Make pre-order

Milano 3D Printing Model | Assembly

average
cm: 39.8 w x 18.3 d x 16.8 h
in: 15.669 w x 7.205 d x 6.614 h
59
BUY FOR  $34.99

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Milano 3D Printing Model comes in 2 versions for FFF/FDM and DLP/SLA/SLS 3D printers. STL files of both versions are available for download after the purchase.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_glass1_fdm (repaired).s tl
0.51 MiB 8 min
<1 m
3 x 20 x 13 Download
2_glass2_fdm (repaired).s tl
0.34 MiB 1 min
<1 m
9 x 7 x 1 Download
3_glass3_fdm (repaired).s tl
0.44 MiB 6 min
<1 m
13 x 2 x 15 Download
4_glass4_fdm (repaired).s tl
0.40 MiB 3 min
<1 m
1 x 13 x 9 Download
5_glass5_fdm (repaired).s tl
0.51 MiB 8 min
<1 m
3 x 20 x 13 Download
6_glass6_fdm (repaired).s tl
0.34 MiB 1 min
<1 m
9 x 7 x 1 Download
7_glass7_fdm (repaired).s tl
0.44 MiB 6 min
<1 m
2 x 15 x 13 Download
8_glass8_fdm (repaired).s tl
0.40 MiB 3 min
<1 m
1 x 13 x 9 Download
9_glass9_fdm (repaired).s tl
0.64 MiB 4 min
<1 m
2 x 11 x 11 Download
10_EngineDetail_fdm (repa ired).stl
0.46 MiB 15 min
<1 m
27 x 28 x 3 Download
11_EngineDetail_fdm (repa ired).stl
0.46 MiB 15 min
<1 m
27 x 28 x 3 Download
14_Headlamp4_fdm (repaire d).stl
0.09 MiB 6 min
<1 m
17 x 17 x 1 Download
15_Headlamp5_fdm (repaire d).stl
0.04 MiB 9 min
<1 m
27 x 28 x 1 Download
16_Headlamp6_fdm (repaire d).stl
0.04 MiB 9 min
<1 m
27 x 28 x 1 Download
17_Headlamp3_fdm (repaire d).stl
0.09 MiB 6 min
<1 m
17 x 17 x 1 Download
18_Headlamp7_fdm (repaire d).stl
0.02 MiB 2 min
<1 m
18 x 12 x 1 Download
19_Headlamp8_fdm (repaire d).stl
0.02 MiB 2 min
<1 m
18 x 12 x 1 Download
20_Ge_lock_x3_fdm (repair ed).stl
0.03 MiB 4 min
<1 m
18 x 10 x 2 Download
21_WingdetailL_fdm (repai red).stl
0.81 MiB 9 min
<1 m
19 x 21 x 5 Download
22_WingdetailR_fdm (repai red).stl
0.81 MiB 9 min
<1 m
19 x 21 x 5 Download
23_Headlamp2_fdm (repaire d).stl
0.02 MiB 3 min
<1 m
7 x 25 x 2 Download
24_Headlamp1_fdm (repaire d).stl
0.02 MiB 3 min
<1 m
7 x 25 x 2 Download
25_detailL_fdm (repaired) .stl
10.24 MiB 1 h 5 min
1 m
Download
26_detailR_fdm (repaired) .stl
10.24 MiB 1 h 5 min
1 m
42 x 42 x 15 Download
31_BaseEngine_fdm (repair ed).stl
3.20 MiB 1 h 28 min
1 m
20 x 21 x 57 Download
34_Cockpit_fdm (repaired) .stl
1.42 MiB 30 min
<1 m
27 x 19 x 11 Download
35_TopWing1_fdm (repaired ).stl
