Wolverine X-Men 3D Printing Figurine | Assembly

(1)
cm: 20.5 w x 18.5 d x 23.6 h
in: 8.071 w x 7.283 d x 9.291 h

Source Files

|

Description

|

Printing Details

This 3D model of Wolverine X-Men consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 4 versions of Wolverine X-Men STL files for FFF/FDM, DLP/SLA, DLP/SLA Eco, SLS - files for all versions are available for download after the purchase;
  • STL files of high-poly Wolverine X-Men Figurine for 3D printing consist of 35 files;
  • Sizes for:
  • FFF/FDM: 236 mm tall, 205 mm wide, 185 mm deep;
  • DLP/SLA/SLS: 118 mm tall, 103 mm wide, 93 mm deep;
  • Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
  • Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
21.69 MiB 2 h 20 min 1 m 41 x 40 x 48 Download
2_body_FDM(repaired).stl
28.15 MiB 8 h 23 min 5 m 54 x 53 x 72 Download
3_arm_R_FDM(repaired).stl
15.30 MiB 2 h 3 min 1 m 36 x 48 x 27 Download
4_hand_R_FDM(repaired).st l
18.27 MiB 1 h 12 min 1 m 19 x 29 x 59 Download
5_arm_L_FDM(repaired).stl
16.99 MiB 1 h 39 min 1 m 31 x 34 x 48 Download
6_hand_L_FDM(repaired).st l
19.15 MiB 1 h 11 min 1 m 22 x 35 x 56 Download
7_leg_R_FDM(repaired).stl
26.13 MiB 5 h 33 min 3 m 53 x 51 x 90 Download
8_leg_L_FDM(repaired).stl
19.16 MiB 4 h 34 min 3 m 58 x 59 x 53 Download
9_foot_R_FDM(repaired).st l
19.17 MiB 2 h 13 min 1 m 25 x 49 x 60 Download
10_foot_L_FDM(repaired).s tl
19.03 MiB 1 h 60 min 1 m 24 x 47 x 57 Download
11_scapular_R_FDM(repaire d).stl
16.17 MiB 49 min <1 m 28 x 37 x 18 Download
12_scapular_L_FDM(repaire d).stl
16.61 MiB 53 min <1 m 37 x 25 x 17 Download
13_iron_beam_1_FDM(repair ed).stl
19.90 MiB 6 h 19 min 4 m 58 x 39 x 105 Download
14_iron_beam_2_FDM(repair ed).stl
10.47 MiB 2 h 17 min 1 m 28 x 22 x 76 Download
15_platform_FDM(repaired) .stl
37.69 MiB 39 h 40 min 21 m 165 x 165 x 54 Download
16_ge_lock_7S(x1)_FDM(rep aired).stl
0.02 MiB 4 min <1 m 7 x 18 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min 1 m 150 x 18 x 5 Download
...

ABOUT THIS 3D MODEL

Wolverine is undoubtedly one of the most popular and loved X-Men characters. Rebel by nature, Logan is not afraid of going against the established order and acting on his own. The mutant was born with retractable forearm claws, he possesses enhanced physical parameters, and a powerful healing factor. Independent and ruthless against his enemies, Wolverine is ready to protect those he loves and cares for. Logan has been depicted as a member of different teams, such as the X-Men, X-Force, Alpha Flight, the Fantastic Four, and the Avengers.

Being a part of the fanbase of The Wolverine, our inspired 3D artist created this outstanding figurine for 3D printing. The mutant is depicted in his famous costume that fits closely to the body. The suit features decorative shoulder pads; the pointy mask on the face of Logan and the retractable claws passing from his arms make the character look like an animal-like creature. The facial expression of the superhero from Marvel comics deserves particular attention. Wolverine is shown in an attacking pose: anger and hatred can be seen on his face, every muscle on Logan’s body is tense. Highly detailed and very realistic, this impressive figurine for 3D printing is a must for all X-Men fans!

ADAPTATION FOR 3D PRINTING

Wolverine X-Men for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 68 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the mutat to be depicted harmoniously in the intended pose.

The figurine’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, Wolverine was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and "Assembly Manual" before getting down to Wolverine X-Men.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The figurine’s scale was calculated from the height of Wolverine which is 1880 mm. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 versions features:

  • Contains 16 parts;
  • A printed figurine is 236 mm tall, 205 mm wide, 185 mm deep;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 versions features:

  • Contains 8 parts;
  • A printed figurine is 118 mm tall, 103 mm wide, 93 mm deep;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 versions features:

  • Contains 8 parts;
  • A printed figurine is 118 mm tall, 103 mm wide, 93 mm deep;
  • Some parts are manually hollowed out to save resin.

SLS 1.0 versions features:

  • Contains 3 parts - a solid Wolverine figurine on and separately from the platform.

You can get the figurine of Wolverine X-Men for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Wolverine X-Men 3D Printing Figurine on Gambody YouTube channel.

Also, you may like other X-Men and Marvel 3D Printing Figurines.

_______

FAQ: 

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings