Make pre-order

BT-7274 3D Printing Model | Assembly + Action

(4)
average
cm: 20.4 w x 16.4 d x 37.8 h
in: 8.031 w x 6.457 d x 14.882 h
10
BUY FOR  $29.99

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

BT-7274 3D Printing Model comes in 2 versions for each 3D printer type (FFF/FDM, DLP/SLA/SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament
1_foot_R_FDM (repaired).s tl
7.52 MiB 4 h 55 min
2 m
Download
2_foot_connector_R_FDM (r epaired).stl
0.53 MiB 35 min
<1 m
Download
3_shin_R_FDM (repaired).s tl
13.85 MiB 5 h 39 min
3 m
Download
4_shin_flap_R_FDM (repair ed).stl
0.04 MiB 10 min
<1 m
Download
5_shin_connector_R_FDM (r epaired).stl
0.56 MiB 40 min
<1 m
Download
6_leg_R_FDM (repaired).st l
11.91 MiB 4 h 51 min
3 m
Download
7_leg_flap_R_FDM (repaire d).stl
0.32 MiB 29 min
<1 m
Download
8_leg_connector_R_FDM (re paired).stl
0.56 MiB 1 h 19 min
1 m
Download
9_hip_R_FDM (repaired).st l
16.15 MiB 17 h 50 min
11 m
Download
10_hip_gofra_R_FDM (repai red).stl
1.38 MiB 2 h 4 min
1 m
Download
11_axis_2_B_Joint_R_FDM ( repaired).stl
0.35 MiB 34 min
<1 m
Download
12_b_claw_R_FDM (repaired ).stl
0.16 MiB 14 min
<1 m
Download
13_foot_L_FDM (repaired). stl
7.52 MiB 4 h 55 min
2 m
Download
14_foot_connector_L_FDM ( repaired).stl
0.52 MiB 35 min
<1 m
Download
15_shin_L_FDM (repaired). stl
13.82 MiB 5 h 42 min
3 m
Download
16_shin_flap_L_FDM (repai red).stl
0.04 MiB 10 min
<1 m
Download
17_shin_connector_L_FDM ( repaired).stl
0.56 MiB 40 min
<1 m
Download
18_leg_L_FDM (repaired).s tl
11.90 MiB 4 h 54 min
3 m
Download
19_leg_flap_L_FDM (repair ed).stl
0.32 MiB 29 min
<1 m
Download
20_leg_connector_L_FDM (r epaired).stl
0.56 MiB 1 h 19 min
1 m
Download
21_hip_L_FDM (repaired).s tl
16.04 MiB 17 h 31 min
11 m
Download
22_hip_gofra_L_FDM (repai red).stl
1.38 MiB 2 h 6 min
1 m
Download
23_axis_2_B_Joint_L_FDM ( repaired).stl
0.35 MiB 34 min
<1 m
Download
24_b_claw_L_FDM (repaired ).stl
0.16 MiB 14 min
<1 m
Download
25_pelvis_FDM (repaired). stl
40.01 MiB 23 h 39 min
14 m
Download
26_pelvis_armor_f_R_FDM ( repaired).stl
0.93 MiB 25 min
<1 m
Download
27_pelvis_armor_b_R_FDM ( repaired).stl
2.81 MiB 52 min
<1 m
Download
28_pelvis_pipe_flexible_R _FDM (repaired).stl
0.93 MiB 11 min
<1 m
Download
29_pelvis_armor_f_L_FDM ( repaired).stl
0.93 MiB 24 min
<1 m
Download
30_pelvis_armor_b_L_FDM ( repaired).stl
2.81 MiB 52 min
<1 m
Download
31_pelvis_pipe_flexible_L _FDM (repaired).stl
0.93 MiB 11 min
<1 m
Download
32_pelvis_pipe_f_FDM (rep aired).stl
0.17 MiB 22 min
<1 m
Download
33_pelvis_pipe_b_FDM (rep aired).stl
0.56 MiB 11 min
<1 m
Download
34_pelvis_back_cap_FDM (r epaired).stl
0.08 MiB 30 min
<1 m
Download
35_spinal_FDM (repaired). stl
12.05 MiB 6 h 47 min
4 m
Download
36_cam_for_stl_no_support _FDM (repaired).stl
3.17 MiB 16 min
<1 m
Download
37_turbine_R_FDM (repaire d).stl
0.99 MiB 13 min
<1 m
Download
38_turbine_flap_R_FDM (re paired).stl
0.02 MiB 9 min
<1 m
Download
39_body_flap_b_R_FDM (rep aired).stl
0.04 MiB 18 min
<1 m
Download
40_top_anten_R_FDM (repai red).stl
0.03 MiB 16 min
<1 m
Download
41_shoulder_fan_R_FDM (re paired).stl
0.37 MiB 4 h 46 min
3 m
Download
42_body_loop_top_R_FDM (r epaired).stl
3.76 MiB 5 min
<1 m
Download
43_body_pipe_R_FDM (repai red).stl
0.73 MiB 23 min
<1 m
Download
44_luke_a_claw_R_FDM (rep aired).stl
0.04 MiB 7 min
<1 m
Download
45_luke_b_claw_R_FDM (rep aired).stl
0.03 MiB 4 min
<1 m
Download
46_luke_c_claw_R_FDM (rep aired).stl
0.03 MiB 4 min
<1 m
Download
47_turbine_L_FDM (repaire d).stl
0.99 MiB 13 min
<1 m
Download
48_turbine_flap_L_FDM (re paired).stl
0.02 MiB 9 min
<1 m
Download
49_turbine_Center_FDM (re paired).stl
22.31 MiB 56 min
1 m
Download
50_body_flap_b_L_FDM (rep aired).stl
0.04 MiB 18 min
<1 m
Download
51_body_flap_b_center_FDM (repaired).stl
2.89 MiB 1 h 25 min
1 m
Download
52_top_anten_L_FDM (repai red).stl
0.03 MiB 16 min
<1 m
Download
53_shoulder_lamp_right_FD M (repaired).stl
3.33 MiB 15 min
<1 m
Download
54_shoulder_fan_L_FDM (re paired).stl
0.37 MiB 4 h 46 min
3 m
Download
55_body_loop_top_L_FDM (r epaired).stl
3.76 MiB 5 min
<1 m
Download
56_luke_top_c_FDM (repair ed).stl
5.88 MiB 1 h 1 min
1 m
Download
57_visor_FDM (repaired).s tl
3.62 MiB 58 min
1 m
Download
58_visor_claw_FDM (repair ed).stl
0.09 MiB 6 min
<1 m
Download
59_visor_joint_FDM (repai red).stl
0.28 MiB 14 min
<1 m
Download
60_body_pipe_L_FDM (repai red).stl
0.73 MiB 23 min
<1 m
Download
61_luke_a_FDM (repaired). stl
5.92 MiB 3 h 53 min
2 m
Download
62_luke_a_claw_L_FDM (rep aired).stl
0.04 MiB 7 min
<1 m
Download
63_luke_b_FDM (repaired). stl
23.46 MiB 2 h 15 min
1 m
Download
64_luke_b_claw_L_FDM (rep aired).stl
0.03 MiB 4 min
<1 m
Download
65_luke_c_FDM (repaired). stl
2.31 MiB 1 h 3 min
1 m
Download
66_luke_c_claw_L_FDM (rep aired).stl
0.03 MiB 4 min
<1 m
Download
67_shoulder_gun_1_R_FDM ( repaired).stl
0.74 MiB 31 min
<1 m
Download
68_shoulder_gun_2_R_FDM ( repaired).stl
0.62 MiB 30 min
<1 m
Download
69_shoulder_gun_3_R_FDM ( repaired).stl
0.79 MiB 52 min
<1 m
Download
70_shoulder_gun_4_R_FDM ( repaired).stl
0.35 MiB 10 min
<1 m
Download
71_shoulder_gun_5_R_FDM ( repaired).stl
0.91 MiB 2 h 11 min
1 m
Download
72_shoulder_arm_R_FDM (re paired).stl
1.61 MiB 1 h 52 min
1 m
Download
73_arm_joint_R_FDM (repai red).stl
0.28 MiB 43 min
<1 m
Download
74_arm_claw_R_FDM (repair ed).stl
0.69 MiB 18 min
<1 m
Download
75_arm_R_FDM (repaired).s tl
35.94 MiB 6 h 47 min
4 m
Download
76_hand_connector_R_FDM ( repaired).stl
0.53 MiB 28 min
<1 m
Download
77_hand_R_FDM (repaired). stl
10.35 MiB 6 h 44 min
4 m
Download
78_hand_flap_R_FDM (repai red).stl
0.53 MiB 13 min
<1 m
Download
79_wrist_joint_R_FDM (rep aired).stl
0.28 MiB 25 min
<1 m
Download
80_wrist_claw_R_FDM (repa ired).stl
0.69 MiB 9 min
<1 m
Download
81wrist_2_R_FDM (repaired ).stl
3.49 MiB 57 min
1 m
Download
82_wrist_1_R_FDM (repaire d).stl
6.06 MiB 1 h 46 min
1 m
Download
83_finger_a_1_R_FDM (repa ired).stl
0.19 MiB 8 min
<1 m
Download
84_finger_a_2_R_FDM (repa ired).stl
0.70 MiB 17 min
<1 m
Download
85_finger_a_3_R_FDM (repa ired).stl
0.67 MiB 16 min
<1 m
Download
86_finger_b_1_R_FDM (repa ired).stl
0.67 MiB 16 min
<1 m
Download
87_finger_b_2_R_FDM (repa ired).stl
0.70 MiB 17 min
<1 m
Download
88_finger_b_3_R_FDM (repa ired).stl
0.19 MiB 8 min
<1 m
Download
89_finger_c_1_R_FDM (repa ired).stl
0.67 MiB 16 min
<1 m
Download
90_finger_c_2_R_FDM (repa ired).stl
0.70 MiB 17 min
<1 m
Download
91_finger_c_3_R_FDM (repa ired).stl
0.19 MiB 8 min
<1 m
Download
92_finger_d_1_R_FDM (repa ired).stl
0.70 MiB 26 min
<1 m
Download
93_finger_d_2_R_FDM (repa ired).stl
0.19 MiB 14 min
<1 m
Download
94_shoulder_gun_1_L_FDM ( repaired).stl
0.74 MiB 31 min
<1 m
Download
95_shoulder_gun_2_L_FDM ( repaired).stl
0.62 MiB 30 min
<1 m
Download
96_shoulder_gun_3_L_FDM ( repaired).stl
0.79 MiB 52 min
<1 m
Download
97_shoulder_gun_4_L_FDM ( repaired).stl
0.39 MiB 10 min
<1 m
Download
98_shoulder_gun_5_L_FDM ( repaired).stl
0.91 MiB 2 h 9 min
1 m
Download
99_shoulder_arm_L_FDM (re paired).stl
1.61 MiB 1 h 52 min
1 m
Download
100_arm_joint_L_FDM (repa ired).stl
0.28 MiB 43 min
<1 m
Download
101_arm_claw_L_FDM (repai red).stl
0.69 MiB 19 min
<1 m
Download
102_arm_L_FDM (repaired). stl
35.94 MiB 6 h 50 min
4 m
Download
103_hand_connector_L_FDM (repaired).stl
0.53 MiB 28 min
<1 m
Download
104_hand_L_FDM (repaired) .stl
10.36 MiB 6 h 46 min
4 m
Download
105_hand_flap_L_FDM (repa ired).stl
0.53 MiB 12 min
<1 m
Download
106_wrist_joint_L_FDM (re paired).stl
0.28 MiB 24 min
<1 m
Download
107_wrist_claw_L_FDM (rep aired).stl
0.69 MiB 9 min
<1 m
Download
108_wrist_2_L_FDM (repair ed).stl
3.49 MiB 57 min
1 m
Download
109_wrist_1_L_FDM (repair ed).stl
6.05 MiB 1 h 46 min
1 m
Download
110_finger_a_1_L_FDM (rep aired).stl
0.19 MiB 9 min
<1 m
Download
111_finger_a_2_L_FDM (rep aired).stl
0.70 MiB 17 min
<1 m
Download
112_finger_a_3_L_FDM (rep aired).stl
0.67 MiB 16 min
<1 m
Download
113_finger_b_1_L_FDM (rep aired).stl
0.67 MiB 16 min
<1 m
Download
114_finger_b_2_L_FDM (rep aired).stl
0.70 MiB 17 min
<1 m
Download
115_finger_b_3_L_FDM (rep aired).stl
0.19 MiB 9 min
<1 m
Download
116_finger_c_1_L_FDM (rep aired).stl
0.67 MiB 16 min
<1 m
Download
117_finger_c_2_L_FDM (rep aired).stl
0.70 MiB 17 min
<1 m
Download
118_finger_c_3_L_FDM (rep aired).stl
0.19 MiB 9 min
<1 m
Download
119_finger_d_1_L_FDM (rep aired).stl
0.70 MiB 26 min
<1 m
Download
120_finger_d_2_L_FDM (rep aired).stl
0.19 MiB 14 min
<1 m
Download
121_gun_1_FDM (repaired). stl
5.34 MiB 9 h 30 min
5 m
Download
122_gun_2_FDM (repaired). stl
14.57 MiB 10 h 17 min
6 m
Download
123_gun_3_FDM (repaired). stl
1.90 MiB 8 h 1 min
4 m
Download
124_Ge_lock_10H_x37_FDM ( repaired).stl
0.03 MiB 4 min
<1 m
Download
125_body_FDM (repaired).s tl
80.65 MiB n.a.
n.a.
Download
126_seat_FDM (repaired).s tl
0.51 MiB 3 h 1 min
2 m
Download
127_shoulder_fan_cap_R_FD M (repaired).stl
0.09 MiB 23 min
<1 m
Download
128_shoulder_fan_cap_L_FD M (repaired).stl
0.09 MiB 23 min
<1 m
Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
Download
Tag (repaired).stl
1.70 MiB 1 h 16 min
1 m
Download

ABOUT THIS 3D MODEL

BT-7274, also known as Bravo-Tango and is often simply referred to as BT, is a Vanguard-class Titan who is the star of the first-person shooter video game Titanfall 2. This Titan is extremely well-loved with the fans of the franchise for being the first robot with a voice of his own. BT is much more than a mechanised exoskeleton - piloted by militia rifleman Jack Cooper on the streets of war-torn future the Titan often goes beyond doing his duty, showing his own ideas and a distinct personality. But at the same time, when it comes to duty, BT has no match in strict observance of the three protocols: Link to Pilot, Uphold the Mission and Protect the Pilot. Inspired by the touching bond between a Titan and its human pilot, the author of the BT model for 3D printing spent 187 hours in total to give every Titanfall enthusiast a chance to obtain a very own loyal companion. The 3D artist equipped his BT for 3D printing with “20mm armour piercing automatic rifle” XO16A2 Chaingun and BT’s trademark missile pods that are known to be able to target multiple enemies simultaneously. The cockpit of the Bravo-Tango was worked out by the author of the model to the finest details and made accessible making it ready for Jack Cooper to pilot. The Vanguard-class Titan is highly detailed and is equipped with many hatches and intricate mechanisms. 3D printing BT's "eye", which contains all of his AI data, is also present - just don’t forget to paint it blue once you order your perfect Titan for 3D printing!

ADAPTATION FOR 3D PRINTING

BT-7274 model for 3D printing is a highly articulated action assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 62 hours in total. In order to ensure the Titan’s multidirectional movement, it was divided into many assembly parts and special mechanisms were introduced into all model’s joints to give you an opportunity to display BT in a variety of positions, i.e. robot’s shoulders, elbows, wrists, knees, feet, every single finger’s phalange, BT’s eye etc. are movable and the missile pods on the model’s shoulders are fully extendable with the missile doors opening. The robot is equipped with its primary XO16A2 Chaingun that comes in several separate parts for you to receive the cleanest printed result as well. The front part of Titan can be fully opened for you to reveal highly-detailed pilot’s cockpit that can also be accessed through the opening top hatch. All assembly parts are provided in STL files in recommended positions that were worked out so to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. We highly recommend that you watch "Assembly video" in the photo preview section before assembling the Titan. 

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from BT-7274's actual height that is 6200 mm. The 3D printing model's chosen scale is 1/16 for the FFF/FDM version and 1/32 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 128 parts;
- A printed model is 378 mm tall, 204 mm wide, 164 mm deep;
- Assembly kit includes locks to connect the parts without glue. One lock 124_Ge_lock_10H_x37​ needs to be printed 37 times;
- Wires 28_pelvis_pipe_flexible_R _FDM​ and 31_pelvis_pipe_flexible_L _FDM that are to be inserted into the robot's pelvis are recommended to be printed with flexible filament to preserve legs’ articulation; camera part 36_cam_for_stl_no_support _FDM​ is to be printed without supports (support parameter should be disabled in your slicer);
- Made with several sets of special joints to ensure full articulation of the model's limbs and body;
- The front part of Titan can be fully opened for you to access highly-detailed cockpit;
- Made with opening hatches, fully extendable and spinning missile pods and movable eye socket;
- Titan is equipped with its primary XO16A2 Chaingun weapon;
- All parts are divided in such a way that you will print them with the smallest number of support structures and so to ensure the smoothness of the details’ surfaces.

DLP/SLA/SLS 1.0 version features:
- Contains 76 parts;
- A printed model is 189 mm tall, 102 mm wide, 82 mm deep;
- Made with several sets of special joints to ensure full articulation of the model's limbs and body;
- The front part of Titan can be fully opened for you to access highly-detailed cockpit;
- Made with opening hatches, fully extendable and spinning missile pods and movable eye socket;
- Titan is equipped with its primary XO16A2 Chaingun weapon;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of BT-7274​ 3D Printing Model which consist of 202 parts;
- 2 versions of files of this model for FFF/FDM and DLP/SLA/SLS printers;
- High-poly detailed model of BT-7274​;
- Detailed settings that we provide as a recommendation for Cura 3.5.1, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the model of BT-7274​ for 3D printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble BT-7274​ 3D Printing Model at Gambody YouTube channel.

Also, you may like the Atlas Titan 3D Printing Model as well as other Robot 3D Printing Models.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.4.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell
Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill
Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material
Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s

Speed 
Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 3 mm
Support Z Distance: 0.1 mm
    Support Top Distance: 0.1 mm
    Support Bottom Distance: 0.1 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus
Other author's 3D printings

Tags

bt-7274, titanfall, robot, titan, assembly, action, game

Similar items

Browse more newly listed 3D printings