Cyber Mewtwo in Capsule 3D Printing Figurine | Assembly

ABOUT THIS 3D MODEL

The Pokémon video game contributed to the creation of anime television series that has become the most successful video game adaptation of all time. The Pokémon includes more than 1000 fictional species of collectible monsters, each with unique design, powers and skills. Mewtwo was introduced in Generation I and ​​was the strongest in the original games in respect of base statistic distribution. It is a representative of Psychic type Pokémon that are very effective against Fighting- and Poison-type Pokémon. Mewtwo is a bipedal, humanoid creature with some feline features. Mewtwo is a tough opponent and even is ​​capable of levitation, telepathy, and mind control.

Inspired by the unusual video game appearance of Mewtwo, our contributing 3D artist created this outstanding figurine for 3D printing. Cyber Mewtwo is depicted as a modified type of Pokémon that has some cyborg features. The body of Mewtwo is protected by armor, its head is hidden under the full-face helmet. The Pokémon is shown in a levitating pose and only its thick tail is touching the capsule bottom. The figurine looks so non-ordinary and enigmatically that it’s difficult to stop contemplating it! With Cyber Mewtwo your collection will receive an invaluable exhibit!

ADAPTATION FOR 3D PRINTING

Cyber Mewtwo for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 29 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the creature to be depicted harmoniously in the intended pose.

The figurine’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, Cyber Mewtwo was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and "Assembly Manual" before getting down to Cyber Mewtwo in Capsule.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model’s scale was calculated from the height of the Cyber Mewtwo. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 versions features:

• Contains 37 parts;
• A printed figurine is 415 mm tall, 154 mm wide, 154 mm deep;
• Two capsule options - solid and cut in half;
• All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 versions features:

• Contains 26 parts;
• A printed figurine is 208 mm tall, 77 mm wide, 77 mm deep;
• Two capsule options - solid and cut in half;
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 versions features:

• Contains 26 parts;
• A printed figurine is 208 mm tall, 77 mm wide, 77 mm deep;
• Two capsule options - solid and cut in half;
• Some parts are manually hollowed out to save resin.

SLS 1.0 versions features:

• Contains 4 parts - a solid Cyber Mewtwo figurine with the capsule.

You can get the model of Cyber Mewtwo in Capsule for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Cyber Mewtwo in Capsule 3D Printing Figurine on Gambody YouTube channel.

Also, you may like other Pokemon and Cartoon models and figurines for 3D Printing.

_______

FAQ: 

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning? 
• How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

• You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
• All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download