Premium Stock

Flamethrower Tank 3D Printing Model | Assembly

cm: 18.8 w x 42.5 d x 12.1 h
in: 7.402 w x 16.732 d x 4.764 h

Source Files




Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Flamethrower Tank 3D Printing Model comes in 5 versions for each 3D printer type (FFF/FDM, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1 (repaired).stl
5.50 MiB 4 h 18 min 2 m 47 x 66 x 31 Download
2 (repaired).stl
5.59 MiB 5 h 30 min 3 m 41 x 74 x 36 Download
3 (repaired).stl
0.29 MiB 1 h 13 min 1 m 37 x 24 x 27 Download
4 (repaired).stl
1.79 MiB 14 min <1 m 29 x 15 x 8 Download
5 (repaired).stl
1.79 MiB 14 min <1 m 29 x 15 x 8 Download
6 (repaired).stl
1.11 MiB 1 h 6 min 1 m 36 x 35 x 13 Download
7 (repaired).stl
1.11 MiB 1 h 5 min 1 m 36 x 35 x 13 Download
8 (repaired).stl
0.74 MiB 43 min <1 m 16 x 32 x 23 Download
9 (repaired).stl
0.47 MiB 31 min <1 m 22 x 22 x 24 Download
10 (repaired).stl
28.46 MiB 14 h 23 min 8 m 62 x 75 x 55 Download
11 (repaired).stl
2.34 MiB 19 h 24 min 12 m 97 x 131 x 42 Download
12 (repaired).stl
10.29 MiB 7 h 49 min 4 m 65 x 98 x 23 Download
13 (repaired).stl
14.18 MiB 12 h 43 min 7 m 69 x 127 x 25 Download
14 (repaired).stl
10.57 MiB 7 h 48 min 4 m 65 x 98 x 23 Download
15 (repaired).stl
14.49 MiB 12 h 40 min 7 m 69 x 127 x 25 Download
16 (repaired).stl
7.69 MiB 11 h 53 min 7 m 39 x 42 x 133 Download
17 (repaired).stl
2.21 MiB 2 h 59 min 2 m 30 x 66 x 33 Download
18 (repaired).stl
1.08 MiB 17 min <1 m 31 x 28 x 8 Download
19 (repaired).stl
4.84 MiB 8 h 6 min 5 m 40 x 70 x 54 Download
20 (repaired).stl
2.21 MiB 2 h 59 min 2 m 30 x 66 x 33 Download
21 (repaired).stl
2.63 MiB 1 h 53 min 1 m 42 x 48 x 21 Download
22 (repaired).stl
1.04 MiB 28 min <1 m 7 x 43 x 25 Download
23 (repaired).stl
8.99 MiB 7 h 23 min 4 m 41 x 84 x 44 Download

Flamethrower Tank model for 3D printing is shaped according to the tank with the same name that appears in the widely known and played 40k war video game. The tank is included in the Imperial armed forces, although only in the second-line arsenal.

With an ancient design, Marlcador Infernus’ peak of production was during the Great Crusade as a variant pattern of the Flame Assault Tank. Many tanks have rolled off the production line, being used by the armed forces in battles.

This Flamethrower heavy tank 3D model features a fuel trailer the tank tows behind. This design idea is not strategically brought into application. Due to the position of the fuel trailer the tank is subject to sudden explosions, if dealing with fire.

Flamethrower battle tank made for 3D printing showcases the fuel trailer attached to the tank’s rear. It is accurately reproduced and features another important element of the WH40K Malcador Tank – its Inferno Gun, capable of throwing immense flames. Its fuel trailer and Inferno Gun gave the tank the name of flame thrower tank, clearing mine areas and making them safer for passage.

Flamethrower Tank 3D Print Size

The 3D printable Flamethrower Tank is showcased with its fearful gun in forward position. The model’s replica has all design elements of the game model. It consists of 23 parts, all optimized to fit onto 16x16cm print bed. The engine hoses at the tank’s rear were the most difficult parts to model.

The 3D model is designed to save filament and use little support when being printed. The files have been checked and corrected in Netfabb and have been executed in Cura 15.06. The error-free files can be printed on all types of 3D printers.

Flamethrower heavy tank size in assembly form is: 169mm depth, 250mm wide and 101mm tall. The modeling took about 22 hours.

Download Flamethrower Tank 3D files by clicking on the “Buy” button. Enter your PayPal or credit card details at checkout and download the files of a wonderful battle tank.


On 19.12.2016 the model files have been optimized and made solid. They now are adapted to be 3D printed using any slicing program. 3D model files are already available for purchase and download. 


On 11.07.2018 new version of this model have been added 4 new versions.

The model was completely redone. Here is the list of changes:
1. Changed the cutting of the model for more comfortable printing with the smallest amount of supports.
2. Reworked assembly of the model and Locks were added for connecting the parts.
3. Increased detalization, as well as worked out small technical details in order to maximize the repeat of the game analog model.
4. This update was divided into 4 versions, for comfortable printing on different types of printers. The SLS version of Flamethrower Tank was divided into 2 new scale versions of 1:72 and 1:96.

One part of Lock (2_Ge_lock_10H_(x88)) you need to print 88 times.

New sizes of this model:

FFF/FDM version 1:48 Scale dimensions:
After being printed will stand - 121 mm tall, 188 mm wide, 425 mm deep;

DLP/SLA/SLS version 1:72 Scale dimensions:
After being printed will stand - 81 mm tall, 126 mm wide, 283 mm deep;

SLS version 1:96 Scale dimensions:
After being printed will stand - 61 mm tall, 93 mm wide, 212 mm deep;

There are 29 parts for FFF/FDM version, 14 parts for DLP/SLA version and 3 parts for each SLS versions.

STL files are already available for download in “Source files” tab for (FDM/FFF 2.0), (DLP/SLA 1.0), (SLS 1:72), (SLS 1:96).

Watch the tutorial video on how to assemble new Flamethrower Tank 3D Printing Model at Gambody YouTube channel. 


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine


This model was tested in Cura 3.3.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for Cura and Simplify3D softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s

Print Speed: 45 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
Travel Speed: 60 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 1.3333 mm
Support Z Distance: 0.3 mm
    Support Top Distance: 0.3 mm
    Support Bottom Distance: 0.3 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m


comments powered by Disqus
avatar of Jamy
From the same author:


  • loading reviews..

Similar items

Browse more newly listed 3D printings