MWO Shadow Cat 3D Printing Model | Assembly + Action

cm: 17.4 w x 11.7 d x 23.4 h
in: 6.85 w x 4.606 d x 9.213 h

Source Files




Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

MWO Shadow Cat 3D Printing Model comes in 2 versions for each 3D printer type (FFF/FDM, DLP/SLA/SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
_1_foot_R_FDM (repaired). stl
0.88 MiB 2 h 31 min 1 m 64 x 77 x 15 Download
_2_foot_connector_1_R_FDM (repaired).stl
0.23 MiB 54 min 1 m 11 x 39 x 29 Download
_3_foot_L_FDM (repaired). stl
0.88 MiB 2 h 31 min 1 m 64 x 77 x 15 Download
_4_foot_connector_1_L_FDM (repaired).stl
0.24 MiB 54 min 1 m 11 x 39 x 29 Download
_5_shin_R_FDM (repaired). stl
6.31 MiB 5 h 35 min 3 m 33 x 72 x 96 Download
_6_shin_grid_1_R_FDM (rep aired).stl
0.08 MiB 13 min <1 m 9 x 11 x 13 Download
_7_shin_grid_2_R_FDM (rep aired).stl
0.08 MiB 13 min <1 m 9 x 11 x 13 Download
_8_shin_connector_R_FDM ( repaired).stl
0.12 MiB 9 min <1 m 20 x 13 x 8 Download
_9_shin_L_FDM (repaired). stl
6.31 MiB 5 h 35 min 3 m 33 x 72 x 96 Download
_10_shin_grid_1_L_FDM (re paired).stl
0.08 MiB 13 min <1 m 9 x 11 x 13 Download
_11_shin_grid_2_L_FDM (re paired).stl
0.08 MiB 13 min <1 m 9 x 11 x 13 Download
_12_shin_connector_L_FDM (repaired).stl
0.12 MiB 9 min <1 m 20 x 13 x 8 Download
_13_leg_R_FDM (repaired). stl
0.89 MiB 3 h 7 min 2 m 21 x 57 x 39 Download
_14_leg_connector_R_FDM ( repaired).stl
0.23 MiB 9 min <1 m 20 x 11 x 9 Download
_15_leg_L_FDM (repaired). stl
0.89 MiB 3 h 9 min 2 m 21 x 57 x 39 Download
_16_leg_connector_L_FDM ( repaired).stl
0.23 MiB 9 min <1 m 20 x 11 x 9 Download
_17_pelvis_FDM (repaired) .stl
8.09 MiB 5 h 36 min 3 m Download
_18_pelvis_connector_1_R_ FDM (repaired).stl
0.25 MiB 16 min <1 m 15 x 15 x 7 Download
_19_pelvis_connector_2_R_ FDM (repaired).stl
0.23 MiB 25 min <1 m Download
_20_pelvis_spacer_R_FDM ( repaired).stl
0.17 MiB 12 min <1 m 20 x 20 x 5 Download
_21_pelvis_connector_1_L_ FDM (repaired).stl
0.25 MiB 16 min <1 m Download
_22_pelvis_connector_2_L_ FDM (repaired).stl
0.23 MiB 25 min <1 m 37 x 14 x 6 Download
_23_pelvis_spacer_L_FDM ( repaired).stl
0.17 MiB 12 min <1 m Download
_24_body_connector_1_FDM (repaired).stl
0.29 MiB 17 min <1 m Download
_25_body_connector_2_FDM (repaired).stl
0.10 MiB 19 min <1 m 10 x 42 x 6 Download
_26_body_R_FDM (repaired) .stl
8.15 MiB 12 h 19 min 7 m Download
_27_body_L_FDM (repaired) .stl
8.14 MiB 12 h 21 min 7 m Download
_28_body_cockpit_FDM (rep aired).stl
0.13 MiB 16 min <1 m Download
_29_body_cabine_FDM (repa ired).stl
1.49 MiB 1 h 43 min 1 m Download
_30_body_bot_cap_FDM (rep aired).stl
3.79 MiB 1 h 7 min 1 m Download
_31_body_back_cap_a_FDM ( repaired).stl
0.02 MiB n.a.
30 x 9 x 3 Download
_32_body_back_cap_b_FDM ( repaired).stl
0.04 MiB 11 min <1 m Download
_33_body_cabine_cap_FDM ( repaired).stl
0.04 MiB 6 min <1 m Download
_34_body_window_1_FDM (re paired).stl
0.05 MiB 3 min <1 m Download
_35_body_window_2_FDM (re paired).stl
0.02 MiB 2 min <1 m Download
_36_body_window_1_R_FDM ( repaired).stl
0.01 MiB 1 min <1 m Download
_37_body_window_1_L_FDM ( repaired).stl
0.01 MiB 1 min <1 m Download
_38_body_anten_FDM (repai red).stl
0.72 MiB 19 min <1 m Download
_39_arm_connector_1_R_FDM (repaired).stl
0.25 MiB 16 min <1 m Download
_40_arm_connector_2_R_FDM (repaired).stl
0.09 MiB 14 min <1 m Download
_41_arm_R_FDM (repaired). stl
0.41 MiB 1 h 20 min 1 m Download
_42_arm_connector_1_L_FDM (repaired).stl
0.25 MiB 16 min <1 m 15 x 15 x 7 Download
_43_arm_connector_2_L_FDM (repaired).stl
0.09 MiB 14 min <1 m Download
_44_arm_L_FDM (repaired). stl
0.41 MiB 1 h 20 min 1 m Download
_45_hand_R_FDM (repaired) .stl
0.34 MiB 3 h 20 min 2 m Download
_46_hand_L_FDM (repaired) .stl
0.34 MiB 3 h 19 min 2 m Download
_47_wrist_R_FDM (repaired ).stl
0.12 MiB 1 h 10 min 1 m 15 x 19 x 59 Download
_48_wrist_L_FDM (repaired ).stl
0.15 MiB 1 h 39 min 1 m Download
_49_Ge_lock_10H_x7_FDM (r epaired).stl
0.03 MiB 4 min <1 m 18 x 10 x 2 Download
_50_foot_connector_2_R_FD M (repaired).stl
0.21 MiB 8 min <1 m 7 x 41 x 5 Download
_51_foot_connector_2_L_FD M (repaired).stl
0.21 MiB 8 min <1 m Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m Download
Tag (repaired).stl
1.70 MiB 1 h 16 min 1 m Download


Cats are usually considered to be gentle and domestic creatures, but not in the MechWarrior Online universe! The MWO Cats are fast, angry and powerful, always ready to strike the enemies from shadows in the most unexpected of moments. Shadow Cat is exactly one of such battle robots! Versatile and hardy, Shadow Cat is a medium Clan OmniMech produced with the help of the advanced weight-saving technology. The primary configuration of the Mech is armed with one CGauss and a pair of CERML's which make Shadow Cat capable of dealing much damage at medium- to long-range. Invisible thanks to its compact size, and nimble thanks to built-in MASC, six fixed Jump Jets and Extralight Fusion Engine, Shadow Cat can accelerate up to 120 km/hour and more! With all these technical specifications taken into consideration Shadow Cat clearly lives up to its name! The gracefulness and agility of the OmniMech have been masterly implemented into the design of Shadow Cat 3D printing model. Our contributing 3D artist spent circa 100 hours to prepare the 3D printing Mech known for its manoeuvrability and durability. The Shadow Cat for 3D printing wields a CGauss in his right arm, while a default hand actuator is built in the left arm. The Mech is fitted with a paned cockpit that even has a tiny pilot seat and a dashboard inside! The arms, as well as the rest of the OmniMech’s armament, is located at the Mech’s torso level which facilitates the firing from the sniping spot. The Shadow Cat is a popular OmniMech both with the Clan Nova Cat and the MWO fans all around the world. Print your very own Shadow Cat model and embark on action-packed battles!


MWO Shadow Cat 3D printing model is an action assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 25 hours in total. In order for you to receive the cleanest 3D printing result possible and to minimize the amount of filament needed for generated support, the Mech model was divided into many assembly parts. All parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and to make sure that the 3D printing beginners won't face difficulties when placing the parts on a build plate. To allow the Shadow Cat’s multidirectional movement and steadiness of the joints, the usual ball-and-socket joints and one-axis joints with lockers were discarded. Instead, for the highly articulated Mech to stand firmly in any position you may choose there was a ratchet mechanism introduced into the model’s main joints (legspelvis, and “arms”). The joints that ensure the Mech's movability are provided as separate files for you to be able to print them again if the joints' friction happens to lose rigidity. A spot inside the Shadow Cat’s body (in FFF/FDM 1.0) allows to hide a battery inside the Mech’s head and introduce LED wiring to light up the cockpit. The CGauss and hand actuator that the Shadow Cat is equipped with are assembled in such a way that can be potentially replaced when the alternative Guns Pack for the Mech is released. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the Shadow Cat's actual height that is 12000 mm. The 3D printing model's chosen scale is 1:60 for the FFF/FDM version and 1:100 for the DLP/SLA/SLS versions.


FFF/FDM 1.0 version features:
- Contains 51 parts;
- A printed model is 234 mm tall, 174 mm wide, 117 mm deep;
- Assembly kit includes locks to connect the parts securely without glue. The lock 49_Ge_lock_10H_x7 needs to be printed 7 times;
- Made with several sets of special joints to ensure the model's articulation (ankleknee, hip, pelvis and shoulder joints are movable). These joints can hold any position you may choose;
- The first 3D printing Mech to feature a cockpit!;
- The windows of the cockpit are provided separately and can be printed with transparent filament;
- There is an option to introduce LED wiring throughout Mech's partially hollow body in order to light up the cockpit;
- It is highly recommended that you watch "Assembly video" in the photo preview section and read "Assembly Manual" in PDF before assembling the Shadow Cat;
- All parts are divided in such a way that you will print them with the smallest number of support structures and so to ensure the smoothness of the details’ surfaces.

DLP/SLA/SLS 1.0 version features:
- Contains 26 parts;
- A printed model is 140 mm tall, 104 mm wide, 70 mm deep;
- Made with several sets of special joints to ensure the model's articulation (simplified as compared with FFF/FDM 1.0) that can hold any position you may choose;
- The first 3D printing Mech to feature a cockpit!;
- The windows of the cockpit are provided separately and can be printed with transparent material;
- It is highly recommended that you watch "Assembly video" in the photo preview section and read "Assembly Manual" in PDF before assembling the Shadow Cat;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.


- STL files of MWO Shadow Cat 3D Printing Model which consist of 77 parts;
- 2 versions of files of this model for FFF/FDM and DLP/SLA/SLS printers;
- High-poly detailed model of MWO Shadow Cat;
Assembly Manual for FFF/FDM 1.0, DLP/SLA/SLS 1.0 versions in PDF format;
- Detailed settings that we provide as a recommendation for Cura, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the model of MWO Shadow Cat for 3D printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble MWO Shadow Cat​​​​​​​ 3D Printing Model at Gambody YouTube channel.

Also, you may like other Mech Warrior 3D Printing Models.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at


You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
  Detect thin walls: Check
  Detect bridging perimeters: Check
  Seam position: Random
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
  Infill/Perimeters overlap: 20%
  Bridge flow ratio: 0.95
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm


comments powered by Disqus

Similar items

Browse more newly listed 3D printings