2.31 MiB 3 h 17 min
2 m
48 x 78 x 16 Download
36_TopWing2_fdm (repaired ).stl
1.28 MiB 27 min
<1 m
69 x 7 x 14 Download
37_TopWing3_fdm (repaired ).stl
1.28 MiB 28 min
<1 m
65 x 26 x 14 Download
38_ClawB_X2_fdm (repaired ).stl
0.15 MiB 4 min
<1 m
8 x 7 x 4 Download
39_WingBody_fdm (repaired ).stl
21.86 MiB 10 min
<1 m
31 x 8 x 15 Download
40_ClawA_X2_fdm (repaired ).stl
0.15 MiB n.a.
n.a.
10 x 9 x 5 Download
41_WingBody_fdm (repaired ).stl
21.85 MiB 11 min
<1 m
Download
42_WingL3_fdm (repaired). stl
0.64 MiB 28 min
<1 m
46 x 22 x 19 Download
43_WingR3_fdm (repaired). stl
0.64 MiB 28 min
<1 m
46 x 22 x 19 Download
44_Body_det1_fdm (repaire d).stl
0.20 MiB 14 min
<1 m
19 x 13 x 12 Download
45_Body_det2_fdm (repaire d).stl
0.20 MiB 14 min
<1 m
19 x 13 x 12 Download
46_Body_det3_fdm (repaire d).stl
0.19 MiB 12 min
<1 m
19 x 13 x 11 Download
47_Body_det4_fdm (repaire d).stl
0.19 MiB 11 min
<1 m
19 x 13 x 11 Download
48_Stand_fdm (repaired).s tl
49.61 MiB 20 h 44 min
12 m
Download
49_Frame_fdm (repaired).s tl
44.07 MiB 1 h
1 m
30 x 62 x 14 Download
51_JointB_X2_fdm (repaire d).stl
0.28 MiB 5 min
<1 m
6 x 6 x 12 Download
52_JointA_X2_fdm (repaire d).stl
0.28 MiB 8 min
<1 m
7 x 7 x 15 Download
53_EndgineLR_fdm (repaire d).stl
6.55 MiB 31 min
<1 m
Download
54_EndgineBR_fdm (repaire d).stl
6.42 MiB 55 min
<1 m
Download
56_CabinF_fdm (repaired). stl
33.64 MiB 7 h 1 min
4 m
Download
57_EngineBL_fdm (repaired ).stl
6.42 MiB 56 min
<1 m
10 x 38 x 24 Download
58_EngineLL_fdm (repaired ).stl
6.55 MiB 33 min
<1 m
9 x 29 x 19 Download
27_WingR_fdm (repaired).s tl
3.29 MiB 2 h 5 min
1 m
42 x 11 x 97 Download
28_WingL_fdm (repaired).s tl
3.29 MiB 2 h 7 min
1 m
42 x 11 x 97 Download
29_WingR1_fdm (repaired). stl
0.75 MiB 1 h 46 min
1 m
Download
30_WingL_1 (repaired).stl
0.75 MiB 1 h 41 min
1 m
35 x 5 x 77 Download
32_WindowB_fdm (repaired) .stl
8.01 MiB 17 min
<1 m
18 x 16 x 9 Download
33_BaseEngine2_fdm (repai red).stl
5.88 MiB 2 h 5 min
1 m
26 x 32 x 44 Download
50_WingR2_fdm (repaired). stl
1.94 MiB 2 h 16 min
1 m
88 x 20 x 51 Download
55_WingL2_fdm (repaired). stl
1.95 MiB 2 h 27 min
1 m
88 x 20 x 51 Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min
1 m
150 x 18 x 5 Download
12_BaseL_fdm (repaired).s tl
55.70 MiB 27 h 34 min
15 m
Download
13_BaseR_fdm (repaired).s tl
55.70 MiB 27 h 34 min
15 m
Download

ABOUT THIS 3D MODEL

Milano is a beautiful bird-inspired starship piloted by self-proclaimed "Star-Lord" Peter Quill in the course of the Guardians of the Galaxy’s adventures within the MCU. Lovingly named the Milano after his boyhood crush Alyssa Milano, Quill uses the elegant M-class spacecraft both as living quarters and in combat. While on a mission, Milano proved to be an exceptionally agile ship, carrying a pair of high-power twin mounted plasma cannons ready to unleash at the bad guys. The interior of the spacecraft is perfectly equipped to accommodate the notorious crew of misfits: Star-Lord, Rocket Raccoon, Groot, Gamora, and Drax are always on high alert to set out to save the universe or engage in any outlaw activity! The author of the graceful Milano figurine for 3D printing spent circa 155 hours working on the project for the Star Lord’s pride and joy to be presented in all its glory! The 3D artist made sure to include all delicate elements that distinguish Milano from other spacecraft to travel the universe. Thus, you are to work on the ship’s fine wing-tips, an impressive canopy, and a diamond-shaped observation bubble. The author of the model carefully carved and emphasized a countless number of the model’s details for you to come up with the most realistic Milano possible. Explore the universe with the Guardians of the Galaxy by 3D printing the trademark vehicle of the crew - Milano starship!

ADAPTATION FOR 3D PRINTING

Milano for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 45 hours in total. For you to receive the cleanest 3D printing result possible and to minimize the amount of filament needed for generated support the starship model was divided into many assembly parts, e.g. its wing-tips, diamond-shaped observation bubble, main engine, single engines, canopy frame, cockpit, etc. are provided as separate STL files. The windows on the canopy (+ smaller windows on the ship’s body) are also provided as nine separate files for you to print them using transparent filament or access the highly detailed interior of the Guardian’s cockpit. There can also be found special tunnels throughout the hollow body of Milano that were designed by our team for you to easily introduce LED wiring for illumination of the cockpit, smaller windows, and the main engine. For you to display the Milano model among your spaceship collection there is a stand provided. In order for you to display the 3D printed Star-Lords’s vehicle in different flight modes as if during the battle, the wing-tips and single rear engines were made adjustable with the help of special connectors introduced. All assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the actual wingspan of Milano that is 39000 mm. The 3D printing model's chosen scale is 1/100 for FFF/FDM version and 1/200 for DLP/SLA/SLS version.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 58 parts;
- A printed model is 168 mm tall, 398 mm wide, 183 mm deep;
- Assembly kit includes lock 20_Ge_lock_x3 to attach the model's parts securely without glue that needs to be printed 3 times;
- Made with adjustable wing-tips and single rear engines for different flight modes during the battle;
- Windows on the canopy, as well as smaller windows on the ship's body, are provided separately to be printed with the transparent filament for you to access the highly-detailed cockpit;
- Tunnels throughout the starship's body are provided for LED wiring to light up the cockpit, smaller windows, and the main engine;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA/SLS 1.0 version features:
- Contains 45 parts;
- A printed model is 84 mm tall, 199 mm wide, 92 mm deep;
- Made with adjustable wing-tips and single rear engines for different flight modes during the battle;
- Windows on the canopy, as well as smaller windows on the ship's body, are provided separately to be printed with the transparent filament for you to access the highly-detailed cockpit;
- Tunnels throughout the starship's body are provided for LED wiring to light up the cockpit, smaller windows, and the main engine;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Milano​​​​ Model for 3D printing which consist of 103 parts;
- 2 versions of files for this model for FFF/FDM and DLP/SLA/SLS printers;
- High-poly detailed model of Milano​​​​​​;
Assembly Manual for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format;
- Detailed settings that we provide as a recommendation for Cura 3.5.1, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the model of Milano for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Milano 3D Printing Model at Gambody YouTube channel.

Also, you may like Guardians of the Galaxy 3D Printing Figurines as well as other Space Ships 3D Printing Models.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.4.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell
Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill
Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material
Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s

Speed 
Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 3 mm
Support Z Distance: 0.1 mm
    Support Top Distance: 0.1 mm
    Support Bottom Distance: 0.1 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings