
30.15 MiB 27 h 38 min 12 m 117 x 111 x 88 Download
44_platform_3_FDM(repaire d).stl
34.28 MiB 31 h 40 min 14 m 136 x 113 x 79 Download
45_platform_4_FDM(repaire d).stl
41.64 MiB 33 h 56 min 16 m 103 x 105 x 99 Download
46_hand_for_platform_4_FD M(repaired).stl
13.26 MiB 45 min <1 m 12 x 51 x 27 Download
47_ge_lock_10H(x8)_FDM(re paired).stl
0.03 MiB 4 min <1 m 18 x 10 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min 1 m 150 x 18 x 5 Download
...

ABOUT THIS 3D MODEL

Diablo is one of the most famous action role-playing video games and its popularity only grows with time. Diablo is known for its fast-paced gameplay, where players engage in active combat and explore the game's dark world. The game is set in the dark fantasy world of Sanctuary, a place of an endless war between the Burning Hells and High Heavens. The human world of Sanctuary was created by Lilith, the daughter of one of the most powerful Great Evils, Mephisto, and her beloved, Archangel Inarius, as a place for their offspring to live without the intervention of Angels or Demons. But the growing power of the nephalem, the first inhabitants of Sanctuary, led to the conflict between the partners; Lilith was banished into the void and Inarius stayed to rule the Sanctuary having a firm intention to reduce the power of the nephalem at any cost.

The powerful character of the rogue angel inspired our dedicated 3D artist for the creation of this beautiful figurine. Inarius is depicted flying in the air with golden wings behind his back that support the angel. The chosen posture reminds all fans of the episode when the Father rises above the tortured souls when escaping from his prison in Hell. The spear in the right hand serves as a weapon for the archangel and is another symbol of his power. The design of the armour of Inarius is thoroughly chosen: the pauldrons, the belt, and the tassets are decorated with tormented souls' faces, reminding of his thousands of years of being tormented in Hell. Majestic and fully symbolic, Inarius figurine for 3D printing will give your Diablo collection a special charm and exclusivity!

ADAPTATION FOR 3D PRINTING

Inarius for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 60 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the angel to be depicted harmoniously in the intended pose.

The figurine’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, Inarius was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and "Assembly Manual" before getting down to Inarius figurine.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The figurine’s scale was calculated from the height of Inarius. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 versions features:

  • Contains 47 parts;
  • A printed figurine is 470 mm tall, 429 mm wide, 326 mm deep;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 versions features:

  • Contains 27 parts;
  • A printed figurine is 235 mm tall, 214 mm wide, 163 mm deep;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 versions features:

  • Contains 27 parts;
  • A printed figurine is 235 mm tall, 214 mm wide, 163 mm deep;
  • Some parts are manually hollowed out to save resin.

SLS 1.0 versions features:

  • Contains 2 parts - a solid Inarius figurine and a platform.

You can get the figurine of Inarius for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Inarius 3D Printing Figurine on Gambody YouTube channel.

Also, you may like Lilith Diablo IV 3D Printing Figurine and other Diablo 3D Printing Figurines.

_______

FAQ: 

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

  • You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
  • All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